MCP6S21-I/SN
- Mfr.Part #
- MCP6S21-I/SN
- Manufacturer
- Microchip Technology
- Package / Case
- 8-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC OPAMP PGA 1 CIRCUIT 8SOIC
- Stock
- 7,141
- In Stock :
- 7,141
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Factory Lead Time :
- 9 Weeks
- Time@Peak Reflow Temperature-Max (s) :
- 40
- JESD-30 Code :
- R-PDSO-G8
- Reach Compliance Code :
- Compliant
- Terminal Position :
- Dual
- Mounting :
- Surface Mount
- Dimensions :
- 4.9 x 3.9 x 1.25mm
- Power Supply Type :
- Single
- MSL :
- MSL 1 - Unlimited
- Pin Count :
- 8
- ECCN Code :
- EAR99
- Base Part Number :
- MCP6S21
- Operating Temperature :
- -40°C~85°C
- Series :
- --
- Number of Channels per Chip :
- 1
- Number of Functions :
- 1
- Min Supply Voltage :
- 2.5 V
- Type :
- Programmable Gain Amplifier
- Temperature Grade :
- Industrial
- Voltage - Input Offset :
- 275μV
- Number of Channels :
- 1
- Input Offset Voltage (Vos) :
- 275μV
- Voltage - Supply, Single/Dual (±) :
- 2.5V~5.5V
- Current - Input Bias :
- 1pA
- Width :
- 3.9mm
- Mounting Type :
- Surface Mount
- Maximum Operating Temperature :
- +85 °C
- Product Status :
- Active
- Number of Amplifiers :
- 1
- Number of Terminals :
- 8
- Number of Pins :
- 8
- REACH SVHC :
- No SVHC
- Packaging :
- Tube
- Supply Voltage-Min (Vsup) :
- 2.5 V
- Seated Height-Max :
- 1.75 mm
- Peak Reflow Temperature (Cel) :
- 260
- Max Supply Voltage :
- 5.5 V
- Lifecycle Status :
- Production (Last Updated: 2 years ago)
- Length :
- 4.9mm
- Bandwidth :
- 12MHz
- Supplier Package :
- SOIC N
- Output Type :
- Rail-to-Rail
- Product Type :
- Special Purpose Amplifiers
- Rail to Rail :
- Rail to Rail Input/Output
- Resistance :
- 6.4kOhm
- Terminal Form :
- Gull wing
- Base Product Number :
- MCP6S21
- HTS Code :
- 8542.33.00.01
- Supplier Device Package :
- 8-SOIC
- Mount :
- Surface Mount
- Terminal Pitch :
- 1.27 mm
- Package / Case :
- 8-SOIC (0.154, 3.90mm Width)
- Minimum Operating Temperature :
- -40 °C
- Current - Supply :
- 1mA
- Lead Free :
- Lead Free
- Product Category :
- Special Purpose Amplifiers
- Surface Mount :
- yes
- Input Bias Current :
- 1 pA
- Published :
- 2003
- Slew Rate :
- 22V/µs
- Terminal Finish :
- Matte Tin (Sn)
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Supply Voltage-Max (Vsup) :
- 5.5 V
- Package Shape :
- RECTANGULAR
- Voltage Gain :
- 30.1dB
- Power Supplies :
- 3/5 V
- Package Type :
- SOIC
- Number of Elements :
- 1
- Qualification Status :
- Not Qualified
- Min Operating Temperature :
- -40 °C
- Height :
- 1.25mm
- Supply Current-Max (Isup) :
- 1.35 mA
- JESD-609 Code :
- e3
- Number of Terminations :
- 8
- RoHS Status :
- ROHS3 Compliant
- Operating Supply Voltage :
- 5V
- Mounting Style :
- SMD/SMT
- Number of Circuits :
- 1
- Max Operating Temperature :
- 85 °C
- Supply Voltage :
- 4V
- Brand :
- Microchip Technology / Atmel
- RoHS :
- Details
- Package :
- Tube
- -3db Bandwidth :
- 12MHz
- Pbfree Code :
- yes
- Current - Output / Channel :
- 30mA
- Analog IC - Other Type :
- ANALOG CIRCUIT
- Manufacturer :
- Microchip
- Power Supply Rejection Ratio (PSRR) :
- 70dB
- Amplifier Type :
- Programmable Gain
- Radiation Hardening :
- No
- Datasheets
- MCP6S21-I/SN

1 Channels 1pA Instrumentational OP Amps 5V 2.5V~5.5V MCP6S21 8 Pins 8-SOIC (0.154, 3.90mm Width)
MCP6S21-I/SN Overview
A 8-SOIC (0.154, 3.90mm Width) case is used to package the op amp. Programmable Gain-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Tube case. It is estimated that there will be 8 terminations in the next few months. There are a total of 8 pins on this op amp. It is important to remember that this op amp should be operated at a voltage of 4V volts. There are 8 pins on this chip. In terms of the input offset voltage, instrumentation amplifier rates at 275μV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~85°C . There should be no change in the voltage gain. On this instrumentation amplifier, there are 1 circuits that are connected together. There are 1 channels on the operational amplifiers. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. In order for op amp to function properly, the temperature should not be lower than -40 °C degrees Celsius. Instrumentation amplifier should only be used at temperatures up to 85 °C. There are a total of 1 elements in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 5V. As a recommendation, this electronic component should be used with a power supply that can deliver 1mA. I would like to point out that this electrical component is capable of working from a voltage below 5.5 V as far as the power supply is concerned. As a general rule, it is advisable to keep the op amp's supply voltage above 2.5 V at all times. The -- indicates the series number of the op amp. 6.4kOhm should be the range of resistance for the linear amplifier. There is also another type of analog IC used in this op amp ic that is called a ANALOG CIRCUIT-type IC. In total, there are 1 op amps on the device. In order to connect the buffer amplifier to the wires, it is equipped with 8 terminals.
MCP6S21-I/SN Features
8 Pins
supply voltage of 4V
30.1dB voltage gain
Output Type: Rail-to-Rail
Resistance of 6.4kOhm
8Terminations
MCP6S21-I/SN Applications
There are a lot of Microchip Technology
MCP6S21-I/SN Instrumentational OP Amps applications.
- Addition operation circuits
- Subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















