TLE2142ID
- Mfr.Part #
- TLE2142ID
- Manufacturer
- Texas Instruments
- Package / Case
- 8-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 2 CIRCUIT 8SOIC
- Stock
- 113,372
- In Stock :
- 113,372
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Max Supply Current :
- 8.8mA
- Nominal Gain Bandwidth Product :
- 5.8MHz
- Bandwidth :
- 5.8MHz
- Frequency Compensation :
- yes
- ECCN Code :
- EAR99
- Length :
- 4.9mm
- Packaging :
- Tube
- Amplifier Type :
- GENERAL PURPOSE
- Dual Supply Voltage :
- 9V
- Operating Temperature :
- -40°C~105°C
- Output Current :
- 50mA
- Unity Gain BW-Nom :
- 6000 kHz
- Slew Rate :
- 45V/µs
- Pin Count :
- 8
- Radiation Hardening :
- No
- Average Bias Current-Max (IIB) :
- 1.7μA
- Number of Functions :
- 2
- Nominal Supply Current :
- 9mA
- Terminal Form :
- Gull wing
- Base Part Number :
- TLE2142
- Operating Supply Current :
- 6.9mA
- Micropower :
- No
- Common Mode Rejection Ratio :
- 85 dB
- Output Current per Channel :
- 50mA
- Low-Bias :
- No
- Current - Input Bias :
- 700nA
- Width :
- 3.91mm
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- RoHS Status :
- ROHS3 Compliant
- REACH SVHC :
- No SVHC
- Low-Offset :
- No
- Input Offset Voltage (Vos) :
- 1.9mV
- Voltage - Supply, Single/Dual (±) :
- 4V~44V ±2V~22V
- JESD-609 Code :
- e4
- Max I/O Voltage :
- 1.9mV
- Architecture :
- VOLTAGE-FEEDBACK
- Lead Free :
- Lead Free
- Number of Channels :
- 2
- Number of Terminations :
- 8
- Programmable Power :
- No
- Voltage Gain :
- 106.85dB
- Terminal Position :
- Dual
- Number of Pins :
- 8
- Input Offset Current-Max (IIO) :
- 0.1μA
- Power :
- No
- Voltage - Input Offset :
- 290μV
- Pbfree Code :
- yes
- Operating Supply Voltage :
- 22V
- Package / Case :
- 8-SOIC (0.154, 3.90mm Width)
- Lifecycle Status :
- ACTIVE (Last Updated: 5 days ago)
- Series :
- Excalibur™
- Power Supplies :
- 5/+-15V
- Factory Lead Time :
- 6 Weeks
- Thickness :
- 1.58mm
- Mounting Type :
- Surface Mount
- Supply Voltage :
- 15V
- Surface Mount :
- yes
- Peak Reflow Temperature (Cel) :
- 260
- Gain Bandwidth Product :
- 5.9MHz
- Terminal Finish :
- Nickel/Palladium/Gold (Ni/Pd/Au)
- Neg Supply Voltage-Nom (Vsup) :
- -15V
- Height :
- 1.75mm
- Datasheets
- TLE2142ID
TLE2142ID Documents

2 Channels 50mA per Channel 700nA 85 dB Instrumentational OP Amps 1.7μA 22V 4V~44V ±2V~22V TLE2142 8 Pins 8-SOIC (0.154, 3.90mm Width)
TLE2142ID Overview
In order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) case is used. There are two types of operational amplifiers in this circuit. In the case of Tube cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 8. It consists of a total of 8 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 15V battery. It has 8 pins that make up the linear amplifier. In terms of input offset voltage, operational amplifier rates 1.9mV. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~105°C for optimal performance. In order for this instrumentation amplifier to operate, the supply current needs to be between 6.9mA and 10 . Maintain 106.85dB as the voltage gain. Buffer op amp is equipped with 2 channels on the device. The operating supply voltage of the buffer op amp is rated at 22V. Excalibur™ is the number that corresponds to the series of the buffer op amp.
TLE2142ID Features
8 Pins
supply voltage of 15V
106.85dB voltage gain
TLE2142ID Applications
There are a lot of Texas Instruments
TLE2142ID Instrumentational OP Amps applications.
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















