MCP6002-E/MC
- Mfr.Part #
- MCP6002-E/MC
- Manufacturer
- Microchip Technology
- Package / Case
- 8-VFDFN Exposed Pad
- Datasheet
- Download
- Description
- IC OPAMP GP 2 CIRCUIT 8DFN
- Stock
- 30,392
- In Stock :
- 30,392
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Peak Reflow Temperature (Cel) :
- 260
- Output Current :
- 23mA
- Current - Output / Channel :
- 23 mA
- Product :
- Operational Amplifiers
- Pbfree Code :
- yes
- JESD-30 Code :
- R-PDSO-N8
- Lead Free :
- Lead Free
- Base Part Number :
- MCP6002
- Width :
- 3mm
- Manufacturer :
- Microchip
- Supplier Package :
- DFN EP
- Mounting :
- Surface Mount
- Qualification Status :
- Not Qualified
- Input Offset Voltage (Vos) :
- 4.5mV
- Surface Mount :
- yes
- Mounting Type :
- Surface Mount
- Brand :
- Microchip Technology / Atmel
- Number of Terminations :
- 8
- Bandwidth :
- 1MHz
- Low-Offset :
- No
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- HTS Code :
- 8542.39.00.01
- Product Status :
- Active
- Operating Supply Current :
- 100 uA
- Gain Bandwidth Product :
- 1MHz
- Mounting Style :
- SMD/SMT
- Package / Case :
- 8-VFDFN Exposed Pad
- Power Supply Rejection Ratio (PSRR) :
- 86dB
- Shutdown :
- No Shutdown
- Voltage - Supply, Single/Dual (±) :
- 1.8V~6V
- Dimensions :
- 2 x 3 x 0.95mm
- Terminal Finish :
- Matte Tin (Sn) - annealed
- Terminal Position :
- Dual
- Rail to Rail :
- Rail to Rail Input/Output
- Package :
- Tube
- Architecture :
- VOLTAGE-FEEDBACK
- Number of Channels :
- 2 Channel
- Packaging :
- Tube
- Current - Supply :
- 100μA
- Height :
- 950μm
- Programmable Power :
- No
- Published :
- 2008
- Output Current per Channel :
- 23 mA
- Temperature Grade :
- Automotive
- Voltage Gain :
- 112dB
- Number of Channels per Chip :
- 2
- Supply Current-Max :
- 0.34 mA
- Maximum Operating Supply Voltage :
- 6 V
- Number of Pins :
- 8
- Slew Rate :
- 0.6V/µs
- ECCN Code :
- EAR99
- Base Product Number :
- MCP6002
- Package Type :
- DFN
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Current - Input Bias :
- 1pA
- Frequency Compensation :
- yes
- Qualification :
- AEC-Q100
- Low-Bias :
- No
- Amplifier Type :
- GENERAL PURPOSE
- Number of Elements :
- 2
- Wideband :
- No
- Minimum Operating Temperature :
- -40 °C
- Reach Compliance Code :
- Compliant
- Length :
- 2mm
- Voltage Gain dB :
- 112 dB
- Unity Gain BW-Nom :
- 1000 kHz
- Type :
- General Purpose Amplifier
- Product Type :
- Op Amps - Operational Amplifiers
- Power Supplies :
- 2/5 V
- Nominal Supply Current :
- 100μA
- Product Category :
- Operational Amplifiers - Op Amps
- Seated Height-Max :
- 1 mm
- Number of Functions :
- 2
- Operating Supply Voltage :
- 5.5V
- RoHS :
- Details
- Number of Terminals :
- 8
- RoHS Status :
- ROHS3 Compliant
- Number of Circuits :
- 2
- Maximum Operating Temperature :
- +125 °C
- Supply Voltage :
- 5V
- JESD-609 Code :
- e3
- Radiation Hardening :
- No
- Series :
- --
- Screening Level :
- Extended
- Power :
- No
- Power Supply Type :
- Single
- Input Offset Voltage-Max :
- 4500 µV
- Supply Type :
- Single
- Supplier Device Package :
- 8-DFN (2x3)
- Operating Temperature :
- -40°C~125°C
- Voltage Gain-Min :
- 25110
- Factory Lead Time :
- 12 Weeks
- Terminal Pitch :
- 0.5mm
- Terminal Form :
- NO LEAD
- Package Shape :
- RECTANGULAR
- Output Type :
- Rail-to-Rail
- Supply Voltage Limit-Max :
- 7V
- Max Frequency :
- 1kHz
- Common Mode Rejection Ratio :
- 60 dB
- Mount :
- Surface Mount
- Voltage - Input Offset :
- 4.5mV
- Micropower :
- yes
- Pin Count :
- 8
- Datasheets
- MCP6002-E/MC
MCP6002-E/MC Documents

2 Channel Channels 23 mA per Channel 1pA 60 dB Instrumentational OP Amps 5.5V 1.8V~6V MCP6002 8 Pins 8-VFDFN Exposed Pad
MCP6002-E/MC Overview
There is a 8-VFDFN Exposed Pad case package that contains the instrumentation amplifiers. The instrumentation amplifier in this picture is of the General Purpose-type. Upon delivery, op amp ic is packaged in a Tube case. We are approaching the 8h termination of the year. In total, there are 8 pins on this op amp ic. This linear amplifier should be powered by an 5V battery. 8 pins are located on the operational amplifiers. The input offset voltage is 4.5mV. This electrical part should be mounted using type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . The buffer amplifier is capable of operating from a supply current of 100 uA . It is recommended to keep the voltage gain at 112dB at all times. This op amp contains 2 circuits. On the buffer amps, there are 2 Channel channels that can be used. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. The total number of elements in this buffer amplifier is 2. The operating supply voltage of the buffer op amp is rated at 5.5V. It is recommended that you use an 100µA power supply with this electrical part in order for it to operate correctly. Instrumentation amplifiers are numbered by their -- series. This op amp ic is capable of conducting at least 25110 voltage gains. There are 8 terminals for wires on this op amp ic.
MCP6002-E/MC Features
8 Pins
supply voltage of 5V
112dB voltage gain
Output Type: Rail-to-Rail
8Terminations
MCP6002-E/MC Applications
There are a lot of Microchip Technology
MCP6002-E/MC Instrumentational OP Amps applications.
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















