LTC1992-10CMS8#PBF
- Mfr.Part #
- LTC1992-10CMS8#PBF
- Manufacturer
- Analog Devices, Inc.
- Package / Case
- 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
- Datasheet
- Download
- Description
- IC OPAMP DIFF 1 CIRCUIT 8MSOP
- Stock
- 75
- In Stock :
- 75
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Analog Devices, Inc.
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Mounting Type :
- Surface Mount
- Schedule B :
- 8542330000, 8542330000/8542330000, 8542330000/8542330000/8542330000, 8542330000/8542330000/8542330000/8542330000
- Lifecycle Status :
- Production (Last Updated: 1 month ago)
- Operating Supply Current :
- 700 µA
- Max Supply Voltage :
- 12 V
- Input Offset Voltage :
- 2.5(mV)
- Input Bias Current :
- 2 pA
- Voltage Gain :
- 80 dB
- Min Supply Voltage :
- 2.4 V
- Width :
- 3 mm
- Number of Channels :
- 1
- Slew Rate :
- 0.75 V/µs
- Max Dual Supply Voltage :
- 5.5 V
- Operating Temperature :
- 0°C ~ 70°C
- Terminal Form :
- Gull wing
- Manufacturer :
- Analog Devices Inc
- Dual Supply Voltage (Max) :
- ±5.5(V)
- Operating Temperature Classification :
- COMMERCIAL
- Technology :
- CMOS
- Output Current per Channel :
- 30 mA
- JESD-30 Code :
- S-PDSO-G8
- Power Supply Rejection Ratio (PSRR) :
- 75 dB
- Qualification Status :
- Not Qualified
- Package Shape :
- Square
- Min Operating Temperature :
- 0 °C
- Rail/Rail I/O Type :
- Rail to Rail Output
- Unity Gain BW-Nom :
- 4000 kHz
- Surface Mount :
- yes
- Terminal Pitch :
- 0.65 mm
- Dual Supply Voltage (Min) :
- ±1.35(V)
- Number of Elements :
- 1
- Package Type :
- MSOP
- Number of Pins :
- 8
- Current - Supply :
- 700µA
- Current - Output / Channel :
- 30 mA
- Nominal Gain Bandwidth Product :
- 4 MHz
- Input Offset Voltage-Max :
- 2500 µV
- Single Supply Voltage (Typ) :
- 3/5/9(V)
- Reach Compliance Code :
- Compliant
- Current - Input Bias :
- 2 pA
- Resistance :
- 18.8 kΩ
- Temperature Grade :
- COMMERCIAL
- Common Mode Rejection Ratio :
- 55(dB)
- Peak Reflow Temperature (Cel) :
- 260
- Voltage Gain dB :
- 80(dB)
- Pbfree Code :
- No
- RoHS :
- Compliant
- Supplier Device Package :
- 8-MSOP
- Mounting :
- Surface Mount
- Terminal Position :
- Dual
- Number of Functions :
- 1
- Product Status :
- Active
- Rad Hardened :
- No
- Unity Gain Bandwidth Product (Typ) :
- 4(MHz)
- Single Supply Voltage (Min) :
- 2.7(V)
- Base Product Number :
- LTC1992
- Package :
- Tube
- Subcategory :
- Operational Amplifier
- Time@Peak Reflow Temperature-Max (s) :
- 30
- Supply Voltage Limit-Max :
- 12 V
- Single Supply Voltage (Max) :
- 11(V)
- Voltage - Input Offset :
- 250 µV
- JESD-609 Code :
- e3
- Number of Terminals :
- 8
- Pin Count :
- 8
- Dual Supply Voltage (Typ) :
- ±3/±5(V)
- Power Supply Rejection Ratio :
- 75(dB)
- Length :
- 3 mm
- Average Bias Current-Max (IIB) :
- 0.00025 µA
- Package / Case :
- 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
- Brand Name :
- Analog Devices Inc
- Input Offset Voltage (Vos) :
- 250 µV
- Seated Height-Max :
- 1.1 mm
- Gain Bandwidth Product :
- 3.2 MHz
- Number of Circuits :
- 1
- Lead Free :
- Lead Free
- Min Dual Supply Voltage :
- 1.35 V
- Operating Temp Range :
- 0C to 70C
- Packaging :
- Rail/Tube
- Output Type :
- Differential, Rail-to-Rail
- Series :
- -
- Manufacturer Lifecycle Status :
- Production (Last Updated: 1 month ago)
- Radiation Hardening :
- No
- Amplifier Type :
- Differential
- Power Supply Requirement :
- Single/Dual
- Max Operating Temperature :
- 70 °C
- Terminal Finish :
- MATTE TIN
- Datasheets
- LTC1992-10CMS8#PBF

1 Channels 30 mA per Channel 2 pA 55(dB) Instrumentational OP Amps 0.00025 µA 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
LTC1992-10CMS8#PBF Overview
In the package, you will find a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)-case to contain the op amp ic. The instrumentation amplifier in this picture is of the Differential-type. A Rail/Tube case is used for delivering the op amp. A total of 8 pins are located on this board. This particular linear amplifier is a type of Operational Amplifier device, to be precise. The op amp ic has an array of 8 pins on it. Op amp rates 250 µV as input offset voltage. For this electrical component, Surface Mount is the recommended mounting type. According to the manufacturer, this buffer op amp works well at 0°C ~ 70°C , which is a good operating temperature. Using an 700 µA supply current, this operational amplifier ics can be operated. You should keep the voltage gain at 80 dB for the time being. A instrumentation amplifier like this has 1 circuits. On the buffer amps, there are 1 channels that can be used. Buffer amplifier produces Differential, Rail-to-Rail signals, which is one of its many benefits. To operate this buffer amplifier, the temperature must not be lower than 0 °C. A temperature greater than 70 °C should not be used for the operation of buffer amplifier. 1 elements make up the design of this buffer amplifier. There is a recommendation that this electrical part be used with a supply with 700µA current rating. This electric component can work from a voltage of under 12 V as far as supply voltage is concerned. A voltage of 2.4 V or higher is recommended for the linear amplifier's supply voltage. This electrical part should be conducted under the dual supply voltage of 5.5 V volts when you conduct this part. In this case, - represents the instrumentation amplifiers' series number. During testing, the instrumentation amplifier resistance should remain within a range of 18.8 kΩ. 8 wire terminals are provided on this op amp.
LTC1992-10CMS8#PBF Features
8 Pins
80 dB voltage gain
Output Type: Differential, Rail-to-Rail
Resistance of 18.8 kΩ
8Terminations
LTC1992-10CMS8#PBF Applications
There are a lot of Analog Devices
LTC1992-10CMS8#PBF Instrumentational OP Amps applications.
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
- Video computer boards
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















