TLC4501AID
- Mfr.Part #
- TLC4501AID
- Manufacturer
- Texas Instruments
- Package / Case
- 8-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 1 CIRCUIT 8SOIC
- Stock
- 5,941
- In Stock :
- 5,941
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Lifecycle Status :
- ACTIVE (Last Updated: 12 hours ago)
- Slew Rate :
- 2.5V/µs
- Output Current per Channel :
- 50mA
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Height :
- 1.75mm
- Power Dissipation :
- 725mW
- Pin Count :
- 8
- Number of Terminations :
- 8
- Base Part Number :
- TLC4501
- Bandwidth :
- 4.7MHz
- Operating Supply Current :
- 1mA
- Terminal Form :
- Gull wing
- Voltage Gain :
- 120dB
- Architecture :
- CHOPPER-STAB
- Series :
- LinEPIC™, Self-Cal™
- Current - Input Bias :
- 1pA
- JESD-609 Code :
- e4
- Length :
- 4.9mm
- Supply Voltage :
- 5V
- Lead Free :
- Lead Free
- Amplifier Type :
- GENERAL PURPOSE
- Number of Elements :
- 1
- Voltage - Supply, Single/Dual (±) :
- 4V~6V ±2V~3V
- ECCN Code :
- EAR99
- Terminal Finish :
- Nickel/Palladium/Gold (Ni/Pd/Au)
- Peak Reflow Temperature (Cel) :
- 260
- Frequency Compensation :
- yes
- Low-Offset :
- yes
- Low-Bias :
- yes
- Input Offset Voltage (Vos) :
- 40μV
- Mounting Type :
- Surface Mount
- Nominal Supply Current :
- 1.5mA
- Factory Lead Time :
- 6 Weeks
- Output Current :
- 50mA
- Number of Pins :
- 8
- Terminal Position :
- Dual
- Number of Functions :
- 1
- Voltage - Input Offset :
- 10μV
- Power Supplies :
- 5V
- Packaging :
- Tube
- Radiation Hardening :
- No
- Supply Voltage Limit-Max :
- 7V
- Pbfree Code :
- yes
- Surface Mount :
- yes
- Input Offset Current-Max (IIO) :
- 0.00006μA
- Programmable Power :
- No
- Max I/O Voltage :
- 40μV
- Average Bias Current-Max (IIB) :
- 0.00006μA
- RoHS Status :
- ROHS3 Compliant
- Common Mode Rejection Ratio :
- 90 dB
- Micropower :
- No
- Thickness :
- 1.58mm
- Output Type :
- Rail-to-Rail
- Package / Case :
- 8-SOIC (0.154, 3.90mm Width)
- Width :
- 3.91mm
- Operating Temperature :
- -40°C~125°C
- Bias Current-Max (IIB) @25C :
- 0.00006μA
- Unity Gain BW-Nom :
- 4700 kHz
- Datasheets
- TLC4501AID

50mA per Channel 1pA 90 dB Instrumentational OP Amps 0.00006μA 4V~6V ±2V~3V TLC4501 8 Pins 8-SOIC (0.154, 3.90mm Width)
TLC4501AID Overview
It is packaged in an 8-SOIC (0.154, 3.90mm Width)-case that protects the operational amplifiers from damage. An op amp of this type is a General Purpose-type. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. It is estimated that there will be at least 8 terminations this year. A total of 8 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. In total, the buffer amplifier consists of 8 pins. Op amp ic rates 40μV for input offset voltage. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. A supply current of 1mA can be used to operate this linear amplifier. There should be no change in the voltage gain at 120dB. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. There are 1 elements in this buffer amplifier. Buffer op amp series numbers are indicated by the LinEPIC™, Self-Cal™.
TLC4501AID Features
8 Pins
supply voltage of 5V
120dB voltage gain
Output Type: Rail-to-Rail
TLC4501AID Applications
There are a lot of Texas Instruments
TLC4501AID Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















