THS4131CDGN
- Mfr.Part #
- THS4131CDGN
- Manufacturer
- Texas Instruments
- Package / Case
- 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad
- Datasheet
- Download
- Description
- IC OPAMP DIFF 1 CIRCUIT 8HVSSOP
- Stock
- 1
- In Stock :
- 1
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Low-Bias :
- No
- Number of Channels :
- 1
- Current - Input Bias :
- 2µA
- Packaging :
- Tube
- Weight :
- 24.408939mg
- Width :
- 3mm
- Min Input Voltage :
- 1.23V
- Average Bias Current-Max (IIB) :
- 6µA
- Lead Free :
- Lead Free
- Operating Temperature :
- 0°C~70°C
- ECCN Code :
- EAR99
- Pin Count :
- 8
- Base Part Number :
- THS4131
- Max Power Dissipation :
- 1.71W
- Lifecycle Status :
- ACTIVE (Last Updated: 6 days ago)
- Power Supply Rejection Ratio (PSRR) :
- 73dB
- Number of Terminations :
- 8
- Settling Time :
- 78 ns
- Factory Lead Time :
- 6 Weeks
- Operating Supply Voltage :
- 5V
- Voltage Gain :
- 78dB
- Operating Supply Current :
- 12.3mA
- Resistance :
- 34mOhm
- -3db Bandwidth :
- 80MHz
- Micropower :
- No
- Thickness :
- 1.02mm
- Mounting Type :
- Surface Mount
- Terminal Pitch :
- 0.65mm
- Architecture :
- VOLTAGE-FEEDBACK
- Voltage - Supply, Single/Dual (±) :
- 4V~33V ±2V~16.5V
- Bandwidth :
- 150MHz
- Nominal Supply Current :
- 15mA
- Max Input Voltage :
- -700mV
- Number of Pins :
- 8
- Power Dissipation :
- 1.71W
- JESD-609 Code :
- e4
- Voltage - Input Offset :
- 200μV
- Unity Gain BW-Nom :
- 170000 kHz
- Pbfree Code :
- yes
- Terminal Form :
- Gull wing
- RoHS Status :
- ROHS3 Compliant
- Output Current per Channel :
- 85mA
- Input Offset Current-Max (IIO) :
- 0.5μA
- Max I/O Voltage :
- 2mV
- Radiation Hardening :
- No
- Peak Reflow Temperature (Cel) :
- 260
- Height :
- 1.1mm
- Neg Supply Voltage-Nom (Vsup) :
- -5V
- Slew Rate :
- 52V/μs
- Number of Functions :
- 1
- Surface Mount :
- yes
- Supply Voltage :
- 5V
- Frequency Compensation :
- yes
- Gain Bandwidth Product :
- 225MHz
- Low-Offset :
- No
- Terminal Finish :
- Nickel/Palladium/Gold (Ni/Pd/Au)
- Programmable Power :
- No
- Amplifier Type :
- Differential
- Package / Case :
- 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad
- Bias Current-Max (IIB) @25C :
- 6µA
- REACH SVHC :
- No SVHC
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Length :
- 3mm
- Input Offset Voltage (Vos) :
- 2mV
- Dual Supply Voltage :
- 15V
- Terminal Position :
- Dual
- Common Mode Rejection Ratio :
- 80 dB
- Datasheets
- THS4131CDGN

1 Channels 85mA per Channel 2μA 80 dB Instrumentational OP Amps 6μA 5V 4V~33V ±2V~16.5V THS4131 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad
THS4131CDGN Overview
There is a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad case package that contains the instrumentation amplifiers. The instrumentation amplifier in this picture is of the Differential-type. Upon delivery, op amp ic is packaged in a Tube case. We are approaching the 8h termination of the year. In total, there are 8 pins on this op amp ic. This linear amplifier should be powered by an 5V battery. 8 pins are located on the operational amplifiers. The input offset voltage is 2mV. This electrical part should be mounted using type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around 0°C~70°C . The buffer amplifier is capable of operating from a supply current of 12.3mA . It is recommended to keep the voltage gain at 78dB at all times. On the buffer amps, there are 1 channels that can be used. The operating supply voltage of the buffer op amp is rated at 5V. In order for the op amp resistance to remain within the 34MOhm range, the op amp should be tested.
THS4131CDGN Features
8 Pins
supply voltage of 5V
78dB voltage gain
Resistance of 34MOhm
THS4131CDGN Applications
There are a lot of Texas Instruments
THS4131CDGN Instrumentational OP Amps applications.
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















