TPA2010D1YZFT
Or copy the link below:
- Mfr.Part #
- TPA2010D1YZFT
- Manufacturer
- Texas Instruments
- Package / Case
- 9-UFBGA, DSBGA
- Datasheet
- Download
- Description
- IC AMP CLASS D MONO 2.5W 9DSBGA
- Stock
- 5,790
- In Stock ：
- 5,790
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- Audio Amplifiers
- Feature :
- Depop, Differential Inputs, Shutdown, Thermal Protection
- Quiescent Current :
- 3.4mA
- Bandwidth :
- 20 kHz
- Number of Terminations :
- 9
- Number of Pins :
- 9
- Max Output Power x Channels @ Load :
- 2.5W x 1 @ 4 Ω
- Terminal Form :
- Ball
- Package / Case :
- 9-UFBGA, DSBGA
- Type :
- Class D
- Height :
- 625μm
- RoHS Status :
- ROHS3 Compliant
- Pin Count :
- 9
- Load Impedance :
- 4Ohm
- Operating Temperature :
- -40°C~85°C TA
- Power Supply Rejection Ratio (PSRR) :
- 75dB
- JESD-609 Code :
- e1
- Nominal Supply Current :
- 2.8mA
- Number of Channels :
- 1
- Voltage - Supply :
- 2.5V~5.5V
- Lead Free :
- Lead Free
- Supply Type :
- Single
- Base Part Number :
- TPA2010
- REACH SVHC :
- No SVHC
- Peak Reflow Temperature (Cel) :
- 260
- Terminal Finish :
- Tin/Silver/Copper (Sn/Ag/Cu)
- Common Mode Rejection Ratio :
- 68 dB
- Pbfree Code :
- yes
- Power Supplies :
- 3/5V
- Packaging :
- Tape and Reel (TR)
- Lifecycle Status :
- ACTIVE (Last Updated: 4 days ago)
- Factory Lead Time :
- 6 Weeks
- Max Power Dissipation :
- 780mW
- Supply Voltage-Max (Vsup) :
- 5.5V
- Terminal Pitch :
- 0.5mm
- Mounting Type :
- Surface Mount
- Contact Plating :
- Copper, Silver, Tin
- Radiation Hardening :
- No
- Length :
- 1.75mm
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Supply Voltage-Min (Vsup) :
- 2.5V
- Surface Mount :
- yes
- Width :
- 1.75mm
- Output Type :
- 1-Channel (Mono)
- Number of Functions :
- 1
- Output Power :
- 2.5W
- Power Dissipation :
- 780mW
- Series :
- NanoFree™
- Max Output Power :
- 2.5W
- Terminal Position :
- BOTTOM
- Datasheets
- TPA2010D1YZFT
2.8mA mA 20 kHz kHz 2.5W W Audio Amplifiers 625μm mm 1.75mm mm 780mW W 5.5V V 9 pins 9-UFBGA, DSBGA
TPA2010D1YZFT Overview
There is a device embedded in 9-UFBGA, DSBGA .Amp parts is recommended that the chip be packaged in a Tape & Reel (TR) case.Amp parts is possible to terminate a transmission line wAmp partsh a device matching Amp partss characteristic impedance, referred to as a 9 termination.1-Channel (Mono) is the output configured for it.The device is of type Class D .The 9 pins are pronged contacts which are part of a signal interface in a computer or other communication device.Electronic parts are mounted in the way of Surface Mount .Amp parts is powered by a voltage of 2.5V~5.5V volts.1 channels are present on the device.Operation can be ensured by Depop, Differential Inputs, Shutdown, Thermal Protection .A temperature greater than -40°C~85°C TA should not be used.There are 9 pins present on this device.This is a member of the TPA2010 family.As a result of the limAmp partsations of this electronic part, Amp parts has a maximum output power of 2.5W kWh per hour.To ensure normal operation, the supply voltage (Vsup) must be maintained above 2.5V .The maximum supply voltage (Vsup) is reached at 5.5V .This electronic part has a Single supply type.The device is powered by a voltage of 3/5V volts.This is a member of the NanoFree™ series.3.4mA external influences affect the amount of quiescent current consumed by this device.
TPA2010D1YZFT Features
9-UFBGA, DSBGA package
9 pin count
TPA2010 family
2.5W kWh per hour
NanoFree™ series
TPA2010D1YZFT Applications
There are a lot of Texas Instruments
TPA2010D1YZFT audio amplifiers applications.
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
- Video and image computer boards
- Medical instruments
- Television broadcasting equipment
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
Manufacturer related products
Catalog related products
-Exposed-Pad.jpg)
Related products
- Follow Us
-
- Payment
-
- Subscribe
- Certification
-
-
