TLC2252CDG4

Share

Or copy the link below:

Mfr.Part #
TLC2252CDG4
Manufacturer
Texas Instruments
Package / Case
8-SOIC (0.154, 3.90mm Width)
Datasheet
Download
Description
IC OPAMP GP 2 CIRCUIT 8SOIC
Stock
1,956
In Stock :
1,956

Request A Quote(RFQ)

* Fullname:
* Company:
* E-Mail:
  Phone:
  Comment:
* Quantity:
Manufacturer :
Texas Instruments
Product Category :
Instrumentation, OP Amps, Buffer Amps
Common Mode Rejection Ratio :
70 dB
Max I/O Voltage :
1.5mV
Operating Supply Voltage :
8V
Thickness :
1.58mm
Programmable Power :
No
Power Dissipation :
724mW
Output Current per Channel :
50mA
Height :
1.75mm
Voltage - Supply, Single/Dual (±) :
4.4V~16V ±2.2V~8V
Low-Offset :
No
Voltage - Input Offset :
200μV
Length :
4.9mm
Input Offset Current-Max (IIO) :
0.00006μA
Terminal Finish :
Nickel/Palladium/Gold (Ni/Pd/Au)
Moisture Sensitivity Level (MSL) :
1 (Unlimited)
Width :
3.91mm
Current - Input Bias :
1pA
Slew Rate :
0.12V/µs
Terminal Position :
Dual
Output Type :
Rail-to-Rail
Amplifier Type :
GENERAL PURPOSE
Micropower :
yes
Number of Functions :
2
Average Bias Current-Max (IIB) :
0.0001μA
Lead Free :
Lead Free
Dual Supply Voltage :
5V
Bandwidth :
200 kHz
Operating Supply Current :
80μA
Bias Current-Max (IIB) @25C :
0.00006μA
Frequency Compensation :
yes
Pbfree Code :
yes
JESD-609 Code :
e4
Packaging :
Tube
Unity Gain BW-Nom :
200 kHz
Architecture :
VOLTAGE-FEEDBACK
Input Offset Voltage (Vos) :
1.5mV
Base Part Number :
TLC2252
Factory Lead Time :
6 Weeks
Nominal Gain Bandwidth Product :
200 kHz
Supply Voltage :
5V
Neg Supply Voltage-Nom (Vsup) :
-5V
RoHS Status :
ROHS3 Compliant
Radiation Hardening :
No
Output Current :
50mA
Mounting Type :
Surface Mount
Voltage Gain :
124.61dB
REACH SVHC :
No SVHC
Surface Mount :
yes
Terminal Form :
Gull wing
Lifecycle Status :
ACTIVE (Last Updated: 3 days ago)
Number of Pins :
8
Series :
LinCMOS™
Low-Bias :
yes
Gain Bandwidth Product :
210kHz
Supply Voltage Limit-Max :
8V
Peak Reflow Temperature (Cel) :
260
ECCN Code :
EAR99
Pin Count :
8
Number of Terminations :
8
Package / Case :
8-SOIC (0.154, 3.90mm Width)
Operating Temperature :
0°C~70°C
Nominal Supply Current :
125μA
Number of Channels :
2
Introducing Instrumentation, OP Amps, Buffer Amps Texas Instruments TLC2252CDG4 from Chip IC,where excellence meets affordability. This product stands out with its Bandwidth:200 kHz, Base Part Number:TLC2252, Mounting Type:Surface Mount, Number of Pins:8, Number of Terminations:8, Package / Case:8-SOIC (0.154, 3.90mm Width), Operating Temperature:0°C~70°C, Number of Channels:2, TLC2252CDG4 pinout, TLC2252CDG4 datasheet PDF, TLC2252CDG4 amp .Beyond Instrumentation, OP Amps, Buffer Amps Texas Instruments TLC2252CDG4 ,we also offer OP07CDR, TS321CX5 RFG, NE5532ADR, Our vast inventory has you covered. Contact us now for immediate solutions.

Texas Instruments TLC2252CDG4


2 Channels 50mA per Channel 1pA 70 dB Instrumentational OP Amps 0.0001μA 8V 4.4V~16V ±2.2V~8V TLC2252 8 Pins 8-SOIC (0.154, 3.90mm Width)

TLC2252CDG4 Overview


In the package, you will find a 8-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. The instrumentation amplifier in this picture is of the General Purpose-type. A Tube case is used for delivering the op amp. During the past two weeks, there have been close to 8 terminations. A total of 8 pins are located on this board. This linear amplifier should be powered by an 5V battery. The op amp ic has an array of 8 pins on it. Op amp rates 1.5mV as input offset voltage. For this electrical component, Surface Mount is the recommended mounting type. According to the manufacturer, this buffer op amp works well at 0°C~70°C , which is a good operating temperature. Using an 80μA supply current, this operational amplifier ics can be operated. You should keep the voltage gain at 124.61dB for the time being. On the buffer amps, there are 2 channels that can be used. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. The operating supply voltage of the buffer op amp is rated at 8V. In this case, LinCMOS™ represents the instrumentation amplifiers' series number.

TLC2252CDG4 Features


8 Pins
supply voltage of 5V
124.61dB voltage gain
Output Type: Rail-to-Rail


TLC2252CDG4 Applications


There are a lot of Texas Instruments
TLC2252CDG4 Instrumentational OP Amps applications.


  • Multiplication circuits
  • Division circuits
  • Precision measurement
  • Power control
  • Information processing
  • Weak signal detection
  • Signal amplification
  • Signal filtering
  • Signal operation
  • Video computer boards
Purchase

You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.

RFQ (Request for Quotations)

It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.

Payment Method

For your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.

IMPORTANT NOTICE

You may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.

Shipping Method

Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...

Shipping Cost

Shipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.

The basic freight (for package ≤0.5 KG ) depends on the time zones and countries

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.

Manufacturer related products

Catalog related products

  • ROHM Semiconductor
    IC CMOS 2 CIRCUIT 8SOP
  • Diodes Incorporated
    IC OPAMP GP 1 CIRCUIT SOT25
  • Texas Instruments
    IC OPAMP GP 2 CIRCUIT 8SOIC
  • Texas Instruments
    IC OPAMP GP 4 CIRCUIT 14SOIC
  • Texas Instruments
    IC OPAMP GP 2 CIRCUIT 8SOIC
RFQ
BOM