TS5A
Or copy the link below:
- Mfr.Part #
- TS5A
- Manufacturer
- Essentra Components
- Package / Case
- 8-VFSOP (0.091, 2.30mm Width)
- Datasheet
- Download
- Description
- TEAR-TAB CAP - COMPATIBLE THREAD
- Stock
- 9,000
- In Stock ：
- 9,000
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Essentra Components
- Product Category :
- Pbfree Code :
- yes
- Number of Outputs :
- 3
- Number of Pins :
- 8
- Channel-to-Channel Matching (ΔRon) :
- 100m Ω
- Terminal Finish :
- Nickel/Palladium/Gold (Ni/Pd/Au)
- On-state Resistance Match-Nom :
- 0.15Ohm
- REACH SVHC :
- No SVHC
- Thickness :
- 850μm
- Voltage - Supply, Single (V+) :
- 1.65V~5.5V
- Terminal Form :
- Gull wing
- Supply Type :
- Single
- Turn-Off Delay Time :
- 13 ns
- Lifecycle Status :
- ACTIVE (Last Updated: 3 days ago)
- Number of Channels :
- 3
- Number of Inputs :
- 1
- Termination :
- SMD/SMT
- Operating Supply Current :
- 16nA
- Peak Reflow Temperature (Cel) :
- 260
- Max Supply Voltage :
- 5.5V
- Min Supply Voltage :
- 1.65V
- Switch Circuit :
- SP3T
- Height :
- 900μm
- Resistance :
- 900mOhm
- On-State Resistance (Max) :
- 900mOhm
- Switching :
- BREAK-BEFORE-MAKE
- -3db Bandwidth :
- 75MHz
- Number of Functions :
- 1
- Nominal Supply Current :
- 16nA
- Package / Case :
- 8-VFSOP (0.091, 2.30mm Width)
- Operating Temperature :
- -40°C~85°C TA
- Lead Free :
- Lead Free
- Drain to Source Resistance :
- 900mOhm
- Radiation Hardening :
- No
- Charge Injection :
- 20pC
- Switch Time (Ton, Toff) (Max) :
- 21ns, 10.5ns
- Turn On Delay Time :
- 23.5 ns
- Off-state Isolation-Nom :
- 64 dB
- Packaging :
- Tape and Reel (TR)
- Terminal Pitch :
- 0.5mm
- Weight :
- 9.610488mg
- Crosstalk :
- -64dB @ 1MHz
- JESD-609 Code :
- e4
- Bandwidth :
- 100MHz
- Channel Capacitance (CS(off), CD(off)) :
- 18pF 54pF
- ECCN Code :
- EAR99
- Width :
- 2mm
- Factory Lead Time :
- 6 Weeks
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Supply Voltage :
- 1.8V
- Mount :
- Surface Mount
- RoHS Status :
- ROHS3 Compliant
- Current - Leakage (IS(off)) (Max) :
- 20nA
- Pin Count :
- 8
- Base Part Number :
- TS5A3359
- Mounting Type :
- Surface Mount
- Terminal Position :
- Dual
- Length :
- 2.3mm
- Max Supply Current :
- 50nA
- Multiplexer/Demultiplexer Circuit :
- 3:1
- Number of Terminations :
- 8
- Datasheets
- TS5A
21ns, 10.5ns SP3T 900mOhm DUAL Analog Switches BREAK-BEFORE-MAKE TS5A3359 8 Pins 20nA 1.8V 8-VFSOP (0.091, 2.30mm Width)
TS5A3359DCUT Overview
The electrical component comes in 8-VFSOP (0.091, 2.30mm Width) packaging, which makes it convenient to ship overseas. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. In Surface Mount, you'll find this switch device. In the multiplexer and demultiplexer, 3:1 represents the number of circuits. Operating temperature around -40°C~85°C TA extended. In total, 8 terminations have occurred. A electrical component with 3 channels is capable of high-quality output. When the electronic component is given a voltage of 1.8V, it should be turned on and run. Into the electrical component body are injected 8 pins. On the other hand, analog switches can be constructed using SP3T switching circuits. Look for analog switch ic variants by searching with TS5A3359. A 900mOhm internal resistance characterizes this multiplexer. The datasheets for the 8 pins explain the functions. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. A analog switch ic that has a cost-effective Single supply type. It is recommended to use 1.65V as the lowest voltage for the electrical part. The analogue multiplexer could operate on 16nA current. Analogue multiplexers require a 1.65V~5.5V voltage to drain from a single voltage supply. A voltage higher than 50nA may cause damage to the switch multiplexer. Among the inputs that can be operated are the 1 inputs. It is possible to transfer data over a 100MHz-bandwidth. There is 900mOhm Drain to Source resistance on this electronic part. This digital multiplexer has 3 outputs.
TS5A3359DCUT Features
3 Channels
Switch Circuit: SP3T
16nA Supply Current
-3db Bandwidth: 75MHz
Bandwidth: 100MHz
Drain-to-Source resistance: 900mOhm
TS5A3359DCUT Applications
There are a lot of Texas Instruments
TS5A3359DCUT Analog Switches & Multiplexers ICs applications.
- Audio and video switching
- Automatic test equipment
- Precision data acquisition
- Battery-powered systems
- Sample-and-hold systems
- Communication systems
- Data Acquisition Systems
- Relay Replacement
- Battery Powered Systems
- Existing multiplexer applications (both fault-protected and nonfault-protected)
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
Manufacturer related products
Catalog related products
Related products
- Follow Us
-
- Payment
-
- Subscribe
- Certification
-
-
