TLV2371IDR
- Mfr.Part #
- TLV2371IDR
- Manufacturer
- Texas Instruments
- Package / Case
- 8-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 1 CIRCUIT 8SOIC
- Stock
- 4,763
- In Stock :
- 4,763
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Programmable Power :
- No
- Voltage Gain :
- 110dB
- JESD-609 Code :
- e4
- Output Current :
- 16mA
- Nominal Gain Bandwidth Product :
- 3MHz
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Bias Current-Max (IIB) @25C :
- 0.00006μA
- Input Offset Voltage (Vos) :
- 4.5mV
- Slew Rate :
- 2.1V/μs
- Lifecycle Status :
- ACTIVE (Last Updated: 3 days ago)
- Output Current per Channel :
- 16mA
- Average Bias Current-Max (IIB) :
- 0.00006μA
- Operating Supply Voltage :
- 8V
- Peak Reflow Temperature (Cel) :
- 260
- Packaging :
- Cut Tape (CT)
- Pbfree Code :
- yes
- Pin Count :
- 8
- Height :
- 1.75mm
- Surface Mount :
- yes
- Thickness :
- 1.58mm
- Unity Gain BW-Nom :
- 3000 kHz
- Terminal Form :
- Gull wing
- Common Mode Rejection Ratio :
- 50 dB
- Base Part Number :
- TLV2371
- REACH SVHC :
- No SVHC
- Bandwidth :
- 2.4MHz
- Low-Offset :
- No
- Current - Input Bias :
- 1pA
- Operating Temperature :
- -40°C~125°C
- Mounting Type :
- Surface Mount
- Operating Supply Current :
- 750µA
- Frequency Compensation :
- yes
- Power Supply Rejection Ratio (PSRR) :
- 70dB
- Number of Functions :
- 1
- Terminal Finish :
- Nickel/Palladium/Gold (Ni/Pd/Au)
- Number of Terminations :
- 8
- Number of Pins :
- 8
- Max I/O Voltage :
- 4.5mV
- Voltage - Supply, Single/Dual (±) :
- 2.7V~16V ±1.35V~8V
- Package / Case :
- 8-SOIC (0.154, 3.90mm Width)
- RoHS Status :
- ROHS3 Compliant
- Factory Lead Time :
- 6 Weeks
- Length :
- 4.9mm
- Number of Channels :
- 1
- Amplifier Type :
- GENERAL PURPOSE
- Terminal Position :
- Dual
- Supply Voltage :
- 5V
- Low-Bias :
- yes
- Architecture :
- VOLTAGE-FEEDBACK
- Width :
- 3.91mm
- Radiation Hardening :
- No
- Micropower :
- No
- Power Dissipation :
- 710mW
- ECCN Code :
- EAR99
- Nominal Supply Current :
- 900μA
- Packing Method :
- TR
- Input Offset Current-Max (IIO) :
- 0.00006μA
- Voltage - Input Offset :
- 2mV
- Lead Free :
- Lead Free
- Output Type :
- Rail-to-Rail
- Datasheets
- TLV2371IDR

1 Channels 16mA per Channel 1pA 50 dB Instrumentational OP Amps 0.00006μA 8V 2.7V~16V ±1.35V~8V TLV2371 8 Pins 8-SOIC (0.154, 3.90mm Width)
TLV2371IDR Overview
A 8-SOIC (0.154, 3.90mm Width) case is used to package the op amp. General Purpose-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Cut Tape (CT) case. It is estimated that there will be 8 terminations in the next few months. There are a total of 8 pins on this op amp. It is important to remember that this op amp should be operated at a voltage of 5V volts. There are 8 pins on this chip. In terms of the input offset voltage, instrumentation amplifier rates at 4.5mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . An 750μA volt supply current is needed for this linear amplifier to operate. Voltage gain should remain at 110dB. There are 1 channels on the operational amplifiers. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. The operating supply voltage of the buffer op amp is rated at 8V. The instrumentation amplifier is packed in the form of TR.
TLV2371IDR Features
8 Pins
supply voltage of 5V
110dB voltage gain
Output Type: Rail-to-Rail
TLV2371IDR Applications
There are a lot of Texas Instruments
TLV2371IDR Instrumentational OP Amps applications.
- Addition operation circuits
- Subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















