TLV2402CD
- Mfr.Part #
- TLV2402CD
- Manufacturer
- Texas Instruments
- Package / Case
- 8-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 2 CIRCUIT 8SOIC
- Stock
- 7,109
- In Stock :
- 7,109
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Amplifier Type :
- GENERAL PURPOSE
- Output Type :
- Rail-to-Rail
- Supply Voltage :
- 2.7V
- JESD-609 Code :
- e4
- Number of Terminations :
- 8
- Output Current :
- 200μA
- RoHS Status :
- ROHS3 Compliant
- Base Part Number :
- TLV2402
- Low-Offset :
- No
- Width :
- 3.91mm
- Length :
- 4.9mm
- Nominal Gain Bandwidth Product :
- 5.5 kHz
- Packaging :
- Tube
- Unity Gain BW-Nom :
- 5.5 kHz
- Number of Pins :
- 8
- REACH SVHC :
- No SVHC
- Number of Functions :
- 2
- Max I/O Voltage :
- 1.2mV
- Mounting Type :
- Surface Mount
- Package / Case :
- 8-SOIC (0.154, 3.90mm Width)
- Operating Supply Current :
- 900nA
- ECCN Code :
- EAR99
- Low-Bias :
- yes
- Terminal Finish :
- Nickel/Palladium/Gold (Ni/Pd/Au)
- Nominal Supply Current :
- 1.98μA
- Radiation Hardening :
- No
- Factory Lead Time :
- 6 Weeks
- Output Current per Channel :
- 200μA
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Voltage - Supply, Single/Dual (±) :
- 2.5V~16V ±1.25V~8V
- Terminal Position :
- Dual
- Average Bias Current-Max (IIB) :
- 0.00035μA
- Operating Temperature :
- 0°C~70°C
- Micropower :
- No
- Thickness :
- 1.58mm
- Lead Free :
- Lead Free
- Pbfree Code :
- yes
- Pin Count :
- 8
- Common Mode Rejection Ratio :
- 63 dB
- Terminal Form :
- Gull wing
- Input Offset Voltage (Vos) :
- 1.2mV
- Voltage Gain :
- 120dB
- Slew Rate :
- 0.0025V/μs
- Lifecycle Status :
- ACTIVE (Last Updated: 2 days ago)
- Programmable Power :
- No
- Height :
- 1.75mm
- Frequency Compensation :
- yes
- Power Supply Rejection Ratio (PSRR) :
- 100dB
- Architecture :
- VOLTAGE-FEEDBACK
- Bias Current-Max (IIB) @25C :
- 0.0003μA
- Number of Channels :
- 2
- Voltage - Input Offset :
- 390μV
- Peak Reflow Temperature (Cel) :
- 260
- Dual Supply Voltage :
- 5V
- Bandwidth :
- 5.5 kHz
- Operating Supply Voltage :
- 8V
- Surface Mount :
- yes
- Current - Input Bias :
- 100pA
- Supply Voltage Limit-Max :
- 17V
- Power Dissipation :
- 710mW
- Datasheets
- TLV2402CD

2 Channels 200μA per Channel 100pA 63 dB Instrumentational OP Amps 0.00035μA 8V 2.5V~16V ±1.25V~8V TLV2402 8 Pins 8-SOIC (0.154, 3.90mm Width)
TLV2402CD Overview
In order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) case is used. There are two types of operational amplifiers in this circuit. In the case of Tube cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 8. It consists of a total of 8 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 2.7V battery. It has 8 pins that make up the linear amplifier. In terms of input offset voltage, operational amplifier rates 1.2mV. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than 0°C~70°C for optimal performance. In order for this instrumentation amplifier to operate, the supply current needs to be between 900nA and 10 . Maintain 120dB as the voltage gain. Buffer op amp is equipped with 2 channels on the device. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. The operating supply voltage of the buffer op amp is rated at 8V.
TLV2402CD Features
8 Pins
supply voltage of 2.7V
120dB voltage gain
Output Type: Rail-to-Rail
TLV2402CD Applications
There are a lot of Texas Instruments
TLV2402CD Instrumentational OP Amps applications.
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















