MCP6033-E/SN
- Mfr.Part #
- MCP6033-E/SN
- Manufacturer
- Microchip Technology
- Package / Case
- 8-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 1 CIRCUIT 8SOIC
- Stock
- 1
- In Stock :
- 1
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Current - Input Bias :
- 1pA
- Supply Voltage Limit-Max :
- 7V
- Voltage - Supply, Single/Dual (±) :
- 1.8V~5.5V
- Product Type :
- Precision Amplifiers
- Input Bias Current :
- 100 pA
- Amplifier Type :
- GENERAL PURPOSE
- ECCN Code :
- EAR99
- Supply Voltage :
- 1.8V
- Maximum Operating Temperature :
- + 125 C
- Number of Terminations :
- 8
- Input Offset Voltage (Vos) :
- 150μV
- Supplier Device Package :
- 8-SOIC
- Reach Compliance Code :
- Compliant
- Operating Temperature :
- -40°C~125°C
- Unity Gain BW-Nom :
- 10000 kHz
- Width :
- 3.9116mm
- Programmable Power :
- No
- Architecture :
- VOLTAGE-FEEDBACK
- Package / Case :
- 8-SOIC (0.154, 3.90mm Width)
- Voltage - Input Offset :
- 150μV
- Min Supply Voltage :
- 1.8 V
- Max Operating Temperature :
- 125 °C
- Output Current per Channel :
- 23mA
- Voltage Gain :
- 115dB
- Shutdown :
- No Shutdown
- Operating Supply Current :
- 900nA
- Height :
- 1.2446mm
- Power Supply Type :
- Single
- Packaging :
- Tube
- Low-Offset :
- yes
- Peak Reflow Temperature (Cel) :
- 260
- Power Supplies :
- 2/5V
- Pbfree Code :
- yes
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Gain Bandwidth Product :
- 10kHz
- Average Bias Current-Max (IIB) :
- 0.005μA
- JESD-30 Code :
- R-PDSO-G8
- Max Frequency :
- 1kHz
- Lifecycle Status :
- Production (Last Updated: 2 years ago)
- Manufacturer :
- Microchip
- Series :
- --
- Factory Lead Time :
- 9 Weeks
- Slew Rate :
- 0.004V/µs
- JESD-609 Code :
- e3
- Min Operating Temperature :
- -40 °C
- Bandwidth :
- 10 kHz
- Package Shape :
- RECTANGULAR
- Operating Supply Voltage :
- 5.5 V
- Number of Elements :
- 1
- Seated Height-Max :
- 1.75 mm
- Mount :
- Surface Mount
- Supply Type :
- Single
- Common Mode Rejection Ratio :
- 70 dB
- Terminal Form :
- Gull wing
- Voltage Gain-Min :
- 56200
- Voltage Gain dB :
- 115 dB
- Number of Terminals :
- 8
- Terminal Position :
- Dual
- Terminal Pitch :
- 1.27 mm
- Qualification :
- AEC-Q100
- Number of Channels per Chip :
- 1
- Number of Functions :
- 1
- Output Type :
- Rail-to-Rail
- Base Part Number :
- MCP6033
- Product Category :
- Precision Amplifiers
- Number of Amplifiers :
- 1
- Max Supply Voltage :
- 5.5 V
- Surface Mount :
- yes
- Power Supply Rejection Ratio (PSRR) :
- 70dB
- Qualification Status :
- Not Qualified
- Product :
- Precision Amplifiers
- Supply Current-Max :
- 1.35 mA
- Mounting :
- Surface Mount
- Number of Circuits :
- 1
- RoHS :
- Compliant
- Supplier Package :
- SOIC N
- Brand :
- Microchip Technology
- Lead Free :
- Lead Free
- Temperature Grade :
- Automotive
- HTS Code :
- 8542.33.00.01
- Mounting Type :
- Surface Mount
- Mounting Style :
- SMD/SMT
- REACH SVHC :
- No SVHC
- Micropower :
- yes
- Maximum Operating Supply Voltage :
- 5.5 V
- Current - Supply :
- 900nA
- Number of Pins :
- 8
- Power :
- No
- RoHS Status :
- ROHS3 Compliant
- Type :
- General Purpose Amplifier
- Input Offset Voltage-Max :
- 150 µV
- Packing Method :
- Tube
- Number of Channels :
- 1
- Length :
- 4.8768mm
- Package :
- Tube
- Nominal Supply Current :
- 900nA
- Pin Count :
- 8
- Frequency Compensation :
- yes
- Wideband :
- No
- Product Status :
- Active
- Radiation Hardening :
- No
- Minimum Operating Temperature :
- - 40 C
- Published :
- 2000
- Bias Current-Max (IIB) @25C :
- 0.0001 µA
- Output Current :
- 23mA
- Low-Bias :
- yes
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Terminal Finish :
- Matte Tin (Sn)
- Shut Down Support :
- No
- Base Product Number :
- MCP6033
- Datasheets
- MCP6033-E/SN

1 Channels 23mA per Channel 1pA 70 dB Instrumentational OP Amps 0.005μA 5.5 V 1.8V~5.5V MCP6033 8 Pins 8-SOIC (0.154, 3.90mm Width)
MCP6033-E/SN Overview
Packaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. A General Purpose-type buffer amplifier is shown here. There is a Tube case that is delivered with the instrumentation amplifiers. A total of 8 terminations have been reported in the past few weeks. Buffer amplifier has a total of 8 pins on it. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 1.8V. An 8-pin op amp ic is included in the package. With regards to the offset voltage of the input, buffer amplifier is rated at 150μV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. Using a supply current of 900nA , this buffer op amp will be able to operate. 115dB should be the voltage gain. The buffer amp consists of 1 circuits in total. 1 channels are available on the instrumentation amplifier. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. This op amp needs to be operated at a temperature of not less than -40 °C degrees Celsius in order to function properly. You should not use op amp above 125 °C . There is an operating supply voltage rating of 1 for this operational amplifier, which is rated at the manufacturer. The operating supply voltage of the buffer op amp is rated at 5.5 V. A TUBE-shaped amplifier is used to pack the buffer amps. A supply of 900nA or higher is recommended for use with this electronic part. Regarding the voltage of the supply, this electrical part can work from a voltage as low as 5.5 V, and this is an excellent feature. In order to ensure that the instrumentation amplifier's supply voltage remains above 1.8 V, it is recommended to keep it higher. The -- stands for the buffer op amp's serial number. There are a maximum of 56200 voltage gains that can be conducted by this operational amplifier at its minimum voltage gain. As you can see, the linear amplifier has 1 amplifiers. The buffer op amp has 8 terminals that can be used for connecting wires to the amplifier.
MCP6033-E/SN Features
8 Pins
supply voltage of 1.8V
115dB voltage gain
Output Type: Rail-to-Rail
8Terminations
MCP6033-E/SN Applications
There are a lot of Microchip Technology
MCP6033-E/SN Instrumentational OP Amps applications.
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















