THS4281DBVT
- Mfr.Part #
- THS4281DBVT
- Manufacturer
- Texas Instruments
- Package / Case
- SC-74A, SOT-753
- Datasheet
- Download
- Description
- IC OPAMP VFB 1 CIRCUIT SOT23-5
- Stock
- 8,201
- In Stock :
- 8,201
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Input Offset Voltage (Vos) :
- 2.5mV
- RoHS Status :
- ROHS3 Compliant
- Micropower :
- No
- Lead Free :
- Lead Free
- Operating Supply Current :
- 800μA
- Base Part Number :
- THS4281
- Peak Reflow Temperature (Cel) :
- 260
- Voltage - Input Offset :
- 500μV
- Length :
- 2.9mm
- Operating Temperature :
- -40°C~85°C
- Unity Gain BW-Nom :
- 95000 kHz
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- JESD-609 Code :
- e4
- Settling Time :
- 78 ns
- ECCN Code :
- EAR99
- Frequency Compensation :
- yes
- Current - Input Bias :
- 500nA
- Weight :
- 13.012431mg
- Number of Channels :
- 1
- Width :
- 1.6mm
- Output Current per Channel :
- 60mA
- Terminal Finish :
- Nickel/Palladium/Gold (Ni/Pd/Au)
- Slew Rate :
- 35V/µs
- Input Voltage Noise Density :
- 12.5nV/sqrt Hz
- Amplifier Type :
- Voltage Feedback
- Max Power Dissipation :
- 391mW
- Nominal Supply Current :
- 800μA
- Bandwidth :
- 90MHz
- Mounting Type :
- Surface Mount
- Surface Mount :
- yes
- Radiation Hardening :
- No
- Max I/O Voltage :
- 3.5mV
- Programmable Power :
- No
- Number of Terminations :
- 5
- -3db Bandwidth :
- 3.8MHz
- Voltage Gain :
- 105dB
- Number of Functions :
- 1
- Low-Offset :
- No
- Common Mode Rejection Ratio :
- 85 dB
- REACH SVHC :
- No SVHC
- Low-Bias :
- No
- Package / Case :
- SC-74A, SOT-753
- Gain Bandwidth Product :
- 95MHz
- Terminal Position :
- Dual
- Voltage - Supply, Single/Dual (±) :
- 2.7V~16.5V ±1.35V~8.25V
- Lifecycle Status :
- ACTIVE (Last Updated: 5 days ago)
- Height :
- 1.45mm
- Packaging :
- Tape and Reel (TR)
- Power Supply Rejection Ratio (PSRR) :
- 80dB
- Factory Lead Time :
- 6 Weeks
- Supply Voltage :
- 5V
- Number of Pins :
- 5
- Dual Supply Voltage :
- 5V
- Bias Current-Max (IIB) @25C :
- 0.8μA
- Output Type :
- Rail-to-Rail
- Thickness :
- 1.2mm
- Terminal Form :
- Gull wing
- Power Dissipation :
- 391mW
- Pbfree Code :
- yes
- Input Offset Current-Max (IIO) :
- 0.4μA
- Packing Method :
- TR
- Neg Supply Voltage-Nom (Vsup) :
- -5V
- Pin Count :
- 5
- Datasheets
- THS4281DBVT

1 Channels 60mA per Channel 500nA 85 dB Instrumentational OP Amps 2.7V~16.5V ±1.35V~8.25V THS4281 5 Pins SC-74A, SOT-753
THS4281DBVT Overview
It is packaged in an SC-74A, SOT-753-case that protects the operational amplifiers from damage. An op amp of this type is a Voltage Feedback-type. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. It is estimated that there will be at least 5 terminations this year. A total of 5 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. In total, the buffer amplifier consists of 5 pins. Op amp ic rates 2.5mV for input offset voltage. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. A supply current of 800μA can be used to operate this linear amplifier. There should be no change in the voltage gain at 105dB. There are a total of 1 channels available on the op amps. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. An buffer amplifier is packed in a TR-shape according to the design.
THS4281DBVT Features
5 Pins
supply voltage of 5V
105dB voltage gain
Output Type: Rail-to-Rail
THS4281DBVT Applications
There are a lot of Texas Instruments
THS4281DBVT Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















