MCP651T-E/MNY
- Mfr.Part #
- MCP651T-E/MNY
- Manufacturer
- Microchip Technology
- Package / Case
- 8-WFDFN Exposed Pad
- Datasheet
- Download
- Description
- IC OPAMP GP 1 CIRCUIT 8TDFN
- Stock
- 14,788
- In Stock :
- 14,788
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Terminal Finish :
- Nickel/Palladium/Gold (Ni/Pd/Au)
- Power Supplies :
- 3/5 V
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Height :
- 787.4μm
- Input Offset Voltage-Max :
- 200 µV
- Voltage - Input Offset :
- 200μV
- JESD-609 Code :
- e4
- Operating Supply Voltage :
- 2.2 V to 5.5 V
- Voltage - Supply, Single/Dual (±) :
- 2.5V~5.5V
- Package Shape :
- RECTANGULAR
- Surface Mount :
- yes
- Technology :
- CMOS
- Bandwidth :
- 50MHz
- Radiation Hardening :
- No
- Length :
- 1.9812mm
- Programmable Power :
- No
- Product :
- Operational Amplifiers
- Input Offset Voltage (Vos) :
- 200μV
- Factory Lead Time :
- 9 Weeks
- Mounting Style :
- SMD/SMT
- Temperature Grade :
- Automotive
- Published :
- 2011
- Base Part Number :
- MCP651
- Qualification Status :
- Not Qualified
- Current - Supply :
- 6mA
- Width :
- 2.9972mm
- Shutdown :
- No Shutdown
- Product Type :
- Op Amps - Operational Amplifiers
- Operating Temperature :
- -40°C~125°C
- Terminal Pitch :
- 0.5 mm
- Qualification :
- AEC-Q100
- Package / Case :
- 8-WFDFN Exposed Pad
- Low-Offset :
- yes
- Packaging :
- Tape and Reel (TR)
- Voltage Gain :
- 123dB
- Nominal Supply Current :
- 6mA
- RoHS :
- Details
- Supply Voltage Limit-Max :
- 6.5 V
- Mounting Type :
- Surface Mount
- Number of Circuits :
- 1
- Base Product Number :
- MCP651
- Number of Terminals :
- 8
- JESD-30 Code :
- R-PDSO-N8
- Number of Pins :
- 8
- Output Current :
- 95mA
- Gain Bandwidth Product :
- 50MHz
- Product Status :
- Active
- Package :
- Tape and Reel (TR);Cut Tape (CT);Digi-Reel®;
- Wideband :
- No
- Lead Free :
- Lead Free
- Power :
- No
- Reach Compliance Code :
- Compliant
- Output Type :
- Rail-to-Rail
- Operating Supply Current :
- 6 mA
- Subcategory :
- Amplifier ICs
- Manufacturer :
- Microchip
- REACH SVHC :
- No SVHC
- Current - Input Bias :
- 6pA
- Frequency Compensation :
- yes
- Supplier Device Package :
- 8-TDFN (2x3)
- Micropower :
- No
- Mount :
- Surface Mount
- Brand :
- Microchip Technology
- Product Category :
- Operational Amplifiers - Op Amps
- Terminal Position :
- Dual
- Architecture :
- VOLTAGE-FEEDBACK
- Common Mode Rejection Ratio :
- 65 dB
- RoHS Status :
- ROHS3 Compliant
- Power Supply Rejection Ratio (PSRR) :
- 61dB
- Series :
- mCal Technology
- Number of Channels :
- 1
- Maximum Operating Temperature :
- + 125 C
- Supply Type :
- Single
- Current - Output / Channel :
- 100mA
- Supply Current-Max :
- 9 mA
- Amplifier Type :
- GENERAL PURPOSE
- Slew Rate :
- 30V/µs
- Output Current per Channel :
- 95 mA
- Terminal Form :
- NO LEAD
- Minimum Operating Temperature :
- - 40 C
- Packing Method :
- Tape and Reel
- Low-Bias :
- yes
- Voltage Gain-Min :
- 25100
- Number of Functions :
- 1
- Datasheets
- MCP651T-E/MNY

1 Channels 95 mA per Channel 6pA 65 dB Instrumentational OP Amps 2.2 V to 5.5 V 2.5V~5.5V MCP651 8-WFDFN Exposed Pad
MCP651T-E/MNY Overview
In the package, you will find a 8-WFDFN Exposed Pad-case to contain the op amp ic. The instrumentation amplifier in this picture is of the General Purpose-type. A Tape & Reel (TR) case is used for delivering the op amp. This particular linear amplifier is a type of Amplifier ICs device, to be precise. The op amp ic has an array of 8 pins on it. Op amp rates 200μV as input offset voltage. For this electrical component, Surface Mount is the recommended mounting type. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. Using an 6 mA supply current, this operational amplifier ics can be operated. You should keep the voltage gain at 123dB for the time being. A instrumentation amplifier like this has 1 circuits. On the buffer amps, there are 1 channels that can be used. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. The operating supply voltage of the buffer op amp is rated at 2.2 V to 5.5 V. The linear amplifier is packaged by using a TAPE AND REEL axis. There is a recommendation that this electrical part be used with a supply with 6mA current rating. In this case, mCal Technology represents the instrumentation amplifiers' series number. In this op amp ic, the minimum voltage gain is 25100. 8 wire terminals are provided on this op amp.
MCP651T-E/MNY Features
123dB voltage gain
Output Type: Rail-to-Rail
8Terminations
MCP651T-E/MNY Applications
There are a lot of Microchip Technology
MCP651T-E/MNY Instrumentational OP Amps applications.
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
- Video computer boards
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















