MCP6H92-E/SN
- Mfr.Part #
- MCP6H92-E/SN
- Manufacturer
- Microchip Technology
- Package / Case
- 8-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 2 CIRCUIT 8SOIC
- Stock
- 149
- In Stock :
- 149
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Rail to Rail :
- Rail to Rail Output
- Number of Channels per Chip :
- 2
- Terminal Position :
- Dual
- Mounting Style :
- SMD/SMT
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Gain Bandwidth Product :
- 10MHz
- Current - Supply :
- 2mA
- Manufacturer :
- Microchip
- Supplier Device Package :
- 8-SOIC
- Terminal Form :
- Gull wing
- Screening Level :
- Extended
- Series :
- --
- Low-Offset :
- No
- Number of Circuits :
- 2
- ECCN Code :
- EAR99
- Width :
- 3.9mm
- Maximum Operating Temperature :
- +125 °C
- Unity Gain BW-Nom :
- 10000 kHz
- Voltage - Supply, Single/Dual (±) :
- 3.5V~12V ±1.75V~6V
- Operating Temperature :
- -40°C~125°C
- Qualification :
- AEC-Q100
- Supply Voltage :
- 5V
- Surface Mount :
- yes
- Base Product Number :
- MCP6H92
- Maximum Operating Supply Voltage :
- ±6/12 V
- REACH SVHC :
- No SVHC
- Height :
- 1.5mm
- Type :
- General Purpose Amplifier
- JESD-609 Code :
- e3
- Base Part Number :
- MCP6H92
- Package :
- Tube
- Product :
- Operational Amplifiers
- Common Mode Rejection Ratio :
- 75 dB
- Number of Functions :
- 2
- Published :
- 2012
- Current - Input Bias :
- 10pA
- Max Frequency :
- 10kHz
- Current - Output / Channel :
- 41mA
- Voltage Gain :
- 115dB
- Lead Free :
- Lead Free
- RoHS Status :
- ROHS3 Compliant
- Architecture :
- VOLTAGE-FEEDBACK
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Factory Lead Time :
- 8 Weeks
- Micropower :
- No
- Radiation Hardening :
- No
- Amplifier Type :
- GENERAL PURPOSE
- Output Current per Channel :
- 41 mA
- Operating Supply Voltage :
- 3.5 V to 12 V
- Output Type :
- Rail-to-Rail
- Packaging :
- Tube
- Product Type :
- Op Amps - Operational Amplifiers
- Input Offset Voltage (Vos) :
- 4V
- Shutdown :
- No Shutdown
- Nominal Supply Current :
- 2mA
- Supplier Package :
- SOIC N
- Power Supply Rejection Ratio (PSRR) :
- 75dB
- Minimum Operating Temperature :
- -40 °C
- Peak Reflow Temperature (Cel) :
- 260
- Programmable Power :
- No
- Product Category :
- Operational Amplifiers - Op Amps
- Bandwidth :
- 10MHz
- Product Status :
- Active
- RoHS :
- Details
- Number of Pins :
- 8
- Number of Channels :
- 2
- Pin Count :
- 8
- Frequency Compensation :
- yes
- Low-Bias :
- yes
- Mounting :
- Surface Mount
- Brand :
- Microchip Technology / Atmel
- Supply Voltage Limit-Max :
- 13V
- MSL :
- MSL 1 - Unlimited
- Package Type :
- SOIC
- Length :
- 4.9mm
- Power Supply Type :
- Single/Dual
- Shut Down Support :
- No
- Dimensions :
- 4.9 x 3.9 x 1.5mm
- Terminal Finish :
- Matte Tin (Sn) - annealed
- Slew Rate :
- 10V/μs
- Voltage - Input Offset :
- 1mV
- Package / Case :
- 8-SOIC (0.154, 3.90mm Width)
- Mounting Type :
- Surface Mount
- Number of Terminations :
- 8
- Operating Supply Current :
- 2 mA
- Datasheets
- MCP6H92-E/SN

2 Channels 41 mA per Channel 10pA 75 dB Instrumentational OP Amps 3.5 V to 12 V 3.5V~12V ±1.75V~6V MCP6H92 8 Pins 8-SOIC (0.154, 3.90mm Width)
MCP6H92-E/SN Overview
In the package, you will find a 8-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. The instrumentation amplifier in this picture is of the General Purpose-type. A Tube case is used for delivering the op amp. During the past two weeks, there have been close to 8 terminations. A total of 8 pins are located on this board. This linear amplifier should be powered by an 5V battery. The op amp ic has an array of 8 pins on it. Op amp rates 4V as input offset voltage. For this electrical component, Surface Mount is the recommended mounting type. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. Using an 2 mA supply current, this operational amplifier ics can be operated. You should keep the voltage gain at 115dB for the time being. A instrumentation amplifier like this has 2 circuits. On the buffer amps, there are 2 channels that can be used. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. The operating supply voltage of the buffer op amp is rated at 3.5 V to 12 V. There is a recommendation that this electrical part be used with a supply with 2mA current rating. In this case, -- represents the instrumentation amplifiers' series number.
MCP6H92-E/SN Features
8 Pins
supply voltage of 5V
115dB voltage gain
Output Type: Rail-to-Rail
MCP6H92-E/SN Applications
There are a lot of Microchip Technology
MCP6H92-E/SN Instrumentational OP Amps applications.
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
- Video computer boards
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















