AD621ANZ
Or copy the link below:
- Mfr.Part #
- AD621ANZ
- Manufacturer
- Analog Devices, Inc.
- Package / Case
- 8-DIP (0.300, 7.62mm)
- Datasheet
- Download
- Description
- IC INST AMP 1 CIRCUIT 8DIP
- Stock
- 17,898
- In Stock ：
- 17,898
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Analog Devices, Inc.
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Number of Elements :
- 3
- Current - Supply :
- 900μA
- Current - Input Bias :
- 500pA
- Mount :
- Through Hole
- Input Offset Voltage (Vos) :
- 35μV
- RoHS Status :
- ROHS3 Compliant
- Radiation Hardening :
- No
- REACH SVHC :
- No SVHC
- Output Current per Channel :
- 18mA
- Bandwidth :
- 800 kHz
- Base Part Number :
- AD621
- Max Supply Voltage :
- 18V
- Max Power Dissipation :
- 650mW
- Lead Free :
- Contains Lead
- Slew Rate :
- 1.2V/µs
- -3db Bandwidth :
- 800kHz
- Supplier Device Package :
- 8-PDIP
- Voltage - Supply, Single/Dual (±) :
- ±2.3V~18V
- Common Mode Rejection Ratio :
- 93 dB
- Max Dual Supply Voltage :
- 18V
- Mounting Type :
- Through Hole
- Number of Pins :
- 8
- Amplifier Type :
- Instrumentation
- Power Supply Rejection Ratio (PSRR) :
- 95dB
- Number of Amplifiers :
- 1
- Length :
- 9.91mm
- Width :
- 6.35mm
- Min Supply Voltage :
- 4.6V
- Nominal Supply Current :
- 900μA
- Operating Supply Current :
- 1.3mA
- Input Voltage Noise Density :
- 13nV/sqrt Hz
- Factory Lead Time :
- 8 Weeks
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Height :
- 3.3mm
- Output Current :
- 18mA
- Min Operating Temperature :
- -55°C
- Operating Temperature :
- -40°C~85°C
- Number of Channels :
- 1
- Number of Circuits :
- 1
- Package / Case :
- 8-DIP (0.300, 7.62mm)
- Max Operating Temperature :
- 125°C
- Voltage - Input Offset :
- 75μV
- Lifecycle Status :
- Production (Last Updated: 3 weeks ago)
- Packaging :
- Tube
- Resistance :
- 10GOhm
- Min Dual Supply Voltage :
- 2.3V
- Power Dissipation :
- 650mW
- Current - Output / Channel :
- 18mA
- Datasheets
- AD621ANZ
1 Channels 18mA per Channel 500pA 93 dB Instrumentational OP Amps ±2.3V~18V AD621 8-DIP (0.300, 7.62mm)
AD621ANZ Overview
Packaging for the buffer amplifier is in the form of a 8-DIP (0.300, 7.62mm) case. A Instrumentation-type buffer amplifier is shown here. There is a Tube case that is delivered with the instrumentation amplifiers. An 8-pin op amp ic is included in the package. With regards to the offset voltage of the input, buffer amplifier is rated at 35μV. For this electrical component, the recommended mounting type is Through Hole, which is the most common. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. Using a supply current of 1.3mA , this buffer op amp will be able to operate. The buffer amp consists of 1 circuits in total. 1 channels are available on the instrumentation amplifier. This op amp needs to be operated at a temperature of not less than -55°C degrees Celsius in order to function properly. You should not use op amp above 125°C degrees. A total of 3 elements are present in this linear amplifier. A supply of 900μA or higher is recommended for use with this electronic part. Regarding the voltage of the supply, this electrical part can work from a voltage as low as 18V, and this is an excellent feature. In order to ensure that the instrumentation amplifier's supply voltage remains above 4.6V, it is recommended to keep it higher. This electronic part should be conducted with a dual supply voltage of 18V volts for this part. It is recommended to keep the buffer amps resistance within the range of 10GOhm. As you can see, the linear amplifier has 1 amplifiers.
AD621ANZ Features
Resistance of 10GOhm
AD621ANZ Applications
There are a lot of Analog Devices Inc.
AD621ANZ Instrumentational OP Amps applications.
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
Manufacturer related products
Catalog related products
Related products
- Follow Us
-
- Payment
-
- Subscribe
- Certification
-
-
