MAX4253EBC+T
- Mfr.Part #
- MAX4253EBC+T
- Manufacturer
- Analog Devices, Inc.
- Package / Case
- 10-WFBGA, CSPBGA
- Datasheet
- Download
- Description
- IC OPAMP GP 2 CIRCUIT 12UCSP
- Stock
- 2,256
- In Stock :
- 2,256
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Analog Devices, Inc.
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Slew Rate :
- 0.3 V/µs
- Number of Amplifiers :
- 2
- Package / Case :
- 10-WFBGA, CSPBGA
- Nominal Supply Current :
- 400 µA
- Output Current :
- 68 mA
- Amplifier Type :
- GENERAL PURPOSE
- Series :
- -
- Supplier Device Package :
- 12-UCSP (1.54x2.02)
- Package :
- Tape and Reel (TR)
- Minimum Operating Temperature :
- - 40 C
- Max Supply Voltage :
- 5.5 V
- Shutdown :
- Shutdown
- Operating Supply Voltage :
- 2.75 V
- Base Product Number :
- MAX4253
- Input Bias Current :
- 1 pA
- Output Current per Channel :
- 68 mA
- Max Operating Temperature :
- 85 °C
- Number of Circuits :
- 2
- Gain Bandwidth Product :
- 3 MHz
- Operating Temperature :
- -40°C ~ 85°C
- Product Status :
- Obsolete
- Common Mode Rejection Ratio :
- 70 dB
- Current - Input Bias :
- 0.1 pA
- Max Junction Temperature (Tj) :
- 150 °C
- Voltage - Input Offset :
- 70 µV
- Response Time :
- 6.7 µs
- RoHS :
- Compliant
- Min Dual Supply Voltage :
- 1.2 V
- Input Offset Voltage (Vos) :
- 70 µV
- Radiation Hardening :
- No
- Maximum Operating Temperature :
- + 85 C
- Min Operating Temperature :
- -40 °C
- Current - Supply :
- 420µA (x2 Channels)
- Product :
- Operational Amplifiers
- Operating Supply Current :
- 420 µA
- Height :
- 690 µm
- Voltage Gain :
- 10 dB
- Mount :
- Surface Mount
- Number of Pins :
- 10
- Output Type :
- Push-Pull, Rail-to-Rail
- Max Dual Supply Voltage :
- 2.75 V
- Current - Output / Channel :
- 68 mA
- Min Supply Voltage :
- 2.4 V
- Mounting Style :
- SMD/SMT
- Manufacturer Lifecycle Status :
- Production (Last Updated: 1 month ago)
- Number of Channels :
- 2
- Product Type :
- Op Amps - Operational Amplifiers
- Subcategory :
- Amplifier ICs
- Mounting Type :
- Surface Mount
- Lifecycle Status :
- Production (Last Updated: 1 month ago)
- Datasheets
- MAX4253EBC+T

2 Channels 68 mA per Channel 0.1 pA 70 dB Instrumentational OP Amps 2.75 V 10-WFBGA, CSPBGA
MAX4253EBC-T Overview
In the package, you will find a 10-WFBGA, CSPBGA-case to contain the op amp ic. The instrumentation amplifier in this picture is of the General Purpose-type. This particular linear amplifier is a type of Amplifier ICs device, to be precise. The op amp ic has an array of 10 pins on it. Op amp rates 70 µV as input offset voltage. For this electrical component, Surface Mount is the recommended mounting type. According to the manufacturer, this buffer op amp works well at -40°C ~ 85°C , which is a good operating temperature. Using an 420 µA supply current, this operational amplifier ics can be operated. You should keep the voltage gain at 10 dB for the time being. A instrumentation amplifier like this has 2 circuits. On the buffer amps, there are 2 channels that can be used. Buffer amplifier produces Push-Pull, Rail-to-Rail signals, which is one of its many benefits. To operate this buffer amplifier, the temperature must not be lower than -40 °C. A temperature greater than 85 °C should not be used for the operation of buffer amplifier. The operating supply voltage of the buffer op amp is rated at 2.75 V. There is a recommendation that this electrical part be used with a supply with 420µA (x2 Channels) current rating. This electric component can work from a voltage of under 5.5 V as far as supply voltage is concerned. A voltage of 2.4 V or higher is recommended for the linear amplifier's supply voltage. This electrical part should be conducted under the dual supply voltage of 2.75 V volts when you conduct this part. In this case, - represents the instrumentation amplifiers' series number. The buffer amplifier consists of 2 amplifiers.
MAX4253EBC-T Features
10 dB voltage gain
Output Type: Push-Pull, Rail-to-Rail
MAX4253EBC-T Applications
There are a lot of Analog Devices
MAX4253EBC-T Instrumentational OP Amps applications.
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
- Video computer boards
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















