MCP6002-E/P
- Mfr.Part #
- MCP6002-E/P
- Manufacturer
- Microchip Technology
- Package / Case
- 8-DIP (0.300, 7.62mm)
- Datasheet
- Download
- Description
- IC OPAMP GP 2 CIRCUIT 8DIP
- Stock
- 6,921
- In Stock :
- 6,921
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Number of Terminals :
- 8
- Screening Level :
- Extended
- Rad Hardened :
- No
- Base Product Number :
- MCP6002
- Temperature Grade :
- Automotive
- Unity Gain BW-Nom :
- 1000 kHz
- Product Status :
- Active
- Number of Terminations :
- 8
- Operating Temperature Classification :
- Automotive
- Input Offset Voltage :
- 4.5(mV)
- Voltage Gain dB :
- 112 dB
- Input Offset Voltage (Vos) :
- 4.5mV
- Base Part Number :
- MCP6002
- Package / Case :
- 8-DIP (0.300, 7.62mm)
- Voltage Gain in dB :
- 112(dB)
- Seated Height-Max :
- 5.33 mm
- Power Supply Rejection Ratio (PSRR) :
- 86dB
- Slew Rate :
- 0.6V/µs
- Low-Offset :
- No
- Shutdown :
- No Shutdown
- Input Bias Current :
- 0.001(nA)
- Product Category :
- Operational Amplifiers - Op Amps
- Operating Supply Current :
- 100μA
- Factory Lead Time :
- 12 Weeks
- Radiation Hardening :
- No
- Terminal Pitch :
- 2.54 mm
- Power Supplies :
- 2/5 V
- Pin Count :
- 8
- Series :
- --
- Mount :
- Through Hole
- Single Supply Voltage (Typ) :
- 3/5(V)
- Height :
- 3.3mm
- Voltage - Supply, Single/Dual (±) :
- 1.8V~6V
- Supply Voltage Limit-Max :
- 7V
- HTS Code :
- 8542.39.00.01
- Voltage Gain :
- 112dB
- Reach Compliance Code :
- Compliant
- Length :
- 9.27mm
- Terminal Finish :
- Matte Tin (Sn)
- Supply Voltage :
- 5V
- Output Type :
- Rail-to-Rail
- Voltage Gain-Min :
- 25110
- Current - Supply :
- 100μA
- Operating Temp Range :
- -40C to 125C
- Bandwidth :
- 1MHz
- Manufacturer :
- Microchip
- Current - Input Bias :
- 1pA
- Terminal Position :
- Dual
- Power Supply Requirement :
- Single
- Width :
- 6.35mm
- Number of Pins :
- 8
- Gain Bandwidth Product :
- 1MHz
- Micropower :
- yes
- Low-Bias :
- No
- Power :
- No
- Wideband :
- No
- Number of Channels per Chip :
- 2
- JESD-609 Code :
- e3
- Maximum Operating Supply Voltage :
- 6 V
- Nominal Supply Current :
- 100μA
- Type :
- General Purpose Amplifier
- Mounting :
- Through Hole
- Supply Current-Max :
- 0.34 mA
- Frequency Compensation :
- yes
- Shut Down Feature :
- No
- Output Current per Channel :
- 23mA
- Dual Supply Voltage (Typ) :
- Not Required(V)
- Dual Supply Voltage (Max) :
- Not Required(V)
- Surface Mount :
- No
- Voltage - Input Offset :
- 4.5mV
- Supply Type :
- Single
- Single Supply Voltage (Min) :
- 1.8(V)
- Package Shape :
- RECTANGULAR
- Number of Channels :
- 2
- Number of Elements :
- 2
- RoHS Status :
- ROHS3 Compliant
- Single Supply Voltage (Max) :
- 6(V)
- Mounting Style :
- Through Hole
- JESD-30 Code :
- R-PDIP-T8
- Mounting Type :
- Through Hole
- Terminal Form :
- THROUGH-HOLE
- Unity Gain Bandwidth Product :
- 1
- Current - Output / Channel :
- 23mA
- Maximum Input Offset Current :
- 0.000001(TYP)@5.5V
- Packaging :
- Tube
- Power Supply Rejection Ratio :
- 86(dB)
- Peak Reflow Temperature (Cel) :
- Not Applicable
- Common Mode Rejection Ratio :
- 60 dB
- Number of Functions :
- 2
- RoHS :
- Details
- Pbfree Code :
- yes
- Package Type :
- PDIP
- REACH SVHC :
- No SVHC
- ECCN Code :
- EAR99
- Brand :
- Microchip Technology / Atmel
- Operating Temperature :
- -40°C~125°C
- Programmable Power :
- No
- MSL :
- -
- Package :
- Tube
- Input Offset Voltage-Max :
- 4500 µV
- Supplier Device Package :
- 8-PDIP
- Amplifier Type :
- GENERAL PURPOSE
- Lead Free :
- Lead Free
- Architecture :
- VOLTAGE-FEEDBACK
- Qualification :
- AEC-Q100
- Dual Supply Voltage (Min) :
- Not Required(V)
- Output Current :
- 23mA
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Operating Supply Voltage :
- 5.5V
- Supplier Package :
- PDIP
- Number of Circuits :
- 2
- Product Type :
- Op Amps - Operational Amplifiers
- Qualification Status :
- Not Qualified
- Minimum Operating Temperature :
- - 40 C
- Product :
- Operational Amplifiers
- Published :
- 2005
- Maximum Operating Temperature :
- + 125 C
- Datasheets
- MCP6002-E/P

2 Channels 23mA per Channel 1pA 60 dB Instrumentational OP Amps 5.5V 1.8V~6V MCP6002 8 Pins 8-DIP (0.300, 7.62mm)
MCP6002-E/P Overview
Packaged in a 8-DIP (0.300, 7.62mm) case, the buffer op amp is ready to use. An op amp ic of the General Purpose type. The op amp is delivered to you in a Tube case. There is a growing number of terminations approaching the number of 8. The pins on this board total to 8 in total. I would like to remind you that this buffer op amp should be powered by an 5V battery. A total of 8 pins are present on the instrumentation amplifier. There is an input offset voltage of 4.5mV for this buffer op amp. The mounting type that is recommended for this electrical part is Through Hole. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . As long as the supply current of the chip does not exceed 100μA, this op amp ic can operate. 112dB should remain the voltage gain. During the manufacturing process, this buffer amplifier is divided into 2 circuits. As far as the device is concerned, buffer amplifier has 2 channels. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. The linear amplifier consists of 2 different elements in total. The operating supply voltage of the buffer op amp is rated at 5.5V. As a result, it is recommended that a power supply of 100µA be used with this electronic part. As the name implies, -- refers to the series of the buffer op amp. It is necessary to keep in mind that this instrumentation amplifier is able to conduct a minimum voltage gain of 25110. The buffer op amp is equipped with 8 terminals for attaching wires to it.
MCP6002-E/P Features
8 Pins
supply voltage of 5V
112dB voltage gain
Output Type: Rail-to-Rail
8Terminations
MCP6002-E/P Applications
There are a lot of Microchip Technology
MCP6002-E/P Instrumentational OP Amps applications.
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















