MCP602-E/ST
- Mfr.Part #
- MCP602-E/ST
- Manufacturer
- Microchip Technology
- Package / Case
- 8-TSSOP (0.173, 4.40mm Width)
- Datasheet
- Download
- Description
- IC CMOS 2 CIRCUIT 8TSSOP
- Stock
- 534
- In Stock :
- 534
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Screening Level :
- Extended Industrial
- Height :
- 1.05mm
- Published :
- 2007
- Minimum Operating Temperature :
- - 40 C
- REACH SVHC :
- No SVHC
- Seated Height-Max :
- 1.1 mm
- Unity Gain BW-Nom :
- 2800 kHz
- Peak Reflow Temperature (Cel) :
- 260
- Voltage - Input Offset :
- 700µV
- Voltage - Supply, Single/Dual (±) :
- 2.7V~6V
- Terminal Position :
- Dual
- Lead Free :
- Lead Free
- Qualification :
- AEC-Q100
- RoHS Status :
- ROHS3 Compliant
- Product :
- Operational Amplifiers
- Brand :
- Microchip Technology / Atmel
- Average Bias Current-Max (IIB) :
- 0.005μA
- Package :
- Tube
- Voltage Gain :
- 115dB
- Voltage Gain-Min :
- 56200
- Slew Rate :
- 2.3V/µs
- Product Status :
- Active
- Length :
- 3.1mm
- Nominal Supply Current :
- 230μA
- Number of Pins :
- 8
- Number of Circuits :
- 2
- Current - Supply :
- 230μA
- Input Offset Voltage-Max :
- 4500 µV
- Operating Supply Voltage :
- 5.5V
- Operating Temperature :
- -40°C~125°C
- Maximum Operating Temperature :
- + 125 C
- Manufacturer :
- Microchip
- Power Supply Type :
- Single
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Series :
- --
- Supplier Device Package :
- 8-TSSOP
- Mounting Type :
- Surface Mount
- Product Type :
- Op Amps - Operational Amplifiers
- Temperature Grade :
- Automotive
- Supplier Package :
- TSSOP
- Low-Offset :
- No
- Terminal Finish :
- Matte Tin (Sn)
- JESD-609 Code :
- e3
- Type :
- General Purpose Amplifier
- Amplifier Type :
- GENERAL PURPOSE
- Input Offset Voltage (Vos) :
- 2mV
- Mount :
- Surface Mount
- Gain Bandwidth Product :
- 2.8MHz
- Package / Case :
- 8-TSSOP (0.173, 4.40mm Width)
- HTS Code :
- 8542.33.00.01
- Qualification Status :
- Not Qualified
- Number of Channels :
- 2
- Micropower :
- yes
- Architecture :
- VOLTAGE-FEEDBACK
- Base Part Number :
- MCP602
- Current - Output / Channel :
- 22mA
- Bandwidth :
- 2.8MHz
- Package Shape :
- RECTANGULAR
- Number of Terminals :
- 8
- Base Product Number :
- MCP602
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Output Current per Channel :
- 22 mA
- RoHS :
- Details
- Current - Input Bias :
- 1pA
- ECCN Code :
- EAR99
- Supply Voltage Limit-Max :
- 7V
- Shut Down Support :
- No
- Number of Terminations :
- 8
- Output Current :
- 22mA
- Operating Supply Current :
- 23 uA
- Power Supplies :
- 3/5V
- Number of Functions :
- 2
- JESD-30 Code :
- R-PDSO-G8
- Common Mode Rejection Ratio :
- 75 dB
- Max Frequency :
- 10kHz
- Packaging :
- Tube
- Power Supply Rejection Ratio (PSRR) :
- 80dB
- Maximum Operating Supply Voltage :
- 6 V
- Supply Voltage :
- 5V
- Radiation Hardening :
- No
- Product Category :
- Operational Amplifiers - Op Amps
- Reach Compliance Code :
- Compliant
- Pbfree Code :
- yes
- Mounting :
- Surface Mount
- Supply Type :
- Single
- Width :
- 4.5mm
- Terminal Form :
- Gull wing
- Terminal Pitch :
- 0.65mm
- MSL :
- MSL 1 - Unlimited
- Surface Mount :
- yes
- Number of Channels per Chip :
- 2
- Mounting Style :
- SMD/SMT
- Pin Count :
- 8
- Shutdown :
- No Shutdown
- Voltage Gain dB :
- 115 dB
- Output Type :
- Rail-to-Rail
- Frequency Compensation :
- yes
- Low-Bias :
- yes
- Supply Current-Max :
- 0.65 mA
- Factory Lead Time :
- 10 Weeks
- Datasheets
- MCP602-E/ST
2 Channels 22 mA per Channel 1pA 75 dB Instrumentational OP Amps 0.005μA 5.5V 2.7V~6V MCP602 8 Pins 8-TSSOP (0.173, 4.40mm Width)
MCP602-E/ST Overview
It is packaged in an 8-TSSOP (0.173, 4.40mm Width)-case that protects the operational amplifiers from damage. An op amp of this type is a General Purpose-type. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. It is estimated that there will be at least 8 terminations this year. A total of 8 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. In total, the buffer amplifier consists of 8 pins. Op amp ic rates 2mV for input offset voltage. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. A supply current of 23 uA can be used to operate this linear amplifier. There should be no change in the voltage gain at 115dB. This op amp ic has 2 circuits. There are a total of 2 channels available on the op amps. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. The operating supply voltage of the buffer op amp is rated at 5.5V. For optimal performance, this electrical part should be connected to a supply with a current of 230µA. Buffer op amp series numbers are indicated by the --. This op amp ic can conduct a minimum voltage gain of 56200. There are 8 wire terminals on this op amp ic.
MCP602-E/ST Features
8 Pins
supply voltage of 5V
115dB voltage gain
Output Type: Rail-to-Rail
8Terminations
MCP602-E/ST Applications
There are a lot of Microchip Technology
MCP602-E/ST Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















