THS4505DGKG4
Or copy the link below:
- Mfr.Part #
- THS4505DGKG4
- Manufacturer
- Texas Instruments
- Package / Case
- 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
- Datasheet
- Download
- Description
- IC OPAMP DIFF 1 CIRCUIT 8VSSOP
- Stock
- 10,944
- In Stock ：
- 10,944
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Factory Lead Time :
- 6 Weeks
- Architecture :
- VOLTAGE-FEEDBACK
- Voltage - Input Offset :
- 4mV
- Input Offset Voltage (Vos) :
- 7mV
- Package / Case :
- 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
- Length :
- 3mm
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Bias Current-Max (IIB) @25C :
- 4.6µA
- Gain Bandwidth Product :
- 210MHz
- Dual Supply Voltage :
- 5V
- Resistance :
- 10MOhm
- Number of Elements :
- 1
- Programmable Power :
- No
- Current - Input Bias :
- 4μA
- Lead Free :
- Lead Free
- Width :
- 3mm
- Max Input Voltage :
- -2.7V
- Terminal Position :
- Dual
- Slew Rate :
- 1800V/µs
- Number of Pins :
- 8
- ECCN Code :
- EAR99
- Bandwidth :
- 260MHz
- Number of Terminations :
- 8
- JESD-609 Code :
- e4
- Lifecycle Status :
- ACTIVE (Last Updated: 1 week ago)
- Terminal Form :
- Gull wing
- Max Supply Current :
- 17mA
- -3db Bandwidth :
- 20MHz
- Supply Voltage :
- 5V
- Radiation Hardening :
- No
- Surface Mount :
- yes
- Settling Time :
- 20 ns
- Nominal Supply Current :
- 20mA
- Low-Offset :
- No
- Height :
- 1.07mm
- Frequency Compensation :
- yes
- Micropower :
- No
- Amplifier Type :
- Differential
- Packaging :
- Tube
- RoHS Status :
- ROHS3 Compliant
- Peak Reflow Temperature (Cel) :
- 260
- Max I/O Voltage :
- -7mV
- Number of Functions :
- 1
- Weight :
- 23.303308mg
- Mounting Type :
- Surface Mount
- Base Part Number :
- THS4505
- Max Power Dissipation :
- 385mW
- Output Current per Channel :
- 130mA
- Voltage - Supply, Single/Dual (±) :
- 4.5V~15V ±2.25V~7.5V
- Voltage Gain :
- 54dB
- Neg Supply Voltage-Nom (Vsup) :
- -5V
- Terminal Finish :
- Nickel/Palladium/Gold (Ni/Pd/Au)
- Unity Gain BW-Nom :
- 210000 kHz
- Pin Count :
- 8
- Pbfree Code :
- yes
- Power Dissipation :
- 385mW
- Thickness :
- 970μm
- Common Mode Rejection Ratio :
- 74 dB
- Low-Bias :
- No
- Operating Temperature :
- -40°C~85°C
- Terminal Pitch :
- 0.65mm
- Average Bias Current-Max (IIB) :
- 5.2μA
- Power Supply Rejection Ratio (PSRR) :
- 72dB
- Operating Supply Current :
- 16mA
- Datasheets
- THS4505DGKG4
130mA per Channel 4μA 74 dB Instrumentational OP Amps 5.2μA 4.5V~15V ±2.25V~7.5V THS4505 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
THS4505DGKG4 Overview
In order to protect the op amps, a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case is used. There are two types of operational amplifiers in this circuit. In the case of Tube cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 8. It consists of a total of 8 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. It has 8 pins that make up the linear amplifier. In terms of input offset voltage, operational amplifier rates 7mV. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. In order for this instrumentation amplifier to operate, the supply current needs to be between 16mA and 10 . 54dB should remain the voltage gain. For the operating supply voltage of the op amp ic, there is a rating of 1. It is important to keep the resistance within the 10MOhm range of the linear amplifier.
THS4505DGKG4 Features
8 Pins
supply voltage of 5V
54dB voltage gain
Resistance of 10MOhm
THS4505DGKG4 Applications
There are a lot of Texas Instruments
THS4505DGKG4 Instrumentational OP Amps applications.
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
Manufacturer related products
Catalog related products
Related products
- Follow Us
-
- Payment
-
- Subscribe
- Certification
-
-
