TPA2011D1YFFT
- Mfr.Part #
- TPA2011D1YFFT
- Manufacturer
- Texas Instruments
- Package / Case
- 9-UFBGA, DSBGA
- Datasheet
- Download
- Description
- IC AMP CLASS D MONO 3.24W 9DSBGA
- Stock
- 19,444
- In Stock :
- 19,444
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- Audio Amplifiers
- Terminal Position :
- BOTTOM
- Power Supply Rejection Ratio (PSRR) :
- 86dB
- Terminal Form :
- Ball
- Packaging :
- Tape and Reel (TR)
- Number of Channels :
- 1
- Base Part Number :
- TPA2011
- Package / Case :
- 9-UFBGA, DSBGA
- Max Output Power :
- 3.24W
- JESD-609 Code :
- e1
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Feature :
- Differential Inputs, Short-Circuit and Thermal Protection, Shutdown
- Quiescent Current :
- 1.8mA
- Height :
- 625μm
- Max Output Power x Channels @ Load :
- 3.24W x 1 @ 4 Ω
- Type :
- Class D
- Load Impedance :
- 2kOhm
- REACH SVHC :
- No SVHC
- Thickness :
- 425μm
- Pin Count :
- 9
- Common Mode Rejection Ratio :
- 79 dB
- Surface Mount :
- yes
- Width :
- 1.4mm
- Power Dissipation :
- 525mW
- Lead Free :
- Lead Free
- Number of Terminations :
- 9
- Factory Lead Time :
- 6 Weeks
- Terminal Pitch :
- 0.4mm
- Peak Reflow Temperature (Cel) :
- 260
- Nominal Supply Current :
- 1.5mA
- Mounting Type :
- Surface Mount
- Number of Functions :
- 1
- Operating Temperature :
- -40°C~85°C TA
- Lifecycle Status :
- ACTIVE (Last Updated: 3 days ago)
- Length :
- 1.4mm
- Power Supplies :
- 3/5V
- Voltage - Supply :
- 2.5V~5.5V
- Number of Pins :
- 9
- Bandwidth :
- 20 kHz
- Output Type :
- 1-Channel (Mono)
- Supply Voltage-Min (Vsup) :
- 2.5V
- Pbfree Code :
- yes
- Output Power :
- 3.24W
- Radiation Hardening :
- No
- RoHS Status :
- ROHS3 Compliant
- Terminal Finish :
- Tin/Silver/Copper (Sn/Ag/Cu)
- Max Power Dissipation :
- 525mW
- Supply Voltage-Max (Vsup) :
- 5.5V
- Datasheets
- TPA2011D1YFFT

1.5mA mA 20 kHz kHz 3.24W W Audio Amplifiers 625μm mm 1.4mm mm 525mW W 5.5V V 9 pins 9-UFBGA, DSBGA
TPA2011D1YFFT Overview
In the 9-UFBGA, DSBGA package, it is embedded.In this case, it is packaged as Tape & Reel (TR) .In addition, there are 9 terminations, which involve the termination of a transmission line with a device that matches the characteristic impedance of the line.In the configuration, 1-Channel (Mono) is used as the output.This electrical device is classified as type Class D .As part of a signal interface in a computer or other communication device, there are 9 pins, which are pronged contacts.In this case, the electronic part is mounted in the way of Surface Mount .There is 2.5V~5.5V voltage supply to this electrical device.1 channels are available on the device.Operating with Differential Inputs, Short-Circuit and Thermal Protection, Shutdown is possible.Temperatures should not exceed -40°C~85°C TA .There are 9 pins on this device.Amp parts belongs to the TPA2011 family.According to the manufacturer, the maximum output power of this electronic component is 3.24W kWh per hour.A normal operation requires a supply voltage (Vsup) above 2.5V .In this case, the maximum supply voltage (Vsup) reaches 5.5V .Power is supplied by a 3/5V volt source.Despite being unaffected by external factors, it consumes 1.8mA of quiescent current.
TPA2011D1YFFT Features
9-UFBGA, DSBGA package
9 pin count
TPA2011 family
3.24W kWh per hour
TPA2011D1YFFT Applications
There are a lot of Texas Instruments
TPA2011D1YFFT audio amplifiers applications.
- single/dual op amp sum and difference circuits
- Integrator and differentiator circuits
- Logarithmic and exponential operation circuits
- Multiplication and division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















