TLC272CPW
- Mfr.Part #
- TLC272CPW
- Manufacturer
- Texas Instruments
- Package / Case
- 8-TSSOP (0.173, 4.40mm Width)
- Datasheet
- Download
- Description
- IC CMOS 2 CIRCUIT 8TSSOP
- Stock
- 73,998
- In Stock :
- 73,998
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Mounting Type :
- Surface Mount
- Input Offset Voltage (Vos) :
- 10mV
- Number of Channels :
- 2
- Nominal Gain Bandwidth Product :
- 1.7MHz
- Voltage - Input Offset :
- 1.1mV
- Micropower :
- No
- Terminal Pitch :
- 0.65mm
- Peak Reflow Temperature (Cel) :
- 260
- Pin Count :
- 8
- Max I/O Voltage :
- 10mV
- Operating Supply Current :
- 1.9mA
- REACH SVHC :
- No SVHC
- Supply Voltage :
- 5V
- Radiation Hardening :
- No
- Input Offset Current-Max (IIO) :
- 0.00006μA
- Factory Lead Time :
- 6 Weeks
- Low-Offset :
- No
- Architecture :
- VOLTAGE-FEEDBACK
- Height :
- 1.2mm
- Surface Mount :
- yes
- Output Current per Channel :
- 30mA
- RoHS Status :
- ROHS3 Compliant
- Terminal Form :
- Gull wing
- Frequency Compensation :
- yes
- Package / Case :
- 8-TSSOP (0.173, 4.40mm Width)
- Common Mode Rejection Ratio :
- 65 dB
- Base Part Number :
- TLC272
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Unity Gain BW-Nom :
- 2000 kHz
- Slew Rate :
- 5.3V/μs
- Current - Input Bias :
- 0.7pA
- Terminal Position :
- Dual
- Length :
- 3mm
- ECCN Code :
- EAR99
- Nominal Supply Current :
- 4mA
- Programmable Power :
- No
- Gain Bandwidth Product :
- 2.2MHz
- Number of Terminations :
- 8
- Number of Functions :
- 2
- Average Bias Current-Max (IIB) :
- 0.00006μA
- Lead Free :
- Lead Free
- Width :
- 4.4mm
- Bandwidth :
- 1.7MHz
- Amplifier Type :
- GENERAL PURPOSE
- Voltage Gain :
- 87.23dB
- Voltage - Supply, Single/Dual (±) :
- 3V~16V ±1.5V~8V
- Thickness :
- 1mm
- Number of Pins :
- 8
- Operating Temperature :
- 0°C~70°C
- Bias Current-Max (IIB) @25C :
- 0.00006μA
- Power Dissipation :
- 525mW
- Terminal Finish :
- Nickel/Palladium/Gold (Ni/Pd/Au)
- Low-Bias :
- yes
- Series :
- LinCMOS™
- JESD-609 Code :
- e4
- Lifecycle Status :
- ACTIVE (Last Updated: 2 days ago)
- Power Supplies :
- 3/16V
- Packaging :
- Tube
- Pbfree Code :
- yes
- Datasheets
- TLC272CPW

2 Channels 30mA per Channel 0.7pA 65 dB Instrumentational OP Amps 0.00006μA 3V~16V ±1.5V~8V TLC272 8 Pins 8-TSSOP (0.173, 4.40mm Width)
TLC272CPW Description
With the TLC272CPW, you can get a range of input offset voltage grades with low offset voltage drift, high input impedance, low noise, and speeds that are comparable to those of a general-purpose BiFET device. The TLC272CPW is equipped with Texas Instruments LinCMOSTM silicon-gate technology, which is far more stable than metal-gate technology.
Its extremely high input impedance, low bias currents, and high slew rates make this device ideal for applications that had previously been reserved for BiFETs and NFETs.
This TLC272CPW's advantages, combined with good common-mode rejection and supply voltage rejection, make it a good choice for both new state-of-the-art designs and upgrades to current designs. There are many features associated with bipolar technology that is available on LinCMOSTM operational amplifiers without the associated power penalty.
TLC272CPW Features
-
Input offset voltage drift- Typically 0.1μV/month, including the first 30 days
-
Common-mode input voltage range extends below the negative rail
-
Output voltage range includes the negative rail
-
ESD-protection circuitry
-
Designed-in latch-up immunity
-
25nV/√Hz at f=1kHz Typically low noise
-
1012 Typical high input impedance
-
1.8μV/°C Typical offset drift
-
75dB Typical CMRR
-
80dB CMRR
-
Single-supply operation
-
Green product and no Sb/Br
TLC272CPW Applications
-
DVD Recorders and Players
-
Pro Audio Mixers
-
High-Input-Impedance Wideband Amplifiers
-
Voltage Followers (e.g. Follower for Single-Supply D/A Converter)
-
Voltage Regulators (Permits Control of Output Voltage Down to 0V)
-
Peak Detectors
-
Single-Supply Full-Wave Precision Rectifiers
-
Photo-Diode Sensor Amplifiers
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















