7015L25J
Or copy the link below:
- Mfr.Part #
- 7015L25J
- Manufacturer
- Intersil (Renesas Electronics Corporation)
- Package / Case
- PLCC
- Datasheet
- Download
- Description
- IC SRAM 72KBIT PARALLEL 68PLCC
- Stock
- 16,391
- In Stock ：
- 16,391
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Intersil (Renesas Electronics Corporation)
- Product Category :
- Memory
- Factory Lead Time :
- 7 Weeks
- Mount :
- Surface Mount
- Max Operating Temperature :
- 70°C
- Width :
- 24mm
- Peak Reflow Temperature (Cel) :
- 225
- Min Operating Temperature :
- 0°C
- Thickness :
- 3.63mm
- Operating Temperature :
- 0°C ~ 70°C (TA)
- Voltage - Supply :
- 4.5 V ~ 5.5 V
- Density :
- 72 kb
- Word Size :
- 9b
- Memory Format :
- SRAM
- Access Time :
- 25 ns
- Supply Voltage :
- 5V
- Organization :
- 8KX9
- Address Bus Width :
- 26b
- Package / Case :
- PLCC
- Standby Current-Max :
- 0.005A
- Number of Terminations :
- 68
- Temperature Grade :
- COMMERCIAL
- Sync/Async :
- ASYNCHRONOUS
- Output Characteristics :
- 3-STATE
- Terminal Position :
- QUAD
- Base Part Number :
- IDT7015
- Series :
- --
- Number of Functions :
- 1
- Power Supplies :
- 5V
- I/O Type :
- COMMON
- Max Supply Voltage :
- 5.5V
- Length :
- 24mm
- Pin Count :
- 68
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Number of Ports :
- 2
- Packaging :
- Tape and Reel (TR)
- RoHS Status :
- RoHS Compliant
- Supplier Device Package :
- 68-PLCC (24.21x24.21)
- Memory Interface :
- Parallel
- Number of Pins :
- 68
- Radiation Hardening :
- No
- ECCN Code :
- EAR99
- Terminal Form :
- J BEND
- Lead Free :
- Contains Lead
- Operating Supply Voltage :
- 5V
- Published :
- 2010
- Additional Feature :
- INTERRUPT FLAG; SEMAPHORE; AUTOMATIC POWER-DOWN
- JESD-609 Code :
- e0
- Memory Size :
- 9kB
- Write Cycle Time - Word, Page :
- 25ns
- Mounting Type :
- Surface Mount
- Memory Type :
- RAM, SDR, SRAM
- Height Seated (Max) :
- 4.57mm
- Pbfree Code :
- No
- Terminal Finish :
- Tin/Lead (Sn85Pb15)
- Min Supply Voltage :
- 4.5V
- Nominal Supply Current :
- 220mA
- Interface :
- Parallel
- Datasheets
- 7015L25J
5V V Surface Mount -- 68 Pin Memory IC -- Series IDT7015 72 kb kb 24mm mm 220mA mA 9b b
7015L25J8 Overview
RAM, SDR, SRAM is the type of memory it has. There is a Tape & Reel (TR) case available. The PLCC case contains it. The chip has an 9kB memory. This device uses a SRAM-format memory, which is of mainstream design. A wide operating temperature range makes this device ideal for a variety of demanding applications. A voltage of 4.5 V ~ 5.5 V can be supplied to memory ics. Its recommended mounting type is Surface Mount. The chip has 68 terminations. For a comprehensive working procedure, this part supports as many as 1 functions. In order to operate this memory device, it must be supplied with 5V of power. Similar parts are frequently selected using IDT7015, the device's base part number. The memory device is enclosed in a package with an 68-pin connector. There are 68 pins on this memory device, which indicates it has 68 memory locations in it. A voltage of 5V is noted as the operating supply voltage for this memory. In this chip, Surface Mount mounting is used, a straightforward, high-efficiency mounting method. In terms of its nominal supply current, this memory component is rated at 220mA. Despite all its merits, this chip also features INTERRUPT FLAG; SEMAPHORE; AUTOMATIC POWER-DOWN to boost system performance. A memory address is accessed through 2 ports on this chip. When it comes to power supplies, this memory chip only requires 5V . I/O port addresses on this device are mapped to memory addresses of COMMON bits. In its target applications, this memory ics plays an important role as a member of the -- series of memory devices. This device must operate at a minimum temperature of 0°C. Temperatures no higher than 70°C degrees Celsius are recommended for operation. It is recommended that the minimum supply voltage for this part be no less than 4.5V. Ideally, this part should be supplied with a voltage of at least 5.5V.
7015L25J8 Features
Package / Case: PLCC
68 Pins
Operating Supply Voltage:5V
Additional Feature:INTERRUPT FLAG; SEMAPHORE; AUTOMATIC POWER-DOWN
I/O Type: COMMON
7015L25J8 Applications
There are a lot of Integrated Device Technology (IDT)
7015L25J8 Memory applications.
- cell phones
- eSRAM
- mainframes
- multimedia computers
- networking
- personal computers
- servers
- supercomputers
- telecommunications
- workstations,
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
Manufacturer related products
Catalog related products
Related products
- Follow Us
-
- Payment
-
- Subscribe
- Certification
-
-
