SM312FP1H
Or copy the link below:
- Mfr.Part #
- SM312FP1H
- Manufacturer
- Banner Engineering
- Package / Case
- Datasheet
- Download
- Description
- PHOTO SEN FIBER BIPOLAR
- Stock
- 1
- In Stock ：
- 1
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Banner Engineering
- Product Category :
- Optical Sensors - Photoelectric, Industrial
- Light Source :
- Red (650nm)
- Number of Pins :
- 4
- Ingress Protection :
- NEMA 1, 2, 3, 3S, 4, 4X, 6, 12, 13, IEC IP67
- Voltage - Supply :
- 10V~30V
- Max Supply Voltage (DC) :
- 30V
- RoHS Status :
- ROHS3 Compliant
- Width :
- 30.7mm
- Operating Supply Voltage :
- 30V
- Length :
- 42.1mm
- Min Supply Voltage (DC) :
- 10V
- Adjustment Type :
- Adjustable, Potentiometer
- Sensing Method :
- Through-Beam
- Series :
- MINI-BEAM®
- REACH SVHC :
- No SVHC
- Depth :
- 12.2mm
- Connection Method :
- CABLE
- Ratings :
- IP67
- Operating Temperature :
- -20°C~70°C
- Response Time :
- 1ms
- Housing Material :
- Polyester
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Cable Length :
- 78.74 2m
- Published :
- 2004
- Output Configuration :
- NPN/PNP
- Output Current :
- 150mA
- Datasheets
- SM312FP1H
10V~30V MINI-BEAM® Series Adjustable, Potentiometer Through-Beam 4-Pin -20°C~70°C
SM312FP1H Overview
A reliable performance can be assured by setting the temperature of the photoelectric sensor to -20°C~70°C. Electronic components require a voltage of 10V~30V to function in a circuit or system. Photoelectric sensors should have a response time of 1ms. In order for the photoelectric sensor to function, the 4 pins must be connected. A photoelectric sensor must have an output current of 150mA. The photoelectric sensor is not damaged by voltage of 30V applied in DC circuit. As low a voltage as possible, such as 0 volts, can be used for this photoelectric sensor. The photoelectric sensor supply voltage should be set to 30V for maximum efficiency.
SM312FP1H Features
4 pins
Response Time: 1ms
Operating Temperature: -20°C~70°C
MINI-BEAM® Series
Maximal Supply Voltage (DC): 30V
Minimal Supply Voltage (DC): 10V
SM312FP1H Applications
There are a lot of Banner Engineering Corporation
SM312FP1H Photoelectric Sensors applications.
- Counting small objects
- Detecting colours
- Monitoring bigger areas for objects with light grids
- Measuring distance
- Logistics and materials handling
- Automatic doors
- Zone scanners
- Passive infrared sensors
- Luminescence sensors
- Contrast sensors
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
Manufacturer related products
Catalog related products
Related products
- Follow Us
-
- Payment
-
- Subscribe
- Certification
-
-
