THS4012IDGN
Or copy the link below:
- Mfr.Part #
- THS4012IDGN
- Manufacturer
- Texas Instruments
- Package / Case
- 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad
- Datasheet
- Download
- Description
- IC OPAMP VFB 2 CIRCUIT 8HVSSOP
- Stock
- 1,938
- In Stock ：
- 1,938
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Base Part Number :
- THS4012
- Operating Supply Current :
- 7.8mA
- Height :
- 1.1mm
- Power Supply Rejection Ratio (PSRR) :
- 75dB
- Radiation Hardening :
- No
- Terminal Form :
- Gull wing
- Input Offset Voltage (Vos) :
- 6mV
- Low-Offset :
- No
- Factory Lead Time :
- 6 Weeks
- Length :
- 3mm
- Power Dissipation :
- 2.14W
- Programmable Power :
- No
- Neg Supply Voltage-Max (Vsup) :
- -16.5V
- Packaging :
- Tube
- Common Mode Rejection Ratio :
- 90 dB
- Number of Elements :
- 2
- Peak Reflow Temperature (Cel) :
- 260
- Pbfree Code :
- yes
- Slew Rate :
- 310V/µs
- Supply Voltage Limit-Max :
- 16.5V
- Terminal Finish :
- Nickel/Palladium/Gold (Ni/Pd/Au)
- Settling Time :
- 37 ns
- Supply Voltage :
- 15V
- Terminal Pitch :
- 0.65mm
- Max I/O Voltage :
- 6mV
- ECCN Code :
- EAR99
- Current - Input Bias :
- 2µA
- Amplifier Type :
- Voltage Feedback
- Mounting Type :
- Surface Mount
- Number of Functions :
- 2
- Lead Free :
- Lead Free
- Package / Case :
- 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad
- Thickness :
- 1.02mm
- Neg Supply Voltage-Nom (Vsup) :
- -15V
- Voltage - Supply, Single/Dual (±) :
- 9V~32V ±4.5V~16V
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Voltage Gain :
- 81.58dB
- Nominal Supply Current :
- 19mA
- Bandwidth :
- 290MHz
- Voltage - Input Offset :
- 1mV
- JESD-609 Code :
- e4
- Lifecycle Status :
- ACTIVE (Last Updated: 3 days ago)
- Output Current per Channel :
- 110mA
- Weight :
- 24.408939mg
- Surface Mount :
- yes
- Micropower :
- No
- Width :
- 3mm
- RoHS Status :
- ROHS3 Compliant
- Terminal Position :
- Dual
- Bias Current-Max (IIB) @25C :
- 6µA
- Frequency Compensation :
- yes
- Number of Terminations :
- 8
- Low-Bias :
- No
- Operating Temperature :
- -40°C~85°C
- Unity Gain BW-Nom :
- 290000 kHz
- Pin Count :
- 8
- Number of Pins :
- 8
- Max Power Dissipation :
- 2.14W
- Datasheets
- THS4012IDGN
110mA per Channel 2μA 90 dB Instrumentational OP Amps 9V~32V ±4.5V~16V THS4012 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad
THS4012IDGN Overview
A 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad case is used to package the op amp. Voltage Feedback-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Tube case. It is estimated that there will be 8 terminations in the next few months. There are a total of 8 pins on this op amp. It is important to remember that this op amp should be operated at a voltage of 15V volts. There are 8 pins on this chip. In terms of the input offset voltage, instrumentation amplifier rates at 6mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~85°C . An 7.8mA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain. There are a total of 2 elements in this linear amplifier.
THS4012IDGN Features
8 Pins
supply voltage of 15V
81.58dB voltage gain
THS4012IDGN Applications
There are a lot of Texas Instruments
THS4012IDGN Instrumentational OP Amps applications.
- Addition operation circuits
- Subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
Manufacturer related products
Catalog related products
Related products
- Follow Us
-
- Payment
-
- Subscribe
- Certification
-
-
