ICL7642ECPD
- Mfr.Part #
- ICL7642ECPD
- Manufacturer
- Analog Devices, Inc.
- Package / Case
- Axial
- Datasheet
- Download
- Description
- IC CMOS 4 CIRCUIT 14DIP
- Stock
- 3,678
- In Stock :
- 3,678
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Analog Devices, Inc.
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Product :
- Operational Amplifiers
- Min Supply Voltage :
- 2 V
- Minimum Operating Temperature :
- 0 C
- Operating Supply Current :
- 10 µA
- Subcategory :
- Amplifier ICs
- Temperature Coefficient :
- ±100ppm/°C
- Min Dual Supply Voltage :
- 1 V
- Mounting Type :
- Through Hole
- Operating Supply Voltage :
- 8 V
- Min Operating Temperature :
- 0 °C
- Size / Dimension :
- 0.094 Dia x 0.250 L (2.39mm x 6.35mm)
- Number of Channels :
- 4
- Number of Circuits :
- 4
- Packaging :
- Tape and Reel (TR)
- Series :
- Military, MIL-PRF-55182/01, RNC55
- Lifecycle Status :
- Production (Last Updated: 1 year ago)
- Nominal Supply Current :
- 4 mA
- Supplier Device Package :
- Axial
- Output Type :
- Rail-to-Rail
- Package / Case :
- Axial
- Output Current per Channel :
- -
- Shutdown :
- No Shutdown
- Radiation Hardening :
- No
- Slew Rate :
- 0.016 V/µs
- Power (Watts) :
- 0.125W, 1/8W
- Base Product Number :
- ICL7642
- Mounting Style :
- Through Hole
- Voltage Gain :
- 90 dB
- Number of Pins :
- 14
- Mount :
- Through Hole
- Features :
- Military, Moisture Resistant, Weldable
- Package :
- Tube
- Gain Bandwidth Product :
- 44 kHz
- Height - Seated (Max) :
- --
- Voltage - Input Offset :
- 20 mV
- Manufacturer Lifecycle Status :
- PRODUCTION (Last Updated: 23 hours ago)
- Max Operating Temperature :
- 70 °C
- Operating Temperature :
- -65°C ~ 175°C
- Product Status :
- Active
- Maximum Operating Temperature :
- + 70 C
- Current - Supply :
- 1mA (x4 Channels)
- RoHS :
- Compliant
- Number of Amplifiers :
- 4
- Current - Input Bias :
- 1 pA
- Technology :
- CMOS
- Composition :
- Metal Film
- Product Type :
- Op Amps - Operational Amplifiers
- Amplifier Type :
- CMOS
- Lead Free :
- Lead Free
- Max Dual Supply Voltage :
- 8 V
- Input Offset Voltage (Vos) :
- 20 mV
- Input Bias Current :
- 1 pA
- Max Supply Voltage :
- 16 V
- Common Mode Rejection Ratio :
- 60 dB
- Number of Terminations :
- 2
- Tolerance :
- ±1%
- Resistance :
- 2.43 kOhms
- Failure Rate :
- P (0.1%)
- Datasheets
- ICL7642ECPD

4 Channels - per Channel 1 pA 60 dB Instrumentational OP Amps 8 V Axial
ICL7642ECPD+ Overview
There is a Axial case package that contains the instrumentation amplifiers. The instrumentation amplifier in this picture is of the CMOS-type. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. We are approaching the 2h termination of the year. There are two types of Amplifier ICs op amps in this case, and this device falls into one of them. 14 pins are located on the operational amplifiers. The input offset voltage is 20 mV. This electrical part should be mounted using type Through Hole. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -65°C ~ 175°C . The buffer amplifier is capable of operating from a supply current of 10 µA . It is recommended to keep the voltage gain at 90 dB at all times. This op amp contains 4 circuits. On the buffer amps, there are 4 channels that can be used. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. For this linear amplifier to work, the temperature should not be below 0 °C. In order to avoid damage to the product, operational amplifiers should only be used at temperatures below 70 °C. The operating supply voltage of the buffer op amp is rated at 8 V. It is recommended that you use an 1mA (x4 Channels) power supply with this electrical part in order for it to operate correctly. Under 16 V is the minimum supply voltage for this electric component. Over 2 V is a recommended supply voltage for buffer ampsIn order for this electronic part to be conducted successfully, you should use a dual supply voltage of 8 V. Instrumentation amplifiers are numbered by their Military, MIL-PRF-55182/01, RNC55 series. In order for the op amp resistance to remain within the 2.43 kOhms range, the op amp should be tested. On the linear amplifier, there are 4 amplifiers.
ICL7642ECPD+ Features
90 dB voltage gain
Output Type: Rail-to-Rail
Resistance of 2.43 kOhms
ICL7642ECPD+ Applications
There are a lot of Analog Devices
ICL7642ECPD+ Instrumentational OP Amps applications.
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















