TLC2264CPWR
- Mfr.Part #
- TLC2264CPWR
- Manufacturer
- Texas Instruments
- Package / Case
- 14-TSSOP (0.173, 4.40mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 4 CIRCUIT 14TSSOP
- Stock
- 6,988
- In Stock :
- 6,988
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Package / Case :
- 14-TSSOP (0.173, 4.40mm Width)
- Number of Terminations :
- 14
- Contact Plating :
- Gold
- Base Part Number :
- TLC2264
- Voltage - Input Offset :
- 300µV
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Terminal Position :
- Dual
- Mounting Type :
- Surface Mount
- Packing Method :
- TR
- Operating Supply Current :
- 850μA
- Architecture :
- VOLTAGE-FEEDBACK
- Frequency Compensation :
- yes
- Lifecycle Status :
- ACTIVE (Last Updated: 3 days ago)
- Pbfree Code :
- yes
- Low-Offset :
- No
- Output Current :
- 50mA
- Programmable Power :
- No
- Power Dissipation :
- 700mW
- Output Current per Channel :
- 50mA
- Amplifier Type :
- GENERAL PURPOSE
- Supply Voltage Limit-Max :
- 8V
- Slew Rate :
- 0.55V/µs
- Low-Bias :
- yes
- Radiation Hardening :
- No
- Input Offset Voltage (Vos) :
- 2.5mV
- Voltage Gain :
- 114.81dB
- Output Type :
- Rail-to-Rail
- Series :
- LinCMOS™
- Lead Free :
- Lead Free
- ECCN Code :
- EAR99
- Voltage - Supply, Single/Dual (±) :
- 4.4V~16V ±2.2V~8V
- Micropower :
- yes
- Supply Voltage :
- 5V
- Common Mode Rejection Ratio :
- 70 dB
- Nominal Gain Bandwidth Product :
- 710 kHz
- Max Power Dissipation :
- 700mW
- Peak Reflow Temperature (Cel) :
- 260
- Surface Mount :
- yes
- Gain Bandwidth Product :
- 730kHz
- Packaging :
- Cut Tape (CT)
- Nominal Supply Current :
- 1mA
- Operating Supply Voltage :
- 8V
- Number of Pins :
- 14
- Number of Functions :
- 4
- Operating Temperature :
- 0°C~70°C
- Average Bias Current-Max (IIB) :
- 0.0001μA
- Number of Channels :
- 4
- Max I/O Voltage :
- 2.5mV
- JESD-609 Code :
- e4
- Pin Count :
- 14
- Factory Lead Time :
- 6 Weeks
- REACH SVHC :
- No SVHC
- Thickness :
- 1mm
- Length :
- 5mm
- Neg Supply Voltage-Nom (Vsup) :
- -5V
- Height :
- 1.2mm
- Terminal Form :
- Gull wing
- Current - Input Bias :
- 1pA
- Input Offset Current-Max (IIO) :
- 0.0001μA
- RoHS Status :
- ROHS3 Compliant
- Bandwidth :
- 710 kHz
- Width :
- 4.4mm
- Unity Gain BW-Nom :
- 710 kHz
- Datasheets
- TLC2264CPWR
TLC2264CPWR Documents

4 Channels 50mA per Channel 1pA 70 dB Instrumentational OP Amps 0.0001μA 8V 4.4V~16V ±2.2V~8V TLC2264 14 Pins 14-TSSOP (0.173, 4.40mm Width)
TLC2264CPWR Overview
In the package, you will find a 14-TSSOP (0.173, 4.40mm Width)-case to contain the op amp ic. The instrumentation amplifier in this picture is of the General Purpose-type. A Cut Tape (CT) case is used for delivering the op amp. During the past two weeks, there have been close to 14 terminations. A total of 14 pins are located on this board. This linear amplifier should be powered by an 5V battery. The op amp ic has an array of 14 pins on it. Op amp rates 2.5mV as input offset voltage. For this electrical component, Surface Mount is the recommended mounting type. According to the manufacturer, this buffer op amp works well at 0°C~70°C , which is a good operating temperature. Using an 850μA supply current, this operational amplifier ics can be operated. You should keep the voltage gain at 114.81dB for the time being. On the buffer amps, there are 4 channels that can be used. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. The operating supply voltage of the buffer op amp is rated at 8V. The linear amplifier is packaged by using a TR axis. In this case, LinCMOS™ represents the instrumentation amplifiers' series number.
TLC2264CPWR Features
14 Pins
supply voltage of 5V
114.81dB voltage gain
Output Type: Rail-to-Rail
TLC2264CPWR Applications
There are a lot of Texas Instruments
TLC2264CPWR Instrumentational OP Amps applications.
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
- Video computer boards
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















