MCP660-E/ST
- Mfr.Part #
- MCP660-E/ST
- Manufacturer
- Microchip Technology
- Package / Case
- 14-TSSOP (0.173, 4.40mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 3 CIRCUIT 14TSSOP
- Stock
- 2,838
- In Stock :
- 2,838
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Number of Terminals :
- 14
- Product Status :
- Active
- Minimum Operating Temperature :
- - 40 C
- Supplier Device Package :
- 14-TSSOP
- Height :
- 1.05mm
- Number of Channels :
- 3
- Unity Gain BW-Nom :
- 60000 kHz
- REACH SVHC :
- No SVHC
- Bandwidth :
- 60MHz
- Terminal Finish :
- Matte Tin (Sn) - annealed
- Number of Channels per Chip :
- 3
- Number of Pins :
- 14
- Voltage - Input Offset :
- 1.8mV
- Terminal Pitch :
- 0.65mm
- Product Type :
- Op Amps - Operational Amplifiers
- Number of Terminations :
- 14
- Length :
- 5.1mm
- Gain Bandwidth Product :
- 60MHz
- Supply Voltage :
- 2.5V
- HTS Code :
- 8542.39.00.01
- Average Bias Current-Max (IIB) :
- 0.005μA
- Nominal Supply Current :
- 6mA
- Operating Temperature :
- -40°C~125°C
- Base Product Number :
- MCP660
- Output Current :
- 90mA
- Current - Supply :
- 6mA
- Low-Offset :
- No
- Mounting Style :
- SMD/SMT
- Package Shape :
- RECTANGULAR
- Output Current per Channel :
- 80mA
- Maximum Operating Supply Voltage :
- 5.5 V
- Shutdown :
- No Shutdown
- Frequency Compensation :
- yes
- Product Category :
- Operational Amplifiers - Op Amps
- Power Supply Type :
- Single
- Input Offset Voltage (Vos) :
- 1.8mV
- Input Offset Voltage-Max :
- 8000 µV
- Supply Type :
- Single
- Wideband :
- No
- Qualification :
- AEC-Q100
- Number of Functions :
- 3
- Series :
- --
- Reach Compliance Code :
- Compliant
- Current - Output / Channel :
- 90 mA
- Packing Method :
- Tube
- Base Part Number :
- MCP660
- Low-Bias :
- yes
- Manufacturer :
- Microchip
- Voltage - Supply, Single/Dual (±) :
- 2.5V~5.5V ±1.25V~2.75V
- ECCN Code :
- EAR99
- Micropower :
- No
- Slew Rate :
- 32V/μs
- Published :
- 2011
- Operating Supply Voltage :
- 5.5, 2.5 V
- JESD-30 Code :
- R-PDSO-G14
- Pin Count :
- 14
- Number of Circuits :
- 3
- Architecture :
- VOLTAGE-FEEDBACK
- Package :
- Tube
- Package / Case :
- 14-TSSOP (0.173, 4.40mm Width)
- Surface Mount :
- yes
- Temperature Grade :
- Automotive
- Amplifier Type :
- GENERAL PURPOSE
- Supply Current-Max :
- 27 mA
- Mount :
- Surface Mount
- Lead Free :
- Lead Free
- Voltage Gain-Min :
- 25100
- Supply Voltage Limit-Max :
- 6.5V
- Mounting Type :
- Surface Mount
- RoHS :
- Details
- Current - Input Bias :
- 6pA
- Peak Reflow Temperature (Cel) :
- 260
- Manufacturer Type :
- High Speed Amplifier
- Common Mode Rejection Ratio :
- 64 dB
- Packaging :
- Tube
- Radiation Hardening :
- No
- Type :
- General Purpose Amplifier
- JESD-609 Code :
- e3
- Width :
- 4.5mm
- Product :
- Operational Amplifiers
- Qualification Status :
- Not Qualified
- Power Supply Rejection Ratio (PSRR) :
- 61dB
- Operating Supply Current :
- 6mA
- Power :
- No
- Factory Lead Time :
- 18 Weeks
- Maximum Operating Temperature :
- + 125 C
- Screening Level :
- Extended
- RoHS Status :
- ROHS3 Compliant
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Terminal Form :
- Gull wing
- Voltage Gain :
- 126dB
- Output Type :
- Rail-to-Rail
- Mounting :
- Surface Mount
- Programmable Power :
- No
- Power Supplies :
- 3/5 V
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Shut Down Support :
- No
- Terminal Position :
- Dual
- Brand :
- Microchip Technology / Atmel
- Seated Height-Max :
- 1.2 mm
- Datasheets
- MCP660-E/ST

3 Channels 80mA per Channel 6pA 64 dB Instrumentational OP Amps 0.005μA 5.5, 2.5 V 2.5V~5.5V ±1.25V~2.75V MCP660 14 Pins 14-TSSOP (0.173, 4.40mm Width)
MCP660-E/ST Overview
There is a 14-TSSOP (0.173, 4.40mm Width) case in which the instrumentation amplifier is packaged. Buffer amps of this type are called General Purpose-types. A Tube case is used to deliver the buffer op amp. The number of terminations is approaching the 14 mark. The total number of pins on linear amplifier is 14. The linear amplifier should be run at 2.5V at all times, so please keep that in mind when using it. 14 pins are included on the operational amplifiers. As far as the input offset voltage is concerned, linear amplifier rates at 1.8mV. For this electronic part, it is recommended that you mount it with type Surface Mount. It is important to note that this linear amplifier works well at a temperature of -40°C~125°C when it comes to operating temperatureIt is possible to operate this buffer amplifier from a supply current of 6mA . 126dB should be the voltage gain. A linear amplifier like this has 3 circuits on it. Op amp ic has 3 channels. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. The operating supply voltage of the buffer op amp is rated at 5.5, 2.5 V. For the packing of the instrumentation amplifier, TUBE is adopted. We recommend that you use this electronic part with an 6mA supply in order to get the best performance from it. The -- represents the op amp's series number. This operational amplifier can conduct a voltage gain of up to 25100 at a minimum. A total of 14 terminals are available on this buffer op amp for the connection of wires.
MCP660-E/ST Features
14 Pins
supply voltage of 2.5V
126dB voltage gain
Output Type: Rail-to-Rail
14Terminations
MCP660-E/ST Applications
There are a lot of Microchip Technology
MCP660-E/ST Instrumentational OP Amps applications.
- Subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















