OPA4364AIPWT
Or copy the link below:
- Mfr.Part #
- OPA4364AIPWT
- Manufacturer
- Texas Instruments
- Package / Case
- 14-TSSOP (0.173, 4.40mm Width)
- Datasheet
- Download
- Description
- IC CMOS 4 CIRCUIT 14TSSOP
- Stock
- 16,846
- In Stock ：
- 16,846
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Architecture :
- VOLTAGE-FEEDBACK
- Output Type :
- Rail-to-Rail
- Voltage Gain :
- 90dB
- RoHS Status :
- ROHS3 Compliant
- Mounting Type :
- Surface Mount
- Number of Channels :
- 4
- Terminal Finish :
- Nickel/Palladium/Gold (Ni/Pd/Au)
- Voltage - Input Offset :
- 1mV
- JESD-609 Code :
- e4
- Slew Rate :
- 5V/μs
- Supply Voltage :
- 3.6V
- Input Offset Voltage (Vos) :
- 2.5mV
- Operating Supply Voltage :
- 2.75V
- Max I/O Voltage :
- 2.5mV
- Current - Input Bias :
- 1pA
- Terminal Form :
- Gull wing
- Terminal Position :
- Dual
- Packing Method :
- TR
- Nominal Supply Current :
- 5.6mA
- Bias Current-Max (IIB) @25C :
- 0.00001μA
- Power Supplies :
- 2/5V
- Moisture Sensitivity Level (MSL) :
- 2 (1 Year)
- Low-Offset :
- No
- Low-Bias :
- yes
- Length :
- 5mm
- Average Bias Current-Max (IIB) :
- 0.00001μA
- Width :
- 4.4mm
- Amplifier Type :
- GENERAL PURPOSE
- Factory Lead Time :
- 6 Weeks
- Peak Reflow Temperature (Cel) :
- 260
- Number of Terminations :
- 14
- Lifecycle Status :
- ACTIVE (Last Updated: 2 days ago)
- Surface Mount :
- yes
- Common Mode Rejection Ratio :
- 74 dB
- Power Supply Rejection Ratio (PSRR) :
- 81.94dB
- Pbfree Code :
- yes
- Operating Supply Current :
- 1.1mA
- Supply Voltage Limit-Max :
- 5.5V
- Unity Gain BW-Nom :
- 7000 kHz
- Bandwidth :
- 7MHz
- Nominal Gain Bandwidth Product :
- 7MHz
- ECCN Code :
- EAR99
- Programmable Power :
- No
- Frequency Compensation :
- yes
- Number of Pins :
- 14
- Thickness :
- 1mm
- Number of Functions :
- 4
- Operating Temperature :
- -40°C~125°C
- Lead Free :
- Lead Free
- Input Offset Current-Max (IIO) :
- 0.00001μA
- Micropower :
- No
- Output Current per Channel :
- 85mA
- Height :
- 1.2mm
- Pin Count :
- 14
- Package / Case :
- 14-TSSOP (0.173, 4.40mm Width)
- Packaging :
- Cut Tape (CT)
- Radiation Hardening :
- No
- Voltage - Supply, Single/Dual (±) :
- 1.8V~5.5V ±0.9V~2.75V
- Base Part Number :
- OPA4364
- REACH SVHC :
- No SVHC
- Datasheets
- OPA4364AIPWT
4 Channels 85mA per Channel 1pA 74 dB Instrumentational OP Amps 0.00001μA 2.75V 1.8V~5.5V ±0.9V~2.75V OPA4364 14 Pins 14-TSSOP (0.173, 4.40mm Width)
OPA4364AIPWT Overview
It is packaged in an 14-TSSOP (0.173, 4.40mm Width)-case that protects the operational amplifiers from damage. An op amp of this type is a General Purpose-type. As far as the packaging is concerned, buffer op amp is delivered in a Cut Tape (CT) case. It is estimated that there will be at least 14 terminations this year. A total of 14 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 3.6V battery and that the battery should be inserted in the amplifier. In total, the buffer amplifier consists of 14 pins. Op amp ic rates 2.5mV for input offset voltage. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. A supply current of 1.1mA can be used to operate this linear amplifier. There should be no change in the voltage gain at 90dB. There are a total of 4 channels available on the op amps. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. The operating supply voltage of the buffer op amp is rated at 2.75V. An buffer amplifier is packed in a TR-shape according to the design.
OPA4364AIPWT Features
14 Pins
supply voltage of 3.6V
90dB voltage gain
Output Type: Rail-to-Rail
OPA4364AIPWT Applications
There are a lot of Texas Instruments
OPA4364AIPWT Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
Manufacturer related products
Catalog related products
Related products
- Follow Us
-
- Payment
-
- Subscribe
- Certification
-
-
