MCP601-E/ST
- Mfr.Part #
- MCP601-E/ST
- Manufacturer
- Microchip Technology
- Package / Case
- 8-TSSOP (0.173, 4.40mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 1 CIRCUIT 8TSSOP
- Stock
- 953
- In Stock :
- 953
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Voltage Gain :
- 115dB
- Surface Mount :
- yes
- Input Offset Voltage-Max :
- 4500 µV
- Voltage Gain dB :
- 115 dB
- Operating Supply Current :
- 230μA
- Temperature Grade :
- Automotive
- Output Current per Channel :
- 22mA
- Supplier Device Package :
- 8-TSSOP
- HTS Code :
- 8542.33.00.01
- Voltage - Supply, Single/Dual (±) :
- 2.7V~6V
- Slew Rate :
- 2.3V/µs
- Amplifier Type :
- GENERAL PURPOSE
- Supply Current-Max :
- 0.325 mA
- Seated Height-Max :
- 1.1 mm
- Average Bias Current-Max (IIB) :
- 0.005μA
- Package :
- Tube
- Width :
- 4.4 mm
- Qualification :
- AEC-Q100
- Peak Reflow Temperature (Cel) :
- 260
- Operating Supply Voltage :
- 5.5V
- Architecture :
- VOLTAGE-FEEDBACK
- Mounting :
- Surface Mount
- Supply Type :
- Single
- Radiation Hardening :
- No
- Terminal Finish :
- Matte Tin (Sn)
- Number of Terminals :
- 8
- Shut Down Support :
- No
- Current - Supply :
- 230μA
- Mounting Type :
- Surface Mount
- Screening Level :
- Extended Industrial
- Number of Channels :
- 1 Channel
- Terminal Form :
- Gull wing
- Mount :
- Surface Mount
- Nominal Supply Current :
- 230μA
- Package Shape :
- RECTANGULAR
- Common Mode Rejection Ratio :
- 75 dB
- Reach Compliance Code :
- Compliant
- Power Supply Type :
- Single
- JESD-30 Code :
- R-PDSO-G8
- Terminal Position :
- Dual
- Product :
- Operational Amplifiers
- Supply Voltage Limit-Max :
- 7V
- Number of Circuits :
- 1
- Programmable Power :
- No
- Current - Input Bias :
- 1pA
- Type :
- General Purpose Amplifier
- Mounting Style :
- SMD/SMT
- Voltage Gain-Min :
- 56200
- Length :
- 4.4mm
- Unity Gain BW-Nom :
- 2800 kHz
- Wideband :
- No
- Power Supply Rejection Ratio (PSRR) :
- 80dB
- Supply Voltage :
- 5V
- Micropower :
- yes
- Qualification Status :
- Not Qualified
- Voltage - Input Offset :
- 700µV
- Base Part Number :
- MCP601
- Packaging :
- Tube
- Terminal Pitch :
- 0.65mm
- Pbfree Code :
- yes
- Number of Elements :
- 1
- Published :
- 2007
- Frequency Compensation :
- yes
- Output Type :
- Rail-to-Rail
- Maximum Operating Temperature :
- + 125 C
- Product Category :
- Operational Amplifiers - Op Amps
- Operating Temperature :
- -40°C~125°C
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Power :
- No
- RoHS :
- Details
- Package / Case :
- 8-TSSOP (0.173, 4.40mm Width)
- Number of Channels per Chip :
- 1
- Pin Count :
- 8
- Shutdown :
- No Shutdown
- Number of Terminations :
- 8
- Low-Bias :
- yes
- Gain Bandwidth Product :
- 2.8MHz
- Input Offset Voltage (Vos) :
- 2mV
- Lead Free :
- Lead Free
- RoHS Status :
- ROHS3 Compliant
- Current - Output / Channel :
- 22mA
- Brand :
- Microchip Technology
- Output Current :
- 22mA
- JESD-609 Code :
- e3
- Number of Functions :
- 1
- Base Product Number :
- MCP601
- Power Supplies :
- 3/5V
- Factory Lead Time :
- 6 Weeks
- Manufacturer :
- Microchip
- Product Type :
- Op Amps - Operational Amplifiers
- Product Status :
- Active
- Supplier Package :
- TSSOP
- Minimum Operating Temperature :
- - 40 C
- Low-Offset :
- No
- Common-mode Reject Ratio-Min :
- 75 dB
- Maximum Operating Supply Voltage :
- 6 V
- ECCN Code :
- EAR99
- Height :
- 1 mm
- Number of Pins :
- 8
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Series :
- --
- Datasheets
- MCP601-E/ST
1 Channel Channels 22mA per Channel 1pA 75 dB Instrumentational OP Amps 0.005μA 5.5V 2.7V~6V MCP601 8 Pins 8-TSSOP (0.173, 4.40mm Width)
MCP601-E/ST Overview
It is packaged in an 8-TSSOP (0.173, 4.40mm Width)-case that protects the operational amplifiers from damage. An op amp of this type is a General Purpose-type. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. It is estimated that there will be at least 8 terminations this year. A total of 8 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. In total, the buffer amplifier consists of 8 pins. Op amp ic rates 2mV for input offset voltage. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. A supply current of 230μA can be used to operate this linear amplifier. There should be no change in the voltage gain at 115dB. This op amp ic has 1 circuits. There are a total of 1 Channel channels available on the op amps. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. There are 1 elements in this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 5.5V. For optimal performance, this electrical part should be connected to a supply with a current of 230µA. Buffer op amp series numbers are indicated by the --. This op amp ic can conduct a minimum voltage gain of 56200. There are 8 wire terminals on this op amp ic.
MCP601-E/ST Features
8 Pins
supply voltage of 5V
115dB voltage gain
Output Type: Rail-to-Rail
8Terminations
MCP601-E/ST Applications
There are a lot of Microchip Technology
MCP601-E/ST Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















