MCP6N11-010E/SN
- Mfr.Part #
- MCP6N11-010E/SN
- Manufacturer
- Microchip Technology
- Package / Case
- 8-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC INST AMP 1 CIRCUIT 8SOIC
- Stock
- 3,383
- In Stock :
- 3,383
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Number of Terminals :
- 8
- Input Offset Voltage :
- 0.5(mV)
- Lead Free :
- Lead Free
- Power Supply Rejection Ratio (PSRR) :
- 81dB
- Temperature Grade :
- Automotive
- Power Supply Type :
- Single
- Minimum Operating Temperature :
- -40 °C
- Operating Supply Current :
- 800 uA
- ECCN Code :
- EAR99
- Power Supplies :
- 2/5 V
- Voltage - Supply, Single/Dual (±) :
- 1.8V~5.5V
- Single Supply Voltage (Min) :
- 1.8(V)
- Amplifier Type :
- Instrumentation
- Qualification Status :
- Not Qualified
- Length :
- 4.9mm
- Average Bias Current-Max (IIB) :
- 0.005μA
- Nominal Supply Current :
- 800μA
- Input Bias Current :
- 10 pA
- Operating Supply Voltage :
- 5.5, 1.8 V
- Mounting :
- Surface Mount
- Number of Elements :
- 2
- Operating Temperature :
- -40°C~125°C
- Mount :
- Surface Mount
- Voltage Gain :
- 20dB
- REACH SVHC :
- No SVHC
- Supplier Package :
- SOIC N
- Single Supply Voltage (Max) :
- 5.5(V)
- Series :
- --
- Type :
- Instrumentation Amplifier
- Max Supply Voltage :
- 5.5 V
- RoHS :
- Compliant
- Peak Reflow Temperature (Cel) :
- 260
- Brand :
- Microchip Technology / Atmel
- Dual Supply Voltage (Typ) :
- Not Required(V)
- Number of Amplifiers :
- 1
- Number of Pins :
- 8
- Input Offset Voltage-Max :
- 3000 µV
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Mounting Type :
- Surface Mount
- Operating Temperature Classification :
- Automotive
- Min Operating Temperature :
- -40 °C
- MSL :
- MSL 1 - Unlimited
- Common Mode Rejection Ratio :
- 79 dB
- Surface Mount :
- yes
- Single Supply Voltage (Typ) :
- 3.3/5(V)
- Packaging :
- Tube
- Voltage Gain dB :
- 20(dB)
- Package :
- Tube
- Base Part Number :
- MCP6N11
- Mounting Style :
- SMD/SMT
- Dual Supply Voltage (Min) :
- Not Required(V)
- Terminal Pitch :
- 1.27 mm
- Power Supply Requirement :
- Single
- Width :
- 3.9mm
- Maximum Operating Temperature :
- +125 °C
- Supply Voltage Limit-Max :
- 6.5V
- Maximum Supply Current :
- 0.8 mA
- Current - Input Bias :
- 10pA
- Voltage - Input Offset :
- 500μV
- JESD-30 Code :
- R-PDSO-G8
- Schedule B :
- 8542330000, 8542330000/8542330000, 8542330000/8542330000/8542330000, 8542330000/8542330000/8542330000/8542330000
- Radiation Hardening :
- No
- Dimensions :
- 4.9 x 3.9 x 1.25mm
- Terminal Form :
- Gull wing
- Rail to Rail :
- Rail to Rail Input/Output
- Screening Level :
- Extended
- Bandwidth :
- 500 kHz
- Published :
- 2011
- Max Operating Temperature :
- 125 °C
- Number of Functions :
- 1
- Height :
- 1.25mm
- Package Type :
- SOIC N
- -3db Bandwidth :
- 35MHz
- Seated Height-Max :
- 1.75 mm
- Input Offset Voltage (Vos) :
- 500μV
- Factory Lead Time :
- 9 Weeks
- Product Status :
- Active
- Package Shape :
- RECTANGULAR
- Product Category :
- Instrumentation Amplifiers
- Power Supply Rejection Ratio :
- 81(dB)
- Pin Count :
- 8
- Terminal Position :
- Dual
- Subcategory :
- Amplifier ICs
- Current - Supply :
- 800μA
- Non-linearity-Max :
- 0.05%
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Operating Temp Range :
- -40C to 125C
- Gain Bandwidth Product :
- 5MHz
- Product Type :
- Instrumentation Amplifiers
- Base Product Number :
- MCP6N11
- Input Offset Current-Max (IIO) :
- 0.001 µA
- Manufacturer :
- Microchip
- Min Supply Voltage :
- 1.8 V
- Terminal Finish :
- Matte Tin (Sn) - annealed
- RoHS Status :
- ROHS3 Compliant
- Number of Channels :
- 1
- Number of Channels per Chip :
- 1
- Lifecycle Status :
- Production (Last Updated: 2 years ago)
- Supplier Device Package :
- 8-SOIC
- Number of Terminations :
- 8
- Product :
- Instrumentation Amplifiers
- HTS Code :
- 8542.33.00.01
- Output Type :
- Rail-to-Rail
- Reach Compliance Code :
- Compliant
- Common-mode Reject Ratio-Min :
- 62 dB
- Number of Circuits :
- 1
- JESD-609 Code :
- e3
- Dual Supply Voltage (Max) :
- Not Required(V)
- Unity Gain Bandwidth Product (Typ) :
- 5(MHz)
- Slew Rate :
- 9V/µs
- Max Supply Current :
- 800μA
- Rad Hardened :
- No
- Package / Case :
- 8-SOIC (0.154, 3.90mm Width)
- Datasheets
- MCP6N11-010E/SN

1 Channels 10pA 79 dB Instrumentational OP Amps 0.005μA 5.5, 1.8 V 1.8V~5.5V MCP6N11 8 Pins 8-SOIC (0.154, 3.90mm Width)
MCP6N11-010E/SN Overview
In the package, you will find a 8-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. The instrumentation amplifier in this picture is of the Instrumentation-type. A Tube case is used for delivering the op amp. During the past two weeks, there have been close to 8 terminations. A total of 8 pins are located on this board. This particular linear amplifier is a type of Amplifier ICs device, to be precise. The op amp ic has an array of 8 pins on it. Op amp rates 500μV as input offset voltage. For this electrical component, Surface Mount is the recommended mounting type. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. Using an 800 uA supply current, this operational amplifier ics can be operated. You should keep the voltage gain at 20dB for the time being. A instrumentation amplifier like this has 1 circuits. On the buffer amps, there are 1 channels that can be used. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. To operate this buffer amplifier, the temperature must not be lower than -40 °C. A temperature greater than 125 °C should not be used for the operation of buffer amplifier. 2 elements make up the design of this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 5.5, 1.8 V. There is a recommendation that this electrical part be used with a supply with 800µA current rating. This electric component can work from a voltage of under 5.5 V as far as supply voltage is concerned. A voltage of 1.8 V or higher is recommended for the linear amplifier's supply voltage. In this case, -- represents the instrumentation amplifiers' series number. The buffer amplifier consists of 1 amplifiers. 8 wire terminals are provided on this op amp.
MCP6N11-010E/SN Features
8 Pins
20dB voltage gain
Output Type: Rail-to-Rail
8Terminations
MCP6N11-010E/SN Applications
There are a lot of Microchip Technology
MCP6N11-010E/SN Instrumentational OP Amps applications.
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
- Video computer boards
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















