TLC2262CDG4
- Mfr.Part #
- TLC2262CDG4
- Manufacturer
- Texas Instruments
- Package / Case
- 8-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC CMOS 2 CIRCUIT 8SOIC
- Stock
- 22
- In Stock :
- 22
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Package / Case :
- 8-SOIC (0.154, 3.90mm Width)
- Terminal Position :
- Dual
- Power Dissipation :
- 725mW
- Operating Temperature :
- 0°C~70°C
- Unity Gain BW-Nom :
- 730 kHz
- Lead Free :
- Lead Free
- Number of Terminations :
- 8
- Bandwidth :
- 710 kHz
- Architecture :
- VOLTAGE-FEEDBACK
- Common Mode Rejection Ratio :
- 70 dB
- Length :
- 4.9mm
- Peak Reflow Temperature (Cel) :
- 260
- Current - Input Bias :
- 1pA
- Low-Bias :
- yes
- Terminal Form :
- Gull wing
- Pin Count :
- 8
- Output Current per Channel :
- 50mA
- Voltage - Input Offset :
- 300µV
- Nominal Supply Current :
- 500μA
- Input Offset Voltage (Vos) :
- 2.5mV
- Height :
- 1.58mm
- Width :
- 3.91mm
- Programmable Power :
- No
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Max I/O Voltage :
- 2.5mV
- Low-Offset :
- No
- Number of Elements :
- 2
- Supply Voltage :
- 5V
- Operating Supply Current :
- 425µA
- Number of Functions :
- 2
- Nominal Gain Bandwidth Product :
- 710 kHz
- Dual Supply Voltage :
- 5V
- Packaging :
- Tube
- RoHS Status :
- ROHS3 Compliant
- Operating Supply Voltage :
- 8V
- Surface Mount :
- yes
- Gain Bandwidth Product :
- 730kHz
- JESD-609 Code :
- e4
- Mounting Type :
- Surface Mount
- Qualification Status :
- Not Qualified
- Slew Rate :
- 0.55V/µs
- Terminal Finish :
- Nickel/Palladium/Gold (Ni/Pd/Au)
- Supply Voltage Limit-Max :
- 8V
- Voltage - Supply, Single/Dual (±) :
- 4.4V~16V ±2.2V~8V
- Base Part Number :
- TLC2262
- Micropower :
- yes
- Output Current :
- 50mA
- Amplifier Type :
- GENERAL PURPOSE
- ECCN Code :
- EAR99
- Voltage Gain :
- 114.81dB
- Neg Supply Voltage-Nom (Vsup) :
- -5V
- Output Type :
- Rail-to-Rail
- Frequency Compensation :
- yes
- Number of Pins :
- 8
- Time@Peak Reflow Temperature-Max (s) :
- NOT SPECIFIED
- Average Bias Current-Max (IIB) :
- 0.0001μA
- Series :
- LinCMOS™
- Datasheets
- TLC2262CDG4

50mA per Channel 1pA 70 dB Instrumentational OP Amps 0.0001μA 8V 4.4V~16V ±2.2V~8V TLC2262 8 Pins 8-SOIC (0.154, 3.90mm Width)
TLC2262CDG4 Overview
Packaged in a 8-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. An op amp ic of the General Purpose type. The op amp is delivered to you in a Tube case. There is a growing number of terminations approaching the number of 8. The pins on this board total to 8 in total. I would like to remind you that this buffer op amp should be powered by an 5V battery. A total of 8 pins are present on the instrumentation amplifier. There is an input offset voltage of 2.5mV for this buffer op amp. The mounting type that is recommended for this electrical part is Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of 0°C~70°C . As long as the supply current of the chip does not exceed 425μA, this op amp ic can operate. 114.81dB should remain the voltage gain. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. The linear amplifier consists of 2 different elements in total. The operating supply voltage of the buffer op amp is rated at 8V. As the name implies, LinCMOS™ refers to the series of the buffer op amp.
TLC2262CDG4 Features
8 Pins
supply voltage of 5V
114.81dB voltage gain
Output Type: Rail-to-Rail
TLC2262CDG4 Applications
There are a lot of Texas Instruments
TLC2262CDG4 Instrumentational OP Amps applications.
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















