MCP652-E/MF
- Mfr.Part #
- MCP652-E/MF
- Manufacturer
- Microchip Technology
- Package / Case
- 8-VDFN Exposed Pad
- Datasheet
- Download
- Description
- IC OPAMP GP 2 CIRCUIT 8DFN
- Stock
- 4
- In Stock :
- 4
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Min Supply Voltage :
- 2.5 V
- Programmable Power :
- No
- Input Offset Voltage (Vos) :
- 200μV
- Series :
- mCal Technology
- Product :
- Operational Amplifiers
- Operating Temperature Classification :
- Automotive
- Single Supply Voltage (Min) :
- 2.5(V)
- Package :
- Tube
- Single Supply Voltage (Max) :
- 5.5(V)
- Current - Output / Channel :
- 100mA
- Lifecycle Status :
- Production (Last Updated: 2 years ago)
- Bandwidth :
- 50MHz
- JESD-30 Code :
- S-PDSO-N8
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Brand :
- Microchip Technology
- Terminal Form :
- NO LEAD
- Mounting Type :
- Surface Mount
- Rad Hardened :
- No
- Unity Gain Bandwidth Product :
- 50
- Rail/Rail I/O Type :
- Rail to Rail Output
- Supplier Package :
- DFN EP
- Number of Terminals :
- 8
- Dual Supply Voltage (Min) :
- Not Required(V)
- Micropower :
- No
- Max Operating Temperature :
- 125 °C
- Base Part Number :
- MCP652
- Number of Terminations :
- 8
- Operating Temp Range :
- -40C to 125C
- Terminal Pitch :
- 0.65mm
- Number of Channels :
- 2
- Voltage - Input Offset :
- 200μV
- Lead Free :
- Lead Free
- Number of Pins :
- 8
- Shut Down Feature :
- No
- Low-Bias :
- yes
- Dual Supply Voltage (Max) :
- Not Required(V)
- Supply Type :
- Single
- Length :
- 3mm
- ECCN Code :
- EAR99
- Common Mode Rejection Ratio :
- 65 dB
- Wideband :
- No
- Voltage Gain in dB :
- 123(dB)
- Power Supply Rejection Ratio (PSRR) :
- 61dB
- Pin Count :
- 8
- Low-Offset :
- yes
- Height :
- 880μm
- Surface Mount :
- yes
- Current - Supply :
- 6mA
- Power :
- No
- Power Supplies :
- 3/5V
- Voltage Gain-Min :
- 25100
- JESD-609 Code :
- e3
- Type :
- General Purpose Amplifier
- Output Type :
- Rail-to-Rail
- Mounting Style :
- SMD/SMT
- Shutdown :
- No Shutdown
- Single Supply Voltage (Typ) :
- 3/5(V)
- Packaging :
- Tube
- Number of Elements :
- 2
- Operating Supply Voltage :
- 5.5 V
- Operating Temperature :
- -40°C~125°C
- Package Shape :
- Square
- RoHS Status :
- ROHS3 Compliant
- Voltage - Supply, Single/Dual (±) :
- 2.5V~5.5V
- Mount :
- Surface Mount
- Supplier Device Package :
- 8-DFN-EP (3x3)
- Output Current per Channel :
- 95 mA
- Factory Lead Time :
- 8 Weeks
- Nominal Supply Current :
- 6mA
- RoHS :
- Compliant
- Width :
- 3mm
- Architecture :
- VOLTAGE-FEEDBACK
- Gain Bandwidth Product :
- 50MHz
- Supply Voltage :
- 2.5V
- Packing Method :
- Tube
- Radiation Hardening :
- No
- Average Bias Current-Max (IIB) :
- 0.005μA
- Seated Height-Max :
- 1 mm
- Dual Supply Voltage (Typ) :
- Not Required(V)
- Peak Reflow Temperature (Cel) :
- 260
- Schedule B :
- 8542330000, 8542330000/8542330000, 8542330000/8542330000/8542330000, 8542330000/8542330000/8542330000/8542330000
- Published :
- 2009
- Operating Supply Current :
- 6 mA
- Maximum Operating Temperature :
- + 125 C
- Qualification :
- AEC-Q100
- Amplifier Type :
- GENERAL PURPOSE
- Qualification Status :
- Not Qualified
- Maximum Operating Supply Voltage :
- 5.5 V
- Power Supply Rejection Ratio :
- 61(dB)
- Screening Level :
- Extended
- Slew Rate :
- 30V/µs
- Output Current :
- 95mA
- Manufacturer :
- Microchip
- Product Type :
- Op Amps - Operational Amplifiers
- Maximum Input Offset Current :
- 0.000001(TYP)@5.5V
- Minimum Operating Temperature :
- - 40 C
- Supply Current-Max :
- 18 mA
- Number of Amplifiers :
- 2
- Reach Compliance Code :
- Compliant
- Package / Case :
- 8-VDFN Exposed Pad
- Input Offset Voltage :
- 0.2(mV)
- REACH SVHC :
- No SVHC
- Unity Gain BW-Nom :
- 50000 kHz
- Product Category :
- Operational Amplifiers - Op Amps
- Mounting :
- Surface Mount
- Temperature Grade :
- Automotive
- Max Supply Voltage :
- 5.5 V
- Voltage Gain dB :
- 123 dB
- Base Product Number :
- MCP652
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Input Offset Voltage-Max :
- 200 µV
- Supply Voltage Limit-Max :
- 6.5V
- Product Status :
- Active
- Power Supply Requirement :
- Single
- Number of Functions :
- 2
- Voltage Gain :
- 123dB
- Input Bias Current :
- 0.006(nA)
- Current - Input Bias :
- 6pA
- Number of Channels per Chip :
- 2
- HTS Code :
- 8542.33.00.01
- Package Type :
- DFN EP
- Frequency Compensation :
- yes
- Min Operating Temperature :
- -40 °C
- Terminal Position :
- Dual
- Number of Circuits :
- 2
- Terminal Finish :
- Matte Tin (Sn) - annealed
- Datasheets
- MCP652-E/MF

2 Channels 95 mA per Channel 6pA 65 dB Instrumentational OP Amps 0.005μA 5.5 V 2.5V~5.5V MCP652 8 Pins 8-VDFN Exposed Pad
MCP652-E/MF Overview
In order to protect the op amps, a 8-VDFN Exposed Pad case is used. There are two types of operational amplifiers in this circuit. In the case of Tube cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 8. It consists of a total of 8 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 2.5V battery. It has 8 pins that make up the linear amplifier. In terms of input offset voltage, operational amplifier rates 200μV. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. In order for this instrumentation amplifier to operate, the supply current needs to be between 6 mA and 10 . Maintain 123dB as the voltage gain. In total, there are 2 circuits on this buffer amplifier. Buffer op amp is equipped with 2 channels on the device. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. It is recommended that the temperature of this op amp ic should not fall below -40 °C degrees Fahrenheit at any time. Linear amplifier shouldn't be used above 125 °C degrees. As a whole, there are 2 elements that make up this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 5.5 V. As a result of this, the buffer amplifier is packed in TUBE. This electronic part is recommended to be used with an 6mA supply for best performance. When it comes to the voltage from which this electrical part will operate, it can operate at a maximum of less than 5.5 V. It is recommended that you keep the instrumentation amplifier's supply voltage higher than 2.5 V when using it. mCal Technology is the number that corresponds to the series of the buffer op amp. A minimum voltage gain of 25100 is the minimum voltage gain that this instrumentation amplifier is capable of producing. A linear amplifier such as this has 2 amplifiers on it. As part of this op amp ic, there are 8 terminals on which wires can be connected.
MCP652-E/MF Features
8 Pins
supply voltage of 2.5V
123dB voltage gain
Output Type: Rail-to-Rail
8Terminations
MCP652-E/MF Applications
There are a lot of Microchip Technology
MCP652-E/MF Instrumentational OP Amps applications.
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















