MCP660-E/SL
- Mfr.Part #
- MCP660-E/SL
- Manufacturer
- Microchip Technology
- Package / Case
- 14-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 3 CIRCUIT 14SOIC
- Stock
- 249
- In Stock :
- 249
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Series :
- --
- Output Current per Channel :
- 80mA
- Terminal Pitch :
- 1.27mm
- Published :
- 2012
- Slew Rate :
- 32V/μs
- Number of Pins :
- 14
- Rail/Rail I/O Type :
- Rail to Rail Output
- Voltage Gain-Min :
- 25100
- Pin Count :
- 14
- Product Status :
- Active
- Package Type :
- SOIC N
- Mounting :
- Surface Mount
- Maximum Input Offset Current :
- 0.00001(TYP)@5.5V
- Manufacturer :
- Microchip
- ECCN Code :
- EAR99
- Power Supply Rejection Ratio :
- 61(dB)
- Shutdown :
- No Shutdown
- Supply Voltage :
- 2.5V
- Input Offset Voltage :
- (mV)
- Unity Gain Bandwidth Product :
- 60
- Factory Lead Time :
- 19 Weeks
- Bandwidth :
- 60MHz
- Reach Compliance Code :
- Compliant
- Single Supply Voltage (Max) :
- 5.5(V)
- Amplifier Type :
- GENERAL PURPOSE
- Peak Reflow Temperature (Cel) :
- 260
- Minimum Operating Temperature :
- - 40 C
- Frequency Compensation :
- yes
- Brand :
- Microchip Technology
- Current - Output / Channel :
- 90 mA
- Product :
- Operational Amplifiers
- REACH SVHC :
- No SVHC
- Supplier Device Package :
- 14-SOIC
- Supply Type :
- Single
- Dual Supply Voltage (Typ) :
- Not Required(V)
- Average Bias Current-Max (IIB) :
- 0.005μA
- Rad Hardened :
- No
- Power Supplies :
- 3/5 V
- RoHS :
- Details
- Packing Method :
- Tube
- Package :
- Tube
- Temperature Grade :
- Automotive
- RoHS Status :
- ROHS3 Compliant
- Nominal Supply Current :
- 6mA
- Mount :
- Surface Mount
- Dual Supply Voltage (Max) :
- Not Required(V)
- Single Supply Voltage (Min) :
- 2.5(V)
- Base Part Number :
- MCP660
- Width :
- 3.9mm
- Surface Mount :
- yes
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Voltage - Supply, Single/Dual (±) :
- 2.5V~5.5V ±1.25V~2.75V
- Terminal Form :
- Gull wing
- Qualification :
- AEC-Q100
- Number of Terminals :
- 14
- Radiation Hardening :
- No
- Low-Bias :
- yes
- Supply Voltage Limit-Max :
- 6.5V
- Power Supply Requirement :
- Single
- Input Offset Voltage-Max :
- 8000 µV
- Unity Gain BW-Nom :
- 60000 kHz
- Height :
- 1.25mm
- Low-Offset :
- No
- HTS Code :
- 8542.39.00.01
- Product Type :
- Op Amps - Operational Amplifiers
- Base Product Number :
- MCP660
- Voltage Gain :
- 126dB
- Power Supply Rejection Ratio (PSRR) :
- 61dB
- Qualification Status :
- Not Qualified
- JESD-30 Code :
- R-PDSO-G14
- Terminal Finish :
- Matte Tin (Sn) - annealed
- Operating Supply Voltage :
- 2.5 V to 5.5 V
- Dual Supply Voltage (Min) :
- Not Required(V)
- Power :
- No
- Length :
- 8.65mm
- Supply Current-Max :
- 27 mA
- JESD-609 Code :
- e3
- Product Category :
- Operational Amplifiers - Op Amps
- Mounting Style :
- SMD/SMT
- Number of Elements :
- 3
- Voltage Gain in dB :
- 126(dB)
- Current - Supply :
- 6mA
- Operating Supply Current :
- 6mA
- Packaging :
- Tube
- Architecture :
- VOLTAGE-FEEDBACK
- Output Current :
- 90mA
- Number of Terminations :
- 14
- Current - Input Bias :
- 6pA
- Lead Free :
- Lead Free
- Output Type :
- Rail-to-Rail
- Seated Height-Max :
- 1.75 mm
- Package Shape :
- RECTANGULAR
- Operating Temperature Classification :
- Automotive
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Wideband :
- No
- Terminal Position :
- Dual
- Micropower :
- No
- Number of Functions :
- 3
- Number of Channels :
- 3
- Common Mode Rejection Ratio :
- 64 dB
- Gain Bandwidth Product :
- 60MHz
- Programmable Power :
- No
- Maximum Operating Temperature :
- + 125 C
- Operating Temperature :
- -40°C~125°C
- Package / Case :
- 14-SOIC (0.154, 3.90mm Width)
- Operating Temp Range :
- -40C to 125C
- Input Offset Voltage (Vos) :
- 1.8mV
- Shut Down Feature :
- No
- Number of Circuits :
- 3
- Mounting Type :
- Surface Mount
- Voltage - Input Offset :
- 1.8mV
- Single Supply Voltage (Typ) :
- 3/5(V)
- Datasheets
- MCP660-E/SL

3 Channels 80mA per Channel 6pA 64 dB Instrumentational OP Amps 0.005μA 2.5 V to 5.5 V 2.5V~5.5V ±1.25V~2.75V MCP660 14 Pins 14-SOIC (0.154, 3.90mm Width)
MCP660-E/SL Overview
There is a 14-SOIC (0.154, 3.90mm Width) case in which the instrumentation amplifier is packaged. Buffer amps of this type are called General Purpose-types. A Tube case is used to deliver the buffer op amp. The number of terminations is approaching the 14 mark. The total number of pins on linear amplifier is 14. The linear amplifier should be run at 2.5V at all times, so please keep that in mind when using it. 14 pins are included on the operational amplifiers. As far as the input offset voltage is concerned, linear amplifier rates at 1.8mV. For this electronic part, it is recommended that you mount it with type Surface Mount. It is important to note that this linear amplifier works well at a temperature of -40°C~125°C when it comes to operating temperatureIt is possible to operate this buffer amplifier from a supply current of 6mA . 126dB should be the voltage gain. A linear amplifier like this has 3 circuits on it. Op amp ic has 3 channels. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. There are 3 elements in total in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 2.5 V to 5.5 V. For the packing of the instrumentation amplifier, TUBE is adopted. We recommend that you use this electronic part with an 6mA supply in order to get the best performance from it. The -- represents the op amp's series number. This operational amplifier can conduct a voltage gain of up to 25100 at a minimum. A total of 14 terminals are available on this buffer op amp for the connection of wires.
MCP660-E/SL Features
14 Pins
supply voltage of 2.5V
126dB voltage gain
Output Type: Rail-to-Rail
14Terminations
MCP660-E/SL Applications
There are a lot of Microchip Technology
MCP660-E/SL Instrumentational OP Amps applications.
- Subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















