MCP6H02-E/SN
- Mfr.Part #
- MCP6H02-E/SN
- Manufacturer
- Microchip Technology
- Package / Case
- 8-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 2 CIRCUIT 8SOIC
- Stock
- 2,577
- In Stock :
- 2,577
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Slew Rate :
- 0.8V/µs
- Gain Bandwidth Product :
- 1.2MHz
- Qualification Status :
- Not Qualified
- Input Offset Voltage (Vos) :
- 3.5mV
- Qualification :
- AEC-Q100
- Dual Supply Voltage (Min) :
- ±1.75(V)
- Maximum Operating Temperature :
- +125 °C
- Product Type :
- Op Amps - Operational Amplifiers
- Operating Temperature :
- -40°C~125°C
- Rail to Rail :
- Rail to Rail Output
- Packing Method :
- Tube
- Supply Voltage Limit-Max :
- 17V
- Mounting Type :
- Surface Mount
- Terminal Finish :
- Matte Tin (Sn)
- Number of Terminals :
- 8
- Number of Pins :
- 8
- Bandwidth :
- 1.2MHz
- Frequency Compensation :
- yes
- Minimum Operating Temperature :
- -40 °C
- Packaging :
- Tube
- Output Type :
- Rail-to-Rail
- Power Supplies :
- +-1.75/+-8/3.5/16 V
- Current - Output / Channel :
- 50 mA
- Unity Gain BW-Nom :
- 1200 kHz
- Factory Lead Time :
- 8 Weeks
- MSL :
- MSL 1 - Unlimited
- Input Offset Voltage :
- 3.5@16V(mV)
- Operating Temperature Classification :
- Automotive
- Single Supply Voltage (Min) :
- 3.5(V)
- Base Part Number :
- MCP6H02
- Type :
- General Purpose Amplifier
- Average Bias Current-Max (IIB) :
- 0.025 µA
- Nominal Supply Current :
- 135µA
- Number of Channels :
- 2
- Mount :
- Surface Mount
- Architecture :
- VOLTAGE-FEEDBACK
- Supplier Package :
- SOIC N
- Package Shape :
- RECTANGULAR
- Supply Voltage :
- 5V
- Length :
- 4.9mm
- Operating Supply Voltage :
- 8V
- Shutdown :
- No Shutdown
- RoHS :
- Details
- Surface Mount :
- yes
- Single Supply Voltage (Max) :
- 16(V)
- Product Status :
- Active
- Product :
- Operational Amplifiers
- RoHS Status :
- ROHS3 Compliant
- Pin Count :
- 8
- Shut Down Support :
- No
- Number of Channels per Chip :
- 2
- Reach Compliance Code :
- Compliant
- JESD-30 Code :
- R-PDSO-G8
- Supply Current-Max :
- 0.185 mA
- Package :
- Tube
- Power Supply Rejection Ratio :
- 87(dB)
- Number of Terminations :
- 8
- Series :
- --
- Current - Supply :
- 135µA
- Terminal Pitch :
- 1.27 mm
- Dual Supply Voltage (Typ) :
- ±3/±5(V)
- Height :
- 1.25mm
- JESD-609 Code :
- e3
- Output Current :
- 50mA
- Published :
- 2006
- HTS Code :
- 8542.31.00.01
- Rail/Rail I/O Type :
- Rail to Rail Output
- Supplier Device Package :
- 8-SOIC
- Temperature Grade :
- Automotive
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Power Supply Type :
- Single/Dual
- Amplifier Type :
- GENERAL PURPOSE
- Number of Functions :
- 2
- Radiation Hardening :
- No
- Terminal Position :
- Dual
- REACH SVHC :
- No SVHC
- Lead Free :
- Lead Free
- Shut Down Feature :
- No
- Screening Level :
- Extended
- Power Supply Requirement :
- Single/Dual
- Mounting :
- Surface Mount
- Operating Supply Current :
- 135µA
- Voltage - Supply, Single/Dual (±) :
- 3.5V~16V ±1.75V~8V
- ECCN Code :
- 3A991.A.2
- Voltage - Input Offset :
- 700µV
- Number of Elements :
- 2
- Common Mode Rejection Ratio :
- 78 dB
- Package / Case :
- 8-SOIC (0.154, 3.90mm Width)
- Mounting Style :
- SMD/SMT
- Voltage Gain-Min :
- 56234
- Product Category :
- Operational Amplifiers - Op Amps
- Micropower :
- yes
- Brand :
- Microchip Technology / Atmel
- Current - Input Bias :
- 10pA
- Dual Supply Voltage (Max) :
- ±8(V)
- Low-Bias :
- yes
- Supply Type :
- Single, Dual
- Input Offset Voltage-Max :
- 3500 µV
- Voltage Gain :
- 115dB
- Terminal Form :
- Gull wing
- Seated Height-Max :
- 1.75 mm
- Base Product Number :
- MCP6H02
- Maximum Input Offset Current :
- 0.000001(TYP)@16V
- Number of Circuits :
- 2
- Package Type :
- SOIC N
- Peak Reflow Temperature (Cel) :
- NOT SPECIFIED
- Voltage Gain in dB :
- 115(dB)
- Unity Gain Bandwidth Product :
- 1.2
- Power Supply Rejection Ratio (PSRR) :
- 87dB
- Operating Temp Range :
- -40C to 125C
- Output Current per Channel :
- 50mA
- Manufacturer :
- Microchip
- Low-Offset :
- No
- Single Supply Voltage (Typ) :
- 5/9/12/15(V)
- Width :
- 3.9mm
- Rad Hardened :
- No
- Dimensions :
- 4.9 x 3.9 x 1.25mm
- Datasheets
- MCP6H02-E/SN

2 Channels 50mA per Channel 10pA 78 dB Instrumentational OP Amps 0.025 µA 8V 3.5V~16V ±1.75V~8V MCP6H02 8 Pins 8-SOIC (0.154, 3.90mm Width)
MCP6H02-E/SN Overview
In the package, you will find a 8-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. The instrumentation amplifier in this picture is of the General Purpose-type. A Tube case is used for delivering the op amp. During the past two weeks, there have been close to 8 terminations. A total of 8 pins are located on this board. This linear amplifier should be powered by an 5V battery. The op amp ic has an array of 8 pins on it. Op amp rates 3.5mV as input offset voltage. For this electrical component, Surface Mount is the recommended mounting type. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. Using an 135μA supply current, this operational amplifier ics can be operated. You should keep the voltage gain at 115dB for the time being. A instrumentation amplifier like this has 2 circuits. On the buffer amps, there are 2 channels that can be used. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. 2 elements make up the design of this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 8V. The linear amplifier is packaged by using a TUBE axis. There is a recommendation that this electrical part be used with a supply with 135µA current rating. In this case, -- represents the instrumentation amplifiers' series number. In this op amp ic, the minimum voltage gain is 56234. 8 wire terminals are provided on this op amp.
MCP6H02-E/SN Features
8 Pins
supply voltage of 5V
115dB voltage gain
Output Type: Rail-to-Rail
8Terminations
MCP6H02-E/SN Applications
There are a lot of Microchip Technology
MCP6H02-E/SN Instrumentational OP Amps applications.
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
- Video computer boards
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















