TS912BID

Share

Or copy the link below:

Mfr.Part #
TS912BID
Manufacturer
STMicroelectronics
Package / Case
8-SOIC (0.154, 3.90mm Width)
Datasheet
Download
Description
IC CMOS 2 CIRCUIT 8SOIC
Stock
8,559
In Stock :
8,559

Request A Quote(RFQ)

* Fullname:
* Company:
* E-Mail:
  Phone:
  Comment:
* Quantity:
Manufacturer :
STMicroelectronics
Product Category :
Instrumentation, OP Amps, Buffer Amps
Voltage - Supply, Single/Dual (±) :
2.7V~16V ±1.35V~8V
Supply Voltage :
3V
Number of Terminations :
8
Terminal Form :
Gull wing
ECCN Code :
EAR99
Operating Supply Voltage :
8V
Common Mode Rejection Ratio :
60 dB
Voltage Gain :
92.04dB
RoHS Status :
ROHS3 Compliant
Architecture :
VOLTAGE-FEEDBACK
Low-Bias :
yes
Nominal Supply Current :
700µA
Height Seated (Max) :
1.75mm
Mount :
Surface Mount
Current - Input Bias :
1pA
Packaging :
Tube
Mounting Type :
Surface Mount
Package / Case :
8-SOIC (0.154, 3.90mm Width)
Base Part Number :
TS912
Peak Reflow Temperature (Cel) :
260
Low-Offset :
No
Slew Rate :
1.3V/µs
Number of Elements :
2
Length :
4.9mm
Gain Bandwidth Product :
1.4MHz
Output Type :
Rail-to-Rail
Power Supplies :
3/10V
Output Current :
40mA
Number of Pins :
8
Pin Count :
8
Terminal Finish :
Nickel/Palladium/Gold (Ni/Pd/Au)
Radiation Hardening :
No
Operating Supply Current :
400μA
Lead Free :
Lead Free
Moisture Sensitivity Level (MSL) :
1 (Unlimited)
Average Bias Current-Max (IIB) :
0.0003μA
Frequency Compensation :
yes
Number of Functions :
2
Operating Temperature :
-40°C~125°C
Micropower :
yes
Time@Peak Reflow Temperature-Max (s) :
30
Bias Current-Max (IIB) @25C :
0.00015μA
Input Offset Voltage (Vos) :
2mV
Unity Gain BW-Nom :
800 kHz
JESD-609 Code :
e4
Terminal Position :
Dual
Output Current per Channel :
75mA
Amplifier Type :
GENERAL PURPOSE
Datasheets
TS912BID
Introducing Instrumentation, OP Amps, Buffer Amps STMicroelectronics TS912BID from Chip IC,where excellence meets affordability. This product stands out with its Number of Terminations:8, Mounting Type:Surface Mount, Package / Case:8-SOIC (0.154, 3.90mm Width), Base Part Number:TS912, Number of Pins:8, Operating Temperature:-40°C~125°C, TS912BID pinout, TS912BID datasheet PDF, TS912BID amp .Beyond Instrumentation, OP Amps, Buffer Amps STMicroelectronics TS912BID ,we also offer OP07CDR, TS321CX5 RFG, NE5532ADR, Our vast inventory has you covered. Contact us now for immediate solutions.

STMicroelectronics TS912BID


75mA per Channel 1pA 60 dB Instrumentational OP Amps 0.0003μA 8V 2.7V~16V ±1.35V~8V TS912 8 Pins 8-SOIC (0.154, 3.90mm Width)

TS912BID Overview


In order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) case is used. There are two types of operational amplifiers in this circuit. In the case of Tube cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 8. It consists of a total of 8 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 3V battery. It has 8 pins that make up the linear amplifier. In terms of input offset voltage, operational amplifier rates 2mV. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. In order for this instrumentation amplifier to operate, the supply current needs to be between 400μA and 10 . Maintain 92.04dB as the voltage gain. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. As a whole, there are 2 elements that make up this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 8V.

TS912BID Features


8 Pins
supply voltage of 3V
92.04dB voltage gain
Output Type: Rail-to-Rail


TS912BID Applications


There are a lot of STMicroelectronics
TS912BID Instrumentational OP Amps applications.


  • Differentiator circuits
  • Logarithmic operation circuits
  • Exponential operation circuits
  • Multiplication circuits
  • Division circuits
  • Precision measurement
  • Power control
  • Information processing
  • Weak signal detection
  • Signal amplification
Purchase

You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.

RFQ (Request for Quotations)

It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.

Payment Method

For your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.

IMPORTANT NOTICE

You may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.

Shipping Method

Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...

Shipping Cost

Shipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.

The basic freight (for package ≤0.5 KG ) depends on the time zones and countries

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.

Manufacturer related products

  • STMicroelectronics
    TVS DIODE 5VWM 11.6VC 1610
  • STMicroelectronics
    TVS DIODE 5VWM 9.2VC DO216AA

Catalog related products

  • ROHM Semiconductor
    IC CMOS 2 CIRCUIT 8SOP
  • Diodes Incorporated
    IC OPAMP GP 1 CIRCUIT SOT25
  • Texas Instruments
    IC OPAMP GP 2 CIRCUIT 8SOIC
  • Texas Instruments
    IC OPAMP GP 4 CIRCUIT 14SOIC
  • Texas Instruments
    IC OPAMP GP 2 CIRCUIT 8SOIC
RFQ
BOM