MIC7300YM5-TR
- Mfr.Part #
- MIC7300YM5-TR
- Manufacturer
- Microchip Technology
- Package / Case
- SC-74A, SOT-753
- Datasheet
- Download
- Description
- IC OPAMP GP 1 CIRCUIT SOT23-5
- Stock
- 1
- In Stock :
- 1
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Number of Amplifiers :
- 1
- Max Operating Temperature :
- 85°C
- Rail to Rail :
- Rail to Rail Input/Output
- Number of Elements :
- 1
- ECCN Code :
- EAR99
- Output Current per Channel :
- 115mA
- REACH SVHC :
- No SVHC
- Seated Height-Max :
- 1.45 mm
- Number of Channels :
- 1
- JESD-609 Code :
- e4
- Number of Functions :
- 1
- Shut Down Support :
- No
- Bandwidth :
- 550 kHz
- Current - Output / Channel :
- 115mA
- Shutdown :
- No Shutdown
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Maximum Input Voltage :
- 10 V
- Supplier Package :
- SOT-23
- Terminal Pitch :
- 0.95 mm
- Product Status :
- Active
- Series :
- IttyBitty®
- Schedule B :
- 8542330000, 8542390000/8542390000/8542390000/8542390000/8542390000
- Voltage Gain :
- 110.63dB
- RoHS :
- Details
- Screening Level :
- Industrial
- Package :
- Tape and Reel (TR);Cut Tape (CT);Digi-Reel®;
- Mounting Type :
- Surface Mount
- Dimensions :
- 3.02 x 1.75 x 1.3mm
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Pin Count :
- 5
- Max Junction Temperature (Tj) :
- 85°C
- Min Operating Temperature :
- -40°C
- Mounting Style :
- SMD/SMT
- Output Type :
- Rail-to-Rail
- Radiation Hardening :
- No
- Product Type :
- Op Amps - Operational Amplifiers
- Current - Supply :
- 1.5mA
- Packaging :
- Tape and Reel (TR)
- Manufacturer :
- Microchip
- Lifecycle Status :
- Production (Last Updated: 2 years ago)
- Base Part Number :
- MIC7300
- Package Type :
- SOT-23
- Supply Voltage Limit-Max :
- 12 V
- Nominal Supply Current :
- 2mA
- Mounting :
- Surface Mount
- Maximum Operating Supply Voltage :
- 10 V
- Amplifier Type :
- GENERAL PURPOSE
- Width :
- 1.6mm
- Surface Mount :
- yes
- Operating Temperature :
- -40°C~85°C
- Product :
- Operational Amplifiers
- Subcategory :
- Amplifier ICs
- Power Supply Rejection Ratio (PSRR) :
- 55dB
- Input Offset Voltage (Vos) :
- 1mV
- Minimum Operating Temperature :
- -40 °C
- Voltage - Input Offset :
- 1mV
- Number of Pins :
- 5
- RoHS Status :
- ROHS3 Compliant
- Power Supply Type :
- Single
- Slew Rate :
- 0.5V/μs
- Factory Lead Time :
- 14 Weeks
- Technology :
- CMOS/Rail to Rail
- JESD-30 Code :
- R-PDSO-G5
- Terminal Finish :
- Nickel/Palladium/Gold (Ni/Pd/Au)
- Current - Input Bias :
- 0.5pA
- Input Offset Voltage-Max :
- 9000 µV
- Package Shape :
- RECTANGULAR
- Reach Compliance Code :
- Compliant
- Length :
- 2.9mm
- Voltage - Supply, Single/Dual (±) :
- 2.2V~10V ±1.1V~5V
- Min Supply Voltage :
- 2.2V
- Gain Bandwidth Product :
- 370kHz
- Input Bias Current :
- 500 fA
- Type :
- High-Output Drive Amplifier
- Qualification Status :
- Not Qualified
- Max Supply Voltage :
- 10V
- Peak Reflow Temperature (Cel) :
- 260
- Operating Supply Current :
- 1.5mA
- Unity Gain BW-Nom :
- 450 kHz
- Operating Supply Voltage :
- 10, 2.2 V
- Height :
- 1.45mm
- Terminal Form :
- Gull wing
- Package / Case :
- SC-74A, SOT-753
- Supplier Device Package :
- SOT-23-5
- Number of Channels per Chip :
- 1
- Maximum Operating Temperature :
- +85 °C
- Product Category :
- Operational Amplifiers - Op Amps
- Temperature Grade :
- Industrial
- Common Mode Rejection Ratio :
- 55 dB
- Base Product Number :
- MIC7300
- Number of Terminals :
- 5
- Input Voltage Range :
- 2.2 → 10 V
- Mount :
- Surface Mount
- Brand :
- Microchip Technology / Atmel
- HTS Code :
- 8542.33.00.01
- Number of Circuits :
- 1
- Terminal Position :
- Dual
- Lead Free :
- Lead Free
- Datasheets
- MIC7300YM5-TR

1 Channels 115mA per Channel 0.5pA 55 dB Instrumentational OP Amps 10, 2.2 V 2.2V~10V ±1.1V~5V MIC7300 5 Pins SC-74A, SOT-753
MIC7300YM5-TR Overview
It is packaged in an SC-74A, SOT-753-case that protects the operational amplifiers from damage. An op amp of this type is a General Purpose-type. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. A total of 5 pins are attached to buffer op amp. A type of Amplifier ICs op amp ic can be identified by the fact that this is a type of Amplifier ICs device. In total, the buffer amplifier consists of 5 pins. Op amp ic rates 1mV for input offset voltage. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. A supply current of 1.5mA can be used to operate this linear amplifier. There should be no change in the voltage gain at 110.63dB. This op amp ic has 1 circuits. There are a total of 1 channels available on the op amps. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. This instrumentation amplifier cannot operate below -40°C degrees Celsius. You should only use op amp buffer at temperatures that are no higher than 85°C. There are 1 elements in this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 10, 2.2 V. For optimal performance, this electrical part should be connected to a supply with a current of 1.5mA. It is important to keep in mind that the power supply voltage of this electric component is below 10V, which is suitable. Keeping the linear amplifier's supply voltage above 2.2V is recommended. Buffer op amp series numbers are indicated by the IttyBitty®. The linear amplifier has 1 amplifiers. There are 5 wire terminals on this op amp ic.
MIC7300YM5-TR Features
5 Pins
110.63dB voltage gain
Output Type: Rail-to-Rail
5Terminations
MIC7300YM5-TR Applications
There are a lot of Microchip Technology
MIC7300YM5-TR Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















