TLE2144CDWRG4
- Mfr.Part #
- TLE2144CDWRG4
- Manufacturer
- Texas Instruments
- Package / Case
- 16-SOIC (0.295, 7.50mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 4 CIRCUIT 16SOIC
- Stock
- 1,892
- In Stock :
- 1,892
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Power Supplies :
- 5/+-15V
- Frequency Compensation :
- yes
- Terminal Pitch :
- 1.27mm
- Surface Mount :
- yes
- Programmable Power :
- No
- Lifecycle Status :
- ACTIVE (Last Updated: 3 days ago)
- Terminal Finish :
- Nickel/Palladium/Gold (Ni/Pd/Au)
- Supply Voltage :
- 15V
- Power :
- No
- Packing Method :
- TR
- Series :
- Excalibur™
- Low-Offset :
- No
- Length :
- 10.3mm
- Radiation Hardening :
- No
- Nominal Supply Current :
- 18mA
- Voltage - Supply, Single/Dual (±) :
- 4V~44V ±2V~22V
- Current - Input Bias :
- 700nA
- Peak Reflow Temperature (Cel) :
- 260
- Voltage Gain :
- 99.55dB
- Input Offset Voltage (Vos) :
- 600μV
- Low-Bias :
- No
- Bandwidth :
- 5.8MHz
- Number of Terminations :
- 16
- Bias Current-Max (IIB) @25C :
- 2µA
- Amplifier Type :
- GENERAL PURPOSE
- Height :
- 2.65mm
- Operating Supply Voltage :
- 22V
- Output Current :
- 50mA
- Gain Bandwidth Product :
- 5.9MHz
- Average Bias Current-Max (IIB) :
- 1.6μA
- Pbfree Code :
- yes
- Pin Count :
- 16
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- RoHS Status :
- ROHS3 Compliant
- Architecture :
- VOLTAGE-FEEDBACK
- Packaging :
- Tape and Reel (TR)
- Package / Case :
- 16-SOIC (0.295, 7.50mm Width)
- Nominal Gain Bandwidth Product :
- 5.8MHz
- Input Offset Current-Max (IIO) :
- 0.1μA
- Neg Supply Voltage-Nom (Vsup) :
- -15V
- Thickness :
- 2.35mm
- Number of Pins :
- 16
- Terminal Position :
- Dual
- Micropower :
- No
- Base Part Number :
- TLE2144
- Mounting Type :
- Surface Mount
- Lead Free :
- Lead Free
- Operating Temperature :
- 0°C~70°C
- Slew Rate :
- 45V/µs
- Width :
- 7.5mm
- Terminal Form :
- Gull wing
- Output Current per Channel :
- 50mA
- ECCN Code :
- EAR99
- Operating Supply Current :
- 13.8mA
- Factory Lead Time :
- 6 Weeks
- Number of Functions :
- 4
- Common Mode Rejection Ratio :
- 85 dB
- Unity Gain BW-Nom :
- 6000 kHz
- JESD-609 Code :
- e4
- Number of Circuits :
- 4
- Max I/O Voltage :
- 3.8mV
- Datasheets
- TLE2144CDWRG4

50mA per Channel 700nA 85 dB Instrumentational OP Amps 1.6μA 22V 4V~44V ±2V~22V TLE2144 16 Pins 16-SOIC (0.295, 7.50mm Width)
TLE2144CDWRG4 Overview
In order to protect the op amps, a 16-SOIC (0.295, 7.50mm Width) case is used. There are two types of operational amplifiers in this circuit. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 16. It consists of a total of 16 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 15V battery. It has 16 pins that make up the linear amplifier. In terms of input offset voltage, operational amplifier rates 600μV. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than 0°C~70°C for optimal performance. In order for this instrumentation amplifier to operate, the supply current needs to be between 13.8mA and 10 . Maintain 99.55dB as the voltage gain. In total, there are 4 circuits on this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 22V. As a result of this, the buffer amplifier is packed in TR. Excalibur™ is the number that corresponds to the series of the buffer op amp.
TLE2144CDWRG4 Features
16 Pins
supply voltage of 15V
99.55dB voltage gain
TLE2144CDWRG4 Applications
There are a lot of Texas Instruments
TLE2144CDWRG4 Instrumentational OP Amps applications.
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















