TLC2201CDG4
- Mfr.Part #
- TLC2201CDG4
- Manufacturer
- Texas Instruments
- Package / Case
- 8-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 1 CIRCUIT 8SOIC
- Stock
- 23
- In Stock :
- 23
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Output Type :
- Rail-to-Rail
- Low-Bias :
- yes
- Neg Supply Voltage-Nom (Vsup) :
- -5V
- Thickness :
- 1.58mm
- Output Current per Channel :
- 50mA
- Operating Supply Current :
- 1.1mA
- Number of Pins :
- 8
- Number of Channels :
- 1
- Factory Lead Time :
- 6 Weeks
- Frequency Compensation :
- yes
- Current - Input Bias :
- 1pA
- Mounting Type :
- Surface Mount
- Pbfree Code :
- yes
- Bandwidth :
- 1.9MHz
- Number of Functions :
- 1
- Package / Case :
- 8-SOIC (0.154, 3.90mm Width)
- Series :
- LinCMOS™
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Operating Supply Voltage :
- 8V
- Amplifier Type :
- GENERAL PURPOSE
- Nominal Supply Current :
- 1.5mA
- RoHS Status :
- ROHS3 Compliant
- Supply Voltage Limit-Max :
- 8V
- Terminal Position :
- Dual
- Packaging :
- Tube
- Lifecycle Status :
- ACTIVE (Last Updated: 2 days ago)
- Operating Temperature :
- 0°C~70°C
- Power Dissipation :
- 725mW
- Voltage - Input Offset :
- 100μV
- Micropower :
- No
- Peak Reflow Temperature (Cel) :
- 260
- Low-Offset :
- yes
- Lead Free :
- Lead Free
- Max I/O Voltage :
- 500μV
- Nominal Gain Bandwidth Product :
- 1.9MHz
- Radiation Hardening :
- No
- ECCN Code :
- EAR99
- Pin Count :
- 8
- Terminal Finish :
- Nickel/Palladium/Gold (Ni/Pd/Au)
- Voltage Gain :
- 109.97dB
- Number of Terminations :
- 8
- Voltage - Supply, Single/Dual (±) :
- 4.6V~16V ±2.3V~8V
- Length :
- 4.9mm
- Supply Voltage :
- 5V
- Terminal Form :
- Gull wing
- Base Part Number :
- TLC2201
- Surface Mount :
- yes
- Height :
- 1.75mm
- Common Mode Rejection Ratio :
- 85 dB
- Input Offset Voltage (Vos) :
- 500μV
- Programmable Power :
- No
- Unity Gain BW-Nom :
- 1900 kHz
- Input Offset Current-Max (IIO) :
- 0.00006μA
- Output Current :
- 50mA
- REACH SVHC :
- No SVHC
- Slew Rate :
- 2.7V/μs
- JESD-609 Code :
- e4
- Width :
- 3.91mm
- Architecture :
- VOLTAGE-FEEDBACK
- Datasheets
- TLC2201CDG4
TLC2201CDG4 Documents

1 Channels 50mA per Channel 1pA 85 dB Instrumentational OP Amps 8V 4.6V~16V ±2.3V~8V TLC2201 8 Pins 8-SOIC (0.154, 3.90mm Width)
TLC2201CDG4 Overview
A 8-SOIC (0.154, 3.90mm Width) case is used to package the op amp. General Purpose-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Tube case. It is estimated that there will be 8 terminations in the next few months. There are a total of 8 pins on this op amp. It is important to remember that this op amp should be operated at a voltage of 5V volts. There are 8 pins on this chip. In terms of the input offset voltage, instrumentation amplifier rates at 500μV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about 0°C~70°C . An 1.1mA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain. There are 1 channels on the operational amplifiers. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. The operating supply voltage of the buffer op amp is rated at 8V. The LinCMOS™ indicates the series number of the op amp.
TLC2201CDG4 Features
8 Pins
supply voltage of 5V
109.97dB voltage gain
Output Type: Rail-to-Rail
TLC2201CDG4 Applications
There are a lot of Texas Instruments
TLC2201CDG4 Instrumentational OP Amps applications.
- Addition operation circuits
- Subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















