CAT3644HV3
- Mfr.Part #
- CAT3644HV3
- Manufacturer
- onsemi
- Package / Case
- 16-WFQFN Exposed Pad
- Datasheet
- Download
- Description
- IC LED DRVR RGLTR SGL WR 16TQFN
- Stock
- 4,930
- In Stock :
- 4,930
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- onsemi
- Product Category :
- LED Drivers
- Reach Compliance Code :
- Unknown
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Operating Temperature :
- -40°C~85°C TA
- Qualification Status :
- COMMERCIAL
- Frequency :
- 800kHz~1.6MHz
- Terminal Form :
- NO LEAD
- Voltage - Supply (Max) :
- 5.5V
- JESD-609 Code :
- e3
- Width :
- 3mm
- Number of Terminations :
- 16
- Applications :
- Backlight
- Number of Functions :
- 1
- Multiplexed Display Capability :
- No
- Number of Outputs :
- 4
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Supply Voltage :
- 3.6V
- Terminal Pitch :
- 0.5mm
- Topology :
- Switched Capacitor (Charge Pump)
- Current - Output / Channel :
- 25mA
- Height Seated (Max) :
- 0.8mm
- Package / Case :
- 16-WFQFN Exposed Pad
- Internal Switch(s) :
- yes
- Data Input Mode :
- Serial
- Series :
- QUAD-Mode®
- JESD-30 Code :
- S-XQCC-N16
- Terminal Finish :
- MATTE TIN
- Length :
- 3mm
- Mounting Type :
- Surface Mount
- Pbfree Code :
- yes
- Number of Segments :
- 4
- Voltage - Output :
- 7V
- Pin Count :
- 16
- Voltage - Supply (Min) :
- 2.5V
- Packaging :
- Tape and Reel (TR)
- Surface Mount :
- yes
- Peak Reflow Temperature (Cel) :
- 260
- Interface IC Type :
- LED DISPLAY DRIVER
- RoHS Status :
- ROHS3 Compliant
- Datasheets
- CAT3644HV3
0.5mm PMIC QUAD-Mode® Series 800kHz~1.6MHz 3.6V 16-WFQFN Exposed Pad
CAT3644HV3-T2 Overview
There is also a 16-WFQFN Exposed Pad package that is used to save space on the board. Using this LED driver, there are 4 outputs.As far as mounting is concerned, Surface Mount is adopted.If the led driver ic is set to -40°C~85°C TA, it will work normally.Backlight has many advantages.It operates on the basis of the frequency of 800kHz~1.6MHz.It operates with terminations of 16.If the voltage supply is below 2.5V, undetermined failures may occur.It is estimated that there are 4 segments.It produces a voltage of 7V volts.In addition, it is equipped with a total of 16 pins.An optimized supply voltage of 5.5V is provided.A component of the QUAD-Mode® series, this LED driver is widely used in a variety of applications.The interface IC for this part is marked with the LED DISPLAY DRIVER.
CAT3644HV3-T2 Features
Available in the 16-WFQFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 800kHz~1.6MHz
Supply voltage of 3.6V
CAT3644HV3-T2 Applications
There are a lot of Rochester Electronics, LLC
CAT3644HV3-T2 LED Driver ICs applications.
- Museum lighting
- High-end retail lighting
- Medical surgery lighting
- Replacement lamps
- Panel lighting
- Down lights
- Linear fluorescent
- A- lamps
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Industrial LED Lighting: Image Recognition Devices
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















