IXDS502D1B
Or copy the link below:
- Mfr.Part #
- IXDS502D1B
- Manufacturer
- Littelfuse
- Package / Case
- 6-VDFN Exposed Pad
- Datasheet
- Download
- Description
- IC PWR DRIVER 1:1 6DFN
- Stock
- 25,979
- In Stock ：
- 25,979
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Littelfuse
- Product Category :
- Power Distribution Switches, Load Drivers
- Supplier Device Package :
- 6-DFN (4x5)
- Temperature Grade :
- Military
- Series :
- --
- Output Type :
- --
- Width :
- 2mm
- Max Operating Temperature :
- 125 °C
- Output Current per Channel :
- 500mA
- Number of Terminations :
- 6
- Output Configuration :
- Low Side
- Package :
- Bulk
- Nominal Supply Current :
- 2mA
- Switch Type :
- GENERAL PURPOSE
- Number of Outputs :
- 1
- Min Supply Voltage :
- 4.5 V
- Mount :
- Surface Mount
- Input Type :
- Non-Inverting
- Supply Voltage-Min (Vsup) :
- 4.5V
- Operating Temperature :
- -55°C~125°C TA
- JESD-30 Code :
- S-XDSO-N6
- Fault Protection :
- --
- Voltage - Supply (Vcc/Vdd) :
- Not Required
- Number of Functions :
- 1
- Base Product Number :
- IXDS502
- Supply Voltage-Max (Vsup) :
- 25V
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Mounting Type :
- Surface Mount
- Manufacturer :
- IXYS Corporation
- Published :
- 2007
- Base Part Number :
- IXD*502
- Reach Compliance Code :
- Compliant
- Supply Voltage :
- 15V
- RoHS :
- Compliant
- Time@Peak Reflow Temperature-Max (s) :
- NOT SPECIFIED
- Fall Time (Typ) :
- 10 ns
- Max Output Current :
- 2A
- Resistance :
- 4Ohm
- Package / Case :
- 6-VDFN Exposed Pad
- Rise Time :
- 12ns
- Turn Off Time :
- 0.035 µs
- Packaging :
- Bulk
- Ratio - Input:Output :
- 1:1
- High Side Driver :
- No
- Terminal Position :
- Dual
- Peak Reflow Temperature (Cel) :
- NOT SPECIFIED
- ECCN Code :
- EAR99
- Terminal Pitch :
- 0.5mm
- Qualification Status :
- Not Qualified
- Number of Terminals :
- 6
- Turn On Time :
- 0.04 µs
- Terminal Form :
- NO LEAD
- Interface :
- On/Off
- HTS Code :
- 8542.39.00.01
- Features :
- --
- Length :
- 2mm
- Number of Drivers :
- 1
- Number of Pins :
- 6
- Rds On (Typ) :
- 3 Ω
- Package Shape :
- Square
- Seated Height-Max :
- 1 mm
- Pin Count :
- 6
- Voltage - Load :
- 4.5V~25V
- Min Operating Temperature :
- -55 °C
- Surface Mount :
- yes
- Product Status :
- Obsolete
- Interface IC Type :
- BUFFER OR INVERTER BASED MOSFET DRIVER
- RoHS Status :
- RoHS Compliant
- Output Peak Current Limit-Nom :
- 2A
- Current - Output (Max) :
- 500mA
- Datasheets
- IXDS502D1B
IXDS502D1B Documents
-- 0.5mm PMIC -- Series IXD*502 6 Pin 15V 6-VDFN Exposed Pad
IXDS502D1B Overview
The LED driver's packaged as a Bulk.The 6-VDFN Exposed Pad package contains it.Surface Mount is the mounting type of the LED driver.The switch type is General Purpose.To ensure reliable operation, the temperature should be set to -55°C~125°C TA.There is a default setting of 1 for output.To operate, it needs a supply voltage of Not Required.The maximum output voltage is -- volts.This object belongs to the IXD*502 family.It contains 6 terminations.For operation, 6 pins are used.The LED driver has 1 functions.Its maximum output voltage is 500mAV.The maximum output current drops to 2A in order to meet the operation criteria.A supply voltage of 15V leads to high efficiency.The lighting driver is mounted in the way of Surface Mount.There are 6 pins in total on this board.There is 4Ohm resistance on the LED driver.This electrical component is included in the -- series.The maximum supply voltage is set to 25V.In order for the lighting driver to operate normally, the supply voltage (Vsup) should be maintained above 4.5V.It is recommended that the maximum operating temperature be 125 °C°C to ensure stable operation.Ensure reliability by operating at a minimum temperature of -55 °C degrees Celsius.A supply voltage of 4.5 VV is sufficient for it to work.The interface to the LED driver is of type BUFFER OR INVERTER BASED MOSFET DRIVER.There are 1 drivers associated with the part.
IXDS502D1B Features
Supplied from 15V
Resistance of 4Ohm
IXDS502D1B Applications
There are a lot of IXYS
IXDS502D1B Power Switches ICs applications.
- Portable GPS Device
- Set-top-box
- USB Power Distribution
- Notebook PC
- Telecom and Network Systems
- PC Card Hot Swap
- Storage Drives
- Portable/Handheld Devices
- Wireless/Networking Cards
- Low Voltage I/O System Power
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
Manufacturer related products
Catalog related products
Related products
| Part | Manufacturer | Stock | Description |
|---|---|---|---|
| IXDS430SI | Littelfuse | 8,016 | IC GATE DRVR LOW-SIDE 28SOIC |
- Follow Us
-
- Payment
-
- Subscribe
- Certification
-
-
