TLC2264ID
- Mfr.Part #
- TLC2264ID
- Manufacturer
- Texas Instruments
- Package / Case
- 14-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 4 CIRCUIT 14SOIC
- Stock
- 25,086
- In Stock :
- 25,086
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Terminal Form :
- Gull wing
- Height :
- 1.75mm
- Output Current :
- 50mA
- Unity Gain BW-Nom :
- 710 kHz
- Low-Offset :
- No
- Length :
- 8.65mm
- Voltage Gain :
- 114.81dB
- REACH SVHC :
- No SVHC
- Number of Pins :
- 14
- Package / Case :
- 14-SOIC (0.154, 3.90mm Width)
- Pbfree Code :
- yes
- Pin Count :
- 14
- Peak Reflow Temperature (Cel) :
- 260
- Operating Supply Voltage :
- 8V
- Micropower :
- yes
- Series :
- LinCMOS™
- Input Offset Voltage (Vos) :
- 2.5mV
- Operating Supply Current :
- 850μA
- Radiation Hardening :
- No
- Common Mode Rejection Ratio :
- 70 dB
- Base Part Number :
- TLC2264
- Terminal Position :
- Dual
- Average Bias Current-Max (IIB) :
- 0.0008μA
- ECCN Code :
- EAR99
- Neg Supply Voltage-Nom (Vsup) :
- -5V
- Lifecycle Status :
- ACTIVE (Last Updated: 3 days ago)
- Terminal Pitch :
- 1.27mm
- Output Current per Channel :
- 50mA
- Input Offset Current-Max (IIO) :
- 0.0008μA
- Output Type :
- Rail-to-Rail
- Voltage - Input Offset :
- 300µV
- Supply Voltage Limit-Max :
- 8V
- Number of Functions :
- 4
- Surface Mount :
- yes
- Operating Temperature :
- -40°C~125°C
- Terminal Finish :
- Nickel/Palladium/Gold (Ni/Pd/Au)
- Lead Free :
- Lead Free
- Frequency Compensation :
- yes
- Slew Rate :
- 0.55V/µs
- Bandwidth :
- 820 kHz
- Architecture :
- VOLTAGE-FEEDBACK
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- RoHS Status :
- ROHS3 Compliant
- Gain Bandwidth Product :
- 730kHz
- Number of Terminations :
- 14
- Nominal Supply Current :
- 1mA
- Mounting Type :
- Surface Mount
- Voltage - Supply, Single/Dual (±) :
- 4.4V~16V ±2.2V~8V
- Low-Bias :
- yes
- Current - Input Bias :
- 1pA
- Dual Supply Voltage :
- 5V
- Programmable Power :
- No
- Supply Voltage :
- 5V
- Max I/O Voltage :
- 2.5mV
- Thickness :
- 1.58mm
- Factory Lead Time :
- 6 Weeks
- JESD-609 Code :
- e4
- Amplifier Type :
- GENERAL PURPOSE
- Packaging :
- Tube
- Number of Channels :
- 4
- Nominal Gain Bandwidth Product :
- 710 kHz
- Power Dissipation :
- 950mW
- Width :
- 3.91mm
- Datasheets
- TLC2264ID

4 Channels 50mA per Channel 1pA 70 dB Instrumentational OP Amps 0.0008μA 8V 4.4V~16V ±2.2V~8V TLC2264 14 Pins 14-SOIC (0.154, 3.90mm Width)
TLC2264ID Overview
It is packaged in an 14-SOIC (0.154, 3.90mm Width)-case that protects the operational amplifiers from damage. An op amp of this type is a General Purpose-type. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. It is estimated that there will be at least 14 terminations this year. A total of 14 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. In total, the buffer amplifier consists of 14 pins. Op amp ic rates 2.5mV for input offset voltage. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. A supply current of 850μA can be used to operate this linear amplifier. There should be no change in the voltage gain at 114.81dB. There are a total of 4 channels available on the op amps. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. The operating supply voltage of the buffer op amp is rated at 8V. Buffer op amp series numbers are indicated by the LinCMOS™.
TLC2264ID Features
14 Pins
supply voltage of 5V
114.81dB voltage gain
Output Type: Rail-to-Rail
TLC2264ID Applications
There are a lot of Texas Instruments
TLC2264ID Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















