LT1792IN8#PBF
Or copy the link below:
- Mfr.Part #
- LT1792IN8#PBF
- Manufacturer
- Analog Devices, Inc.
- Package / Case
- 8-DIP (0.300, 7.62mm)
- Datasheet
- Download
- Description
- IC OPAMP JFET 1 CIRCUIT 8DIP
- Stock
- 24,145
- In Stock ：
- 24,145
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Analog Devices, Inc.
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Package Shape :
- RECTANGULAR
- Output Current per Channel :
- 27 mA
- Average Bias Current-Max (IIB) :
- 0.004 µA
- Temperature Grade :
- Industrial
- Supply Voltage Limit-Max :
- 20 V
- Series :
- -
- Mounting Style :
- Through Hole
- Current - Supply :
- 4.2mA
- Package / Case :
- 8-DIP (0.300, 7.62mm)
- Number of Terminals :
- 8
- Voltage Gain :
- 133.06 dB
- Brand :
- ITT Cannon
- Operating Temperature :
- -40°C ~ 85°C
- Brand Name :
- Analog Devices Inc
- Supplier Device Package :
- 8-PDIP
- Number of Circuits :
- 1
- Max Operating Temperature :
- 85 °C
- JESD-30 Code :
- R-PDIP-T8
- Unity Gain BW-Nom :
- 4300 kHz
- JESD-609 Code :
- e3
- Number of Pins :
- 8
- Min Operating Temperature :
- -40 °C
- Slew Rate :
- 3.4 V/µs
- Subcategory :
- Circular Connectors
- Min Dual Supply Voltage :
- 5 V
- Max Supply Voltage :
- 40 V
- Product Category :
- Circular MIL Spec Connector
- Number of Elements :
- 1
- Voltage - Input Offset :
- 200 µV
- Reach Compliance Code :
- Compliant
- Nominal Gain Bandwidth Product :
- 5.6 MHz
- Lead Free :
- Lead Free
- Terminal Position :
- Dual
- Time@Peak Reflow Temperature-Max (s) :
- NOT SPECIFIED
- Lifecycle Status :
- Production (Last Updated: 1 month ago)
- Common Mode Rejection Ratio :
- 82 dB
- Packaging :
- Tube
- Mounting Type :
- Through Hole
- Product Type :
- Circular MIL Spec Connector
- Terminal Finish :
- MATTE TIN
- Manufacturer Lifecycle Status :
- Production (Last Updated: 1 month ago)
- Width :
- 7.62 mm
- Neg Supply Voltage-Nom (Vsup) :
- -15 V
- Peak Reflow Temperature (Cel) :
- NOT SPECIFIED
- Min Supply Voltage :
- 10 V
- Power Supply Rejection Ratio (PSRR) :
- 83 dB
- Output Type :
- -
- Terminal Form :
- THROUGH-HOLE
- Gain Bandwidth Product :
- 5.6 MHz
- Package :
- Tube
- Pin Count :
- 8
- Input Offset Voltage-Max :
- 3700 µV
- Seated Height-Max :
- 3.937 mm
- Base Product Number :
- LT1792
- Max Dual Supply Voltage :
- 20 V
- Product Status :
- Active
- Pbfree Code :
- No
- Input Bias Current :
- 300 pA
- Current - Input Bias :
- 300 pA
- Operating Supply Current :
- 4.2 mA
- Number of Channels :
- 1
- Surface Mount :
- No
- Amplifier Type :
- J-FET
- Input Offset Voltage (Vos) :
- 600 µV
- Number of Functions :
- 1
- RoHS :
- Details
- Terminal Pitch :
- 2.54 mm
- Qualification Status :
- Not Qualified
- Manufacturer :
- ITT Cannon
- Datasheets
- LT1792IN8#PBF
1 Channels 27 mA per Channel 300 pA 82 dB Instrumentational OP Amps 0.004 µA 8 Pins 8-DIP (0.300, 7.62mm)
LT1792IN8#PBF Overview
There is a 8-DIP (0.300, 7.62mm) case package that contains the instrumentation amplifiers. The instrumentation amplifier in this picture is of the J-FET-type. Upon delivery, op amp ic is packaged in a Tube case. In total, there are 8 pins on this op amp ic. There are two types of Circular Connectors op amps in this case, and this device falls into one of them. 8 pins are located on the operational amplifiers. The input offset voltage is 600 µV. This electrical part should be mounted using type Through Hole. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C ~ 85°C . The buffer amplifier is capable of operating from a supply current of 4.2 mA . It is recommended to keep the voltage gain at 133.06 dB at all times. This op amp contains 1 circuits. On the buffer amps, there are 1 channels that can be used. One of the many benefits of this op amp ic is that it emits - signals. For this linear amplifier to work, the temperature should not be below -40 °C. In order to avoid damage to the product, operational amplifiers should only be used at temperatures below 85 °C. The total number of elements in this buffer amplifier is 1. It is recommended that you use an 4.2mA power supply with this electrical part in order for it to operate correctly. Under 40 V is the minimum supply voltage for this electric component. Over 10 V is a recommended supply voltage for buffer ampsIn order for this electronic part to be conducted successfully, you should use a dual supply voltage of 20 V. Instrumentation amplifiers are numbered by their - series. There are 8 terminals for wires on this op amp ic.
LT1792IN8#PBF Features
8 Pins
133.06 dB voltage gain
Output Type: -
8Terminations
LT1792IN8#PBF Applications
There are a lot of Analog Devices
LT1792IN8#PBF Instrumentational OP Amps applications.
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
Manufacturer related products
Catalog related products
Related products
- Follow Us
-
- Payment
-
- Subscribe
- Certification
-
-
