MCP6S22-I/SN
- Mfr.Part #
- MCP6S22-I/SN
- Manufacturer
- Microchip Technology
- Package / Case
- 8-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC OPAMP PGA 2 CIRCUIT 8SOIC
- Stock
- 6,922
- In Stock :
- 6,922
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Special Purpose Amplifiers
- Single Supply Voltage (Min) :
- 2.5(V)
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Voltage Gain dB :
- 30.1(dB)
- Series :
- --
- Package Type :
- SOIC N
- Surface Mount :
- yes
- Qualification Status :
- Not Qualified
- Number of Elements :
- 1
- Number of Pins :
- 8
- Pbfree Code :
- yes
- Base Product Number :
- MCP6S22
- Terminal Finish :
- Matte Tin (Sn)
- Height :
- 1.25mm
- JESD-30 Code :
- R-PDSO-G8
- Lifecycle Status :
- Production (Last Updated: 2 years ago)
- Supplier Device Package :
- 8-SOIC
- Operating Supply Voltage :
- 5V
- Voltage - Input Offset :
- 275μV
- Operating Temperature Classification :
- Industrial
- HTS Code :
- 8542.33.00.01
- Packaging :
- Tube
- Input Offset Voltage :
- 0.275(mV)
- Brand :
- Microchip Technology
- Number of Functions :
- 1
- JESD-609 Code :
- e3
- Voltage - Supply, Single/Dual (±) :
- 2.5V~5.5V
- Published :
- 2003
- Product Type :
- Special Purpose Amplifiers
- Base Part Number :
- MCP6S22
- Rail to Rail :
- Rail to Rail Input/Output
- Product Category :
- Special Purpose Amplifiers
- Pin Count :
- 8
- Dual Supply Voltage (Max) :
- Not Required(V)
- Supply Voltage-Max (Vsup) :
- 5.5 V
- Current - Supply :
- 1mA
- Minimum Operating Temperature :
- -40 °C
- Power Supply Type :
- Single
- Terminal Position :
- Dual
- Number of Circuits :
- 2
- Output Type :
- Rail-to-Rail
- Peak Reflow Temperature (Cel) :
- 260
- Number of Channels :
- 1
- Analog IC - Other Type :
- ANALOG CIRCUIT
- Dimensions :
- 4.9 x 3.9 x 1.25mm
- ECCN Code :
- EAR99
- Operating Temp Range :
- -40C to 85C
- Operating Temperature :
- -40°C~85°C
- Dual Supply Voltage (Typ) :
- Not Required(V)
- Manufacturer :
- Microchip
- Package :
- Tube
- Radiation Hardening :
- No
- Max Supply Voltage :
- 5.5 V
- -3db Bandwidth :
- 12MHz
- Current - Output / Channel :
- 30mA
- Reach Compliance Code :
- Compliant
- REACH SVHC :
- No SVHC
- Package / Case :
- 8-SOIC (0.154, 3.90mm Width)
- Mounting :
- Surface Mount
- Resistance :
- 6.4kOhm
- Supplier Package :
- SOIC N
- Min Supply Voltage :
- 2.5 V
- Terminal Pitch :
- 1.27 mm
- Input Bias Current :
- 0.001(nA)
- Temperature Grade :
- Industrial
- Width :
- 3.9mm
- Slew Rate :
- 22V/µs
- Nominal Supply Current :
- 2mA
- Amplifier Type :
- Programmable Gain
- Power Supply Rejection Ratio (PSRR) :
- 70dB
- Input Offset Voltage (Vos) :
- 275μV
- Dual Supply Voltage (Min) :
- Not Required(V)
- Mounting Type :
- Surface Mount
- Number of Terminals :
- 8
- Maximum Operating Temperature :
- +85 °C
- Number of Terminations :
- 8
- Supply Voltage-Min (Vsup) :
- 2.5 V
- Supply Current-Max (Isup) :
- 1.35 mA
- Terminal Form :
- Gull wing
- Package Shape :
- RECTANGULAR
- RoHS Status :
- ROHS3 Compliant
- Bandwidth :
- 12MHz
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Number of Amplifiers :
- 1
- Rad Hardened :
- No
- Factory Lead Time :
- 9 Weeks
- MSL :
- MSL 1 - Unlimited
- Voltage Gain :
- 30.1dB
- Mount :
- Surface Mount
- Current - Input Bias :
- 1pA
- Mounting Style :
- SMD/SMT
- Length :
- 4.9mm
- Applications :
- Data Acquisition
- RoHS :
- Details
- Product Status :
- Active
- Single Supply Voltage (Typ) :
- 3/5(V)
- Type :
- Programmable Gain Amplifier
- Power Supplies :
- 3/5 V
- Max Operating Temperature :
- 85 °C
- Single Supply Voltage (Max) :
- 5.5(V)
- Number of Channels per Chip :
- 1
- Power Supply Requirement :
- Single
- Seated Height-Max :
- 1.75 mm
- Supply Voltage :
- 4V
- Power Supply Rejection Ratio :
- 70(dB)
- Min Operating Temperature :
- -40 °C
- Datasheets
- MCP6S22-I/SN

1 Channels 1pA Instrumentational OP Amps 5V 2.5V~5.5V MCP6S22 8 Pins 8-SOIC (0.154, 3.90mm Width)
MCP6S22-I/SN Overview
Packaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. A Programmable Gain-type buffer amplifier is shown here. There is a Tube case that is delivered with the instrumentation amplifiers. A total of 8 terminations have been reported in the past few weeks. Buffer amplifier has a total of 8 pins on it. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 4V. An 8-pin op amp ic is included in the package. With regards to the offset voltage of the input, buffer amplifier is rated at 275μV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. Keeping the voltage gain at 30.1dB is the best course of action. The buffer amp consists of 2 circuits in total. 1 channels are available on the instrumentation amplifier. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. This op amp needs to be operated at a temperature of not less than -40 °C degrees Celsius in order to function properly. You should not use op amp above 85 °C degrees. A total of 1 elements are present in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 5V. A supply of 1mA or higher is recommended for use with this electronic part. Regarding the voltage of the supply, this electrical part can work from a voltage as low as 5.5 V, and this is an excellent feature. In order to ensure that the instrumentation amplifier's supply voltage remains above 2.5 V, it is recommended to keep it higher. The -- stands for the buffer op amp's serial number. It is recommended to keep the buffer amps resistance within the range of 6.4kOhm. An analog IC that is also used in this instrumentation amplifier is referred to as the ANALOG CIRCUIT type. As you can see, the linear amplifier has 1 amplifiers. The buffer op amp has 8 terminals that can be used for connecting wires to the amplifier.
MCP6S22-I/SN Features
8 Pins
supply voltage of 4V
30.1dB voltage gain
Output Type: Rail-to-Rail
Resistance of 6.4kOhm
8Terminations
MCP6S22-I/SN Applications
There are a lot of Microchip Technology
MCP6S22-I/SN Instrumentational OP Amps applications.
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















