THS4061CDGN
- Mfr.Part #
- THS4061CDGN
- Manufacturer
- Texas Instruments
- Package / Case
- 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad
- Datasheet
- Download
- Description
- IC OPAMP VFB 1 CIRCUIT 8HVSSOP
- Stock
- 1,551
- In Stock :
- 1,551
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Bandwidth :
- 180MHz
- Peak Reflow Temperature (Cel) :
- 260
- Packing Method :
- TR
- Thickness :
- 1.02mm
- Frequency Compensation :
- yes
- Lead Free :
- Lead Free
- Terminal Finish :
- Nickel/Palladium/Gold (Ni/Pd/Au)
- Input Offset Voltage (Vos) :
- 8mV
- Unity Gain BW-Nom :
- 180000 kHz
- Slew Rate :
- 400V/µs
- Number of Functions :
- 1
- Operating Supply Current :
- 7.8mA
- Common Mode Rejection Ratio :
- 70 dB
- Micropower :
- No
- Terminal Position :
- Dual
- Terminal Form :
- Gull wing
- Voltage Gain :
- 78.06dB
- Nominal Supply Current :
- 10.5mA
- Pin Count :
- 8
- Programmable Power :
- No
- Neg Supply Voltage-Nom (Vsup) :
- -15V
- Length :
- 3mm
- Bias Current-Max (IIB) @25C :
- 6µA
- -3db Bandwidth :
- 180MHz
- ECCN Code :
- EAR99
- Terminal Pitch :
- 0.65mm
- Gain Bandwidth Product :
- 180MHz
- Height :
- 1.1mm
- Weight :
- 24.408939mg
- Number of Pins :
- 8
- Output Current per Channel :
- 115mA
- Average Bias Current-Max (IIB) :
- 6µA
- Pbfree Code :
- yes
- Factory Lead Time :
- 6 Weeks
- Surface Mount :
- yes
- Amplifier Type :
- Voltage Feedback
- Packaging :
- Cut Tape (CT)
- Low-Bias :
- No
- Settling Time :
- 40 ns
- Voltage - Input Offset :
- 2.5mV
- Number of Elements :
- 1
- Max Power Dissipation :
- 2.14W
- Low-Offset :
- No
- Power Supply Rejection Ratio (PSRR) :
- 70dB
- Number of Terminations :
- 8
- Voltage - Supply, Single/Dual (±) :
- 9V~33V ±4.5V~16.5V
- Input Offset Current-Max (IIO) :
- 0.25μA
- Package / Case :
- 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad
- Current - Input Bias :
- 3μA
- Max I/O Voltage :
- 8mV
- Width :
- 3mm
- Mounting Type :
- Surface Mount
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- JESD-609 Code :
- e4
- Operating Temperature :
- 0°C~70°C
- Supply Voltage :
- 15V
- Radiation Hardening :
- No
- Power Dissipation :
- 2.14W
- RoHS Status :
- ROHS3 Compliant
- Base Part Number :
- THS4061
- Lifecycle Status :
- ACTIVE (Last Updated: 6 days ago)
- Datasheets
- THS4061CDGN

115mA per Channel 3μA 70 dB Instrumentational OP Amps 6μA 9V~33V ±4.5V~16.5V THS4061 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad
THS4061CDGNR Overview
In the package, you will find a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad-case to contain the op amp ic. The instrumentation amplifier in this picture is of the Voltage Feedback-type. A Cut Tape (CT) case is used for delivering the op amp. During the past two weeks, there have been close to 8 terminations. A total of 8 pins are located on this board. This linear amplifier should be powered by an 15V battery. The op amp ic has an array of 8 pins on it. Op amp rates 8mV as input offset voltage. For this electrical component, Surface Mount is the recommended mounting type. According to the manufacturer, this buffer op amp works well at 0°C~70°C , which is a good operating temperature. Using an 7.8mA supply current, this operational amplifier ics can be operated. You should keep the voltage gain at 78.06dB for the time being. 1 elements make up the design of this buffer amplifier. The linear amplifier is packaged by using a TR axis.
THS4061CDGNR Features
8 Pins
supply voltage of 15V
78.06dB voltage gain
THS4061CDGNR Applications
There are a lot of Texas Instruments
THS4061CDGNR Instrumentational OP Amps applications.
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
- Video computer boards
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















