7005S35JI8
- Mfr.Part #
- 7005S35JI8
- Manufacturer
- Intersil (Renesas Electronics Corporation)
- Package / Case
- PLCC
- Datasheet
- Download
- Description
- IC SRAM 64KBIT PARALLEL 68PLCC
- Stock
- 19,455
- In Stock :
- 19,455
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Intersil (Renesas Electronics Corporation)
- Product Category :
- Memory
- JESD-609 Code :
- e0
- Terminal Form :
- J BEND
- RoHS Status :
- RoHS Compliant
- Package / Case :
- PLCC
- Min Supply Voltage :
- 4.5V
- Max Supply Voltage :
- 5.5V
- Operating Supply Voltage :
- 5V
- ECCN Code :
- EAR99
- Memory Size :
- 8kB
- Published :
- 2005
- Standby Current-Max :
- 0.03A
- Power Supplies :
- 5V
- Max Operating Temperature :
- 85°C
- Number of Ports :
- 2
- Operating Temperature :
- -40°C ~ 85°C (TA)
- Radiation Hardening :
- No
- Mounting Type :
- Surface Mount
- Supplier Device Package :
- 68-PLCC (24.21x24.21)
- Supply Current-Max :
- 0.3mA
- Address Bus Width :
- 26b
- Factory Lead Time :
- 7 Weeks
- Supply Voltage :
- 5V
- Pbfree Code :
- No
- Write Cycle Time - Word, Page :
- 35ns
- Terminal Finish :
- Tin/Lead (Sn85Pb15)
- Output Characteristics :
- 3-STATE
- Lead Free :
- Contains Lead
- Memory Interface :
- Parallel
- Organization :
- 8KX8
- Voltage - Supply :
- 4.5 V ~ 5.5 V
- Width :
- 24mm
- Terminal Position :
- QUAD
- Series :
- --
- Length :
- 24mm
- Interface :
- Parallel
- Peak Reflow Temperature (Cel) :
- 225
- Base Part Number :
- IDT7005
- Moisture Sensitivity Level (MSL) :
- 3 (168 Hours)
- Additional Feature :
- INTERRUPT FLAG; AUTOMATIC POWER-DOWN; SEMAPHORE
- Access Time :
- 35 ns
- Memory Format :
- SRAM
- Number of Terminations :
- 68
- Surface Mount :
- yes
- Number of Pins :
- 68
- Number of Functions :
- 1
- I/O Type :
- COMMON
- Min Operating Temperature :
- -40°C
- Memory Type :
- RAM, SDR, SRAM
- Temperature Grade :
- Industrial
- Packaging :
- Tape and Reel
- Density :
- 64 kb
- Thickness :
- 3.63mm
- Pin Count :
- 68
- Datasheets
- 7005S35JI8
5V V -- 68 Pin Memory IC -- Series IDT7005 64 kb kb 24mm mm
7005S35JI8 Overview
A RAM, SDR, SRAM-type memory can be classified as the memory type of this device. In addition, memory ics is available in a Tape & Reel case as well. Embedded in the PLCC case, memory ics is a single file. On the chip, there is an 8kB memory, which is the size of the chip's memory. There is a SRAM-format memory used in this device, which is the memory format used by mainstream devices. Featuring an extended operating temperature range of -40°C ~ 85°C (TA), this device allows it to be used in a variety of demanding applications. The device is capable of handling a supply voltage of 4.5 V ~ 5.5 V volts. The recommended mounting type for memory ics is Surface Mount. A total of 68 terminations have been planted on the chip. The comprehensive working procedure of this part involves 1 functions. In order to power this memory device, 5V will be necessary. Similar parts are frequently selected using the ic memory chip's base part number, IDT7005. A 68-pin package containing this memory device is used to house this device. The memory device in question has 68 pins, thus indicating that it has 68 memory locations that can be accessed. There is a note indicating that this memory chip operates at an 5V volt supply voltage. This chip features all the merits of a conventional chip, but it also features INTERRUPT FLAG; AUTOMATIC POWER-DOWN; SEMAPHORE to improve system performance. 2 ports allow read/write access to one memory address in this chip. As for power supplies, this memory chip requires just 5V . As part of the design, the I/O port addresses are mapped into the memory using an COMMON-bit number. It is an important component of the -- series memory devices used in a variety of applications. There must not be a minimum operating temperature of less than -40°C for this device. A temperature of no more than 85°C centigrade is recommended for the component to be operated, otherwise, damage might be inflicted on the component. In order to operate your device, you will need to provide a maximum supply current of 0.3mA. Ideally, this part should be supplied with a voltage of at least 4.5V. An operating voltage of no more than 5.5V is required.
7005S35JI8 Features
Package / Case: PLCC
68 Pins
Operating Supply Voltage:5V
Additional Feature:INTERRUPT FLAG; AUTOMATIC POWER-DOWN; SEMAPHORE
I/O Type: COMMON
7005S35JI8 Applications
There are a lot of Integrated Device Technology (IDT)
7005S35JI8 Memory applications.
- supercomputers
- telecommunications
- workstations,
- DVD disk buffer
- data buffer
- nonvolatile BIOS memory
- Camcorders
- embedded logic
- eDRAM
- graphics card
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















