LT1999HS8-50#PBF
- Mfr.Part #
- LT1999HS8-50#PBF
- Manufacturer
- Analog Devices, Inc.
- Package / Case
- SOIC-8
- Datasheet
- Download
- Description
- IC CURRENT SENSE 1 CIRCUIT 8SO
- Stock
- 7,449
- In Stock :
- 7,449
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Analog Devices, Inc.
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Maximum Operating Temperature :
- + 125 C
- Manufacturer :
- Analog Devices Inc.
- Bandwidth :
- 1.2 MHz
- Terminal Pitch :
- 1.27 mm
- Supply Voltage Limit-Max :
- 6 V
- Brand Name :
- Linear Technology
- Length :
- 4.9 mm
- Product Status :
- Active
- Series :
- LT1999
- Input Bias Current :
- 137.5 µA
- Operating Temperature :
- -40°C ~ 125°C
- Surface Mount :
- yes
- Number of Channels :
- 1
- Slew Rate :
- 3 V/µs
- JESD-30 Code :
- R-PDSO-G8
- Current - Supply :
- 5.8mA
- Minimum Operating Temperature :
- - 40 C
- -3db Bandwidth :
- 1.2 MHz
- Number of Amplifiers :
- 2
- HTS Code :
- 8542.33.00.01
- Terminal Form :
- Gull wing
- Base Product Number :
- LT1999
- Height :
- 1.75 mm
- Current - Input Bias :
- 137.5 µA
- Peak Reflow Temperature (Cel) :
- NOT SPECIFIED
- Lifecycle Status :
- Production (Last Updated: 1 month ago)
- Technology :
- Bipolar
- Input Offset Voltage (Vos) :
- 500 µV
- Package Shape :
- RECTANGULAR
- Pin Count :
- 8
- Min Operating Temperature :
- -40 °C
- Package / Case :
- SOIC-8
- Power Supplies :
- 5 V
- Nominal Gain Bandwidth Product :
- 2 MHz
- Number of Functions :
- 1
- Average Bias Current-Max (IIB) :
- 1500 µA
- Product Type :
- Current Sense Amplifiers
- Mounting Style :
- SMD/SMT
- Terminal Finish :
- Matte Tin (Sn)
- Supply Current-Max :
- 7.1 mA
- Number of Circuits :
- 1
- JESD-609 Code :
- e3
- Mounting Type :
- Surface Mount
- Manufacturer Lifecycle Status :
- Production (Last Updated: 1 month ago)
- Number of Terminals :
- 8
- Package :
- Tube
- Input Offset Voltage-Max :
- 1500 µV
- Voltage Gain :
- 34.02 dB
- Operating Supply Current :
- 5.8 mA
- Amplifier Type :
- Current Sense
- Brand :
- Analog Devices
- Width :
- 3.9 mm
- Qualification Status :
- Not Qualified
- Output Current per Channel :
- 40 mA
- Terminal Position :
- Dual
- Seated Height-Max :
- 1.752 mm
- Resistance :
- 20 mΩ
- REACH SVHC :
- No SVHC
- Operating Supply Voltage :
- 5 V
- Product Category :
- Current Sense Amplifiers
- Number of Elements :
- 2
- RoHS :
- Compliant
- Power Supply Rejection Ratio (PSRR) :
- 68 dB
- Subcategory :
- Amplifier ICs
- Min Supply Voltage :
- 4.5 V
- Max Operating Temperature :
- 125 °C
- Common Mode Rejection Ratio :
- 120 dB
- Voltage - Input Offset :
- 500 µV
- Supplier Device Package :
- 8-SO
- Number of Pins :
- 8
- Temperature Grade :
- Automotive
- Max Supply Voltage :
- 5.5 V
- Output Type :
- -
- Reach Compliance Code :
- Compliant
- ECCN Code :
- EAR99
- Packaging :
- Tube
- Datasheets
- LT1999HS8-50#PBF

1 Channels 40 mA per Channel 137.5 µA 120 dB Instrumentational OP Amps 1500 µA 5 V 8 Pins SOIC-8
LT1999HS8-50#PBF Overview
It is packaged in an SOIC-8-case that protects the operational amplifiers from damage. An op amp of this type is a Current Sense-type. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. A total of 8 pins are attached to buffer op amp. A type of Amplifier ICs op amp ic can be identified by the fact that this is a type of Amplifier ICs device. In total, the buffer amplifier consists of 8 pins. Op amp ic rates 500 µV for input offset voltage. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C ~ 125°C. A supply current of 5.8 mA can be used to operate this linear amplifier. There should be no change in the voltage gain at 34.02 dB. This op amp ic has 1 circuits. There are a total of 1 channels available on the op amps. One of its many advantages is that buffer op amp outputs - signals. This instrumentation amplifier cannot operate below -40 °C degrees Celsius. You should only use op amp buffer at temperatures that are no higher than 125 °C. There are 2 elements in this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 5 V. For optimal performance, this electrical part should be connected to a supply with a current of 5.8mA. It is important to keep in mind that the power supply voltage of this electric component is below 5.5 V, which is suitable. Keeping the linear amplifier's supply voltage above 4.5 V is recommended. Buffer op amp series numbers are indicated by the LT1999. It is important that the op amp resistance stays within the range of 20 MΩ. The linear amplifier has 2 amplifiers. There are 8 wire terminals on this op amp ic.
LT1999HS8-50#PBF Features
8 Pins
34.02 dB voltage gain
Output Type: -
Resistance of 20 MΩ
8Terminations
LT1999HS8-50#PBF Applications
There are a lot of Analog Devices
LT1999HS8-50#PBF Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















