MAX412ESA+T
- Mfr.Part #
- MAX412ESA+T
- Manufacturer
- Analog Devices, Inc.
- Package / Case
- 8-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 2 CIRCUIT 8SOIC
- Stock
- 1
- In Stock :
- 1
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Analog Devices, Inc.
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Current - Input Bias :
- 80 nA
- Number of Circuits :
- 2
- Maximum Operating Temperature :
- + 85 C
- Nominal Supply Current :
- 5.4 mA
- Max Power Dissipation :
- 471 mW
- Package / Case :
- 8-SOIC (0.154, 3.90mm Width)
- Minimum Operating Temperature :
- - 40 C
- Current - Output / Channel :
- 35 mA
- Number of Pins :
- 8
- Supply Type :
- Dual, Single
- Product Type :
- Precision Amplifiers
- Number of Channels :
- 2
- Slew Rate :
- 4.5V/µs
- Gain Bandwidth Product :
- 28 MHz
- Lifecycle Status :
- Production (Last Updated: 1 month ago)
- Amplifier Type :
- GENERAL PURPOSE
- Shutdown :
- No Shutdown
- Mount :
- Surface Mount
- Base Product Number :
- MAX412
- Max Supply Voltage :
- 10.5 V
- Max Dual Supply Voltage :
- 5.25 V
- Operating Supply Voltage :
- 9 V
- Radiation Hardening :
- No
- Operating Temperature :
- -40°C ~ 85°C
- Common Mode Rejection Ratio :
- 115 dB
- Input Offset Voltage (Vos) :
- 120 µV
- Voltage Gain dB :
- 122 dB
- Current - Supply :
- 2.5mA (x2 Channels)
- Package :
- Bulk
- Dual Supply Voltage :
- 5 V
- Min Operating Temperature :
- -40 °C
- Voltage Gain :
- 122 dB
- Product :
- Precision Amplifiers
- Operating Supply Current :
- 2.5 mA
- Manufacturer Package Identifier :
- S8+4
- Supplier Device Package :
- 8-SOIC
- Input Bias Current :
- 80 nA
- Series :
- *
- Min Supply Voltage :
- 4.8 V
- Manufacturer Lifecycle Status :
- Production (Last Updated: 1 month ago)
- RoHS :
- Compliant
- Voltage - Input Offset :
- 120 µV
- Output Current per Channel :
- 35 mA
- Power Supply Rejection Ratio (PSRR) :
- 96 dB
- Min Dual Supply Voltage :
- 2.4 V
- Number of Amplifiers :
- 2
- Subcategory :
- Amplifier ICs
- Max Operating Temperature :
- 85 °C
- Mounting Style :
- SMD/SMT
- Mounting Type :
- Surface Mount
- Output Type :
- -
- Product Status :
- Active
- Datasheets
- MAX412ESA+T

2 Channels 35 mA per Channel 80 nA 115 dB Instrumentational OP Amps 9 V 8-SOIC (0.154, 3.90mm Width)
MAX412ESA-T Overview
It is packaged in an 8-SOIC (0.154, 3.90mm Width)-case that protects the operational amplifiers from damage. An op amp of this type is a General Purpose-type. A type of Amplifier ICs op amp ic can be identified by the fact that this is a type of Amplifier ICs device. In total, the buffer amplifier consists of 8 pins. Op amp ic rates 120 µV for input offset voltage. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C ~ 85°C. A supply current of 2.5 mA can be used to operate this linear amplifier. There should be no change in the voltage gain at 122 dB. This op amp ic has 2 circuits. There are a total of 2 channels available on the op amps. One of its many advantages is that buffer op amp outputs - signals. This instrumentation amplifier cannot operate below -40 °C degrees Celsius. You should only use op amp buffer at temperatures that are no higher than 85 °C. The operating supply voltage of the buffer op amp is rated at 9 V. For optimal performance, this electrical part should be connected to a supply with a current of 2.5mA (x2 Channels). It is important to keep in mind that the power supply voltage of this electric component is below 10.5 V, which is suitable. Keeping the linear amplifier's supply voltage above 4.8 V is recommended. In order to conduct this part, you will need to provide dual supply voltages of 5.25 V volts. Buffer op amp series numbers are indicated by the *. The linear amplifier has 2 amplifiers.
MAX412ESA-T Features
122 dB voltage gain
Output Type: -
MAX412ESA-T Applications
There are a lot of Analog Devices
MAX412ESA-T Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















