MCP602T-I/ST
- Mfr.Part #
- MCP602T-I/ST
- Manufacturer
- Microchip Technology
- Package / Case
- 8-TSSOP (0.173, 4.40mm Width)
- Datasheet
- Download
- Description
- IC CMOS 2 CIRCUIT 8TSSOP
- Stock
- 7,441
- In Stock :
- 7,441
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Micropower :
- yes
- Qualification :
- AEC-Q100
- Voltage Gain-Min :
- 56200
- Supply Voltage Limit-Max :
- 7V
- Base Product Number :
- MCP602
- Package Shape :
- RECTANGULAR
- Reach Compliance Code :
- Compliant
- Amplifier Type :
- GENERAL PURPOSE
- Output Current per Channel :
- 22mA
- ECCN Code :
- EAR99
- Mounting Style :
- SMD/SMT
- Terminal Finish :
- Matte Tin (Sn)
- Screening Level :
- Industrial
- Operating Temperature :
- -40°C~85°C
- Maximum Operating Supply Voltage :
- 6 V
- Number of Circuits :
- 2
- Frequency Compensation :
- yes
- Number of Terminals :
- 8
- Base Part Number :
- MCP602
- Voltage Gain :
- 115dB
- RoHS Status :
- ROHS3 Compliant
- Supplier Device Package :
- 8-TSSOP
- Series :
- --
- Current - Supply :
- 230μA
- Output Type :
- Rail-to-Rail
- MSL :
- MSL 1 - Unlimited
- Power Supplies :
- 3/5V
- Product Category :
- Operational Amplifiers - Op Amps
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Gain Bandwidth Product :
- 2.8MHz
- Radiation Hardening :
- No
- Mount :
- Surface Mount
- Height Seated (Max) :
- 1.1mm
- Voltage Gain dB :
- 115 dB
- Power Supply Rejection Ratio (PSRR) :
- 80dB
- Packing Method :
- Tape and Reel
- Unity Gain BW-Nom :
- 2800 kHz
- Type :
- General Purpose Amplifier
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Terminal Pitch :
- 0.65mm
- Product Type :
- Op Amps - Operational Amplifiers
- Operating Supply Voltage :
- 5.5V
- JESD-609 Code :
- e3
- JESD-30 Code :
- R-PDSO-G8
- Input Offset Voltage-Max :
- 3000 µV
- Input Offset Voltage (Vos) :
- 2mV
- Architecture :
- VOLTAGE-FEEDBACK
- Published :
- 2007
- Package :
- Tape and Reel (TR);Cut Tape (CT);Digi-Reel®;
- Low-Offset :
- No
- Width :
- 4.4 mm
- Lead Free :
- Lead Free
- Number of Functions :
- 2
- Package Type :
- SOIC
- Rail to Rail :
- Rail to Rail Output
- Temperature Grade :
- Industrial
- Voltage - Supply, Single/Dual (±) :
- 2.7V~6V
- Maximum Operating Temperature :
- + 85 C
- Terminal Form :
- Gull wing
- Bandwidth :
- 2.8MHz
- Peak Reflow Temperature (Cel) :
- 260
- Number of Channels :
- 2 Channel
- Output Current :
- 22mA
- Number of Terminations :
- 8
- Shutdown :
- No Shutdown
- RoHS :
- Details
- Current - Input Bias :
- 1pA
- Supply Type :
- Single
- Current - Output / Channel :
- 22mA
- Minimum Operating Temperature :
- - 40 C
- Surface Mount :
- yes
- Number of Pins :
- 8
- Supply Current-Max :
- 0.65 mA
- Brand :
- Microchip Technology / Atmel
- Mounting :
- Surface Mount
- HTS Code :
- 8542.33.00.01
- Number of Elements :
- 2
- Number of Channels per Chip :
- 2
- Factory Lead Time :
- 10 Weeks
- Voltage - Input Offset :
- 700µV
- Pbfree Code :
- yes
- Height :
- 1 mm
- Supplier Package :
- TSSOP
- Supply Voltage :
- 5V
- Pin Count :
- 8
- Slew Rate :
- 2.3V/µs
- Nominal Supply Current :
- 230μA
- Terminal Position :
- Dual
- Operating Supply Current :
- 230μA
- Qualification Status :
- Not Qualified
- Length :
- 4.4mm
- Low-Bias :
- yes
- Common Mode Rejection Ratio :
- 75 dB
- Manufacturer :
- Microchip
- Packaging :
- Tape and Reel (TR)
- Power Supply Type :
- Single
- Mounting Type :
- Surface Mount
- Product Status :
- Active
- Seated Height-Max :
- 1.1 mm
- Package / Case :
- 8-TSSOP (0.173, 4.40mm Width)
- Product :
- Operational Amplifiers
- Average Bias Current-Max (IIB) :
- 0.00006μA
- Datasheets
- MCP602T-I/ST
2 Channel Channels 22mA per Channel 1pA 75 dB Instrumentational OP Amps 0.00006μA 5.5V 2.7V~6V MCP602 8 Pins 8-TSSOP (0.173, 4.40mm Width)
MCP602T-I/ST Overview
In order to protect the op amps, a 8-TSSOP (0.173, 4.40mm Width) case is used. There are two types of operational amplifiers in this circuit. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 8. It consists of a total of 8 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. It has 8 pins that make up the linear amplifier. In terms of input offset voltage, operational amplifier rates 2mV. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. In order for this instrumentation amplifier to operate, the supply current needs to be between 230μA and 10 . 115dB should remain the voltage gain. In total, there are 2 circuits on this buffer amplifier. Buffer op amp is equipped with 2 Channel channels on the device. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. For the operating supply voltage of the op amp ic, there is a rating of 2. The operating supply voltage of the buffer op amp is rated at 5.5V. As a result of this, the buffer amplifier is packed in TAPE AND REEL. This electronic part is recommended to be used with an 230µA supply for best performance. -- is the number that corresponds to the series of the buffer op amp. A minimum voltage gain of 56200 is the minimum voltage gain that this instrumentation amplifier is capable of producing. As part of this op amp ic, there are 8 terminals on which wires can be connected.
MCP602T-I/ST Features
8 Pins
supply voltage of 5V
115dB voltage gain
Output Type: Rail-to-Rail
8Terminations
MCP602T-I/ST Applications
There are a lot of Microchip Technology
MCP602T-I/ST Instrumentational OP Amps applications.
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















