TLE2084ACDWG4
- Mfr.Part #
- TLE2084ACDWG4
- Manufacturer
- Texas Instruments
- Package / Case
- SOIC
- Datasheet
- Download
- Description
- IC OPAMP JFET 10MHZ 16SOIC
- Stock
- 34,019
- In Stock :
- 34,019
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Low-Bias :
- yes
- Height :
- 2.35mm
- Min Dual Supply Voltage :
- 2.25V
- Number of Circuits :
- 4
- Package / Case :
- SOIC
- RoHS Status :
- RoHS Compliant
- Dual Supply Voltage :
- 9V
- Output Current per Channel :
- 48mA
- Voltage - Supply, Single/Dual (±) :
- 4.5 V ~ 38 V, ±2.25 V ~ 19 V
- Min Operating Temperature :
- 0°C
- Nominal Supply Current :
- 7.5mA
- Operating Supply Voltage :
- 19V
- Voltage Gain :
- 106dB
- Input Offset Voltage (Vos) :
- 4mV
- Radiation Hardening :
- No
- Max I/O Voltage :
- 4mV
- Mounting Type :
- Surface Mount
- Power Dissipation :
- 1.025W
- Temperature Grade :
- COMMERCIAL
- Max Operating Temperature :
- 70°C
- Terminal Pitch :
- 1.27mm
- Amplifier Type :
- Operational Amplifier
- JESD-609 Code :
- e4
- Base Part Number :
- TLE2084A
- Current - Supply :
- 6.5mA
- Voltage - Input Offset :
- 500μV
- Architecture :
- VOLTAGE-FEEDBACK
- Supply Voltage :
- 5V
- Frequency Compensation :
- yes
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Length :
- 10.28mm
- Bias Current-Max (IIB) @25C :
- 0.000175μA
- Average Bias Current-Max (IIB) :
- 0.005μA
- Terminal Finish :
- Nickel/Palladium/Gold (Ni/Pd/Au)
- Surface Mount :
- yes
- Operating Temperature :
- 0°C ~ 70°C
- Number of Terminations :
- 16
- Packaging :
- Rail/Tube
- ECCN Code :
- EAR99
- Number of Functions :
- 4
- Peak Reflow Temperature (Cel) :
- 260
- Series :
- Excalibur™
- Terminal Position :
- Dual
- Number of Elements :
- 4
- Width :
- 7.52mm
- Pin Count :
- 16
- Terminal Form :
- Gull wing
- Gain Bandwidth Product :
- 9.4MHz
- Neg Supply Voltage-Nom (Vsup) :
- -5V
- Max Dual Supply Voltage :
- 19V
- Operating Supply Current :
- 6.5mA
- Current - Output / Channel :
- 48mA
- Nominal Gain Bandwidth Product :
- 9.4MHz
- Low-Offset :
- No
- Current - Output :
- 48mA
- Output Type :
- --
- Slew Rate :
- 35 V/μs
- Current - Input Bias :
- 175pA
- Bandwidth :
- 9.4MHz
- Lead Free :
- Lead Free
- Supplier Device Package :
- 16-SOIC
- Unity Gain BW-Nom :
- 9400 kHz
- Number of Pins :
- 16
- Common Mode Rejection Ratio :
- 70 dB
- Datasheets
- TLE2084ACDWG4

48mA per Channel 175pA 70 dB Instrumentational OP Amps 0.005μA 19V 4.5 V ~ 38 V, ±2.25 V ~ 19 V TLE2084A 16 Pins SOIC
TLE2084ACDWG4 Overview
A SOIC case is used to package the op amp. OPERATIONAL AMPLIFIER-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Rail/Tube case. It is estimated that there will be 16 terminations in the next few months. There are a total of 16 pins on this op amp. It is important to remember that this op amp should be operated at a voltage of 5V volts. There are 16 pins on this chip. In terms of the input offset voltage, instrumentation amplifier rates at 4mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about 0°C ~ 70°C . An 6.5mA volt supply current is needed for this linear amplifier to operate. Voltage gain should remain at 106dB. On this instrumentation amplifier, there are 4 circuits that are connected together. One of the advantages of this op amp is that it outputs -- signals, which is one of its many advantages. In order for op amp to function properly, the temperature should not be lower than 0°C degrees Celsius. It should only be used at temperatures up above 70°C. The buffer op amp is rated for an operating voltage of 4 when it comes to the power supply. The operating supply voltage of the buffer op amp is rated at 19V. As a recommendation, this electronic component should be used with a power supply that can deliver 6.5mA. The dual supply voltage of 19V should be used for the conduct of this electronic component. The Excalibur™ indicates the series number of the op amp.
TLE2084ACDWG4 Features
16 Pins
supply voltage of 5V
106dB voltage gain
Output Type: --
TLE2084ACDWG4 Applications
There are a lot of Texas Instruments
TLE2084ACDWG4 Instrumentational OP Amps applications.
- Addition operation circuits
- Subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















